Resource temporarily unavailable auto=route

I use the auto=route to bild a automatic conetion to a host
If I try to use the conection first time I get Resource
temporarily unavailable on the 2. time all works fine. I use
now a ping to open the tunnel but It is not the way I like

>ping sechost
connect: Resource temporarily unavailable
> # ping sechost
PING xxxxxx (xx.xx.xx.xx) 56(84) bytes of data.
64 bytes from xxxxxx (xx.xx.xx.xx): icmp_seq=1 ttl=64
time=67.1 ms
64 bytes from xxxxxx (xx.xx.xx.xx): icmp_seq=2 ttl=64
time=66.5 ms

my configuration openswan 2.4.7

ipsec.conf 

version 2.0 

config setup
        nat_traversal=yes
        interfaces=%defaultroute
       
virtual_private=%v4:10.0.0.0/8,%v4:172.16.0.0/12,%v4:192.168
.0.0/16
        fragicmp=yes
        plutowait=yes

conn %default
        keyingtries=1
        authby=rsasig
        compress=yes
        leftrsasigkey=%cert
        rightrsasigkey=%cert
        disablearrivalcheck=no

conn tunnel
                left=%defaultroute
                leftsubnet=192.168.3.2/32
                leftnexthop=192.168.3.1
                leftcert=tunnel-cert.pem
                right=xxx.xxx.xxx.xxx
                rightcert=tunnel2.pem
                auto=route
                pfs=yes
                dpddelay=30
                dpdtimeout=120
                keylife=8m
                rekey=no



-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu
sparen! 
Ideal für Modem und ISDN: http://www.gmx.n
et/de/go/smartsurfer
_______________________________________________
Usersopenswan.org
http
://lists.openswan.org/mailman/listinfo/users
Building and Integrating Virtual Private Networks with
Openswan: 
http://www.amazon.com/gp/product/1904811
256/104-3099591-2946327?n=283155

On Tue, 28 Nov 2006, frage schnell wrote:

> I use the auto=route to bild a automatic conetion to a
host
> If I try to use the conection first time I get Resource
temporarily unavailable on the 2. time all works fine. I use
now a ping to open the tunnel but It is not the way I like

Did you include /etc/ipsec.d/examples/no_oe.conf ?

Paul
-- 
Building and integrating Virtual Private Networks with
Openswan:
http://www.amazon.com/gp/product/1904811
256/104-3099591-2946327?n=283155
_______________________________________________
Usersopenswan.org
http
://lists.openswan.org/mailman/listinfo/users
Building and Integrating Virtual Private Networks with
Openswan: 
http://www.amazon.com/gp/product/1904811
256/104-3099591-2946327?n=283155

-------- Original-Nachricht --------
Datum: Thu, 30 Nov 2006 01:30:05 +0100 (CET)
Von: Paul Wouters <paulxelerance.com>
An: frage schnell <frage.schnell1gmx.de>
Betreff: Re: [Openswan Users] Resource temporarily
unavailable auto=route

> On Tue, 28 Nov 2006, frage schnell wrote:
> 
> > I use the auto=route to bild a automatic conetion
to a host
> > If I try to use the conection first time I get
Resource temporarily
> unavailable on the 2. time all works fine. I use now a
ping to open the tunnel
> but It is not the way I like
> 
> Did you include /etc/ipsec.d/examples/no_oe.conf ?
> 
> Paul
> -- 
> Building and integrating Virtual Private Networks with
Openswan:
> http://www.amazon.com/gp/product/1904811
256/104-3099591-2946327?n=283155
 I tied both with the same result

-- 
"Ein Herz für Kinder" - Ihre Spende hilft! Aktion:
www.deutschlandsegelt.de
Unser Dankeschön: Ihr Name auf dem Segel der 1. deutschen
America's Cup-Yacht!
_______________________________________________
Usersopenswan.org
http
://lists.openswan.org/mailman/listinfo/users
Building and Integrating Virtual Private Networks with
Openswan: 
http://www.amazon.com/gp/product/1904811
256/104-3099591-2946327?n=283155