Re: ATM and Ethernet Question

Hi Robert,

Wasn't sure exactly which bit to remove so I tried removing
the "atm
route-bridged ip" first from the config but still no
Layer 2 between
both end points. I then put it back in and then removed
"encapsulation
aal5snap". And lastly I removed both lines from the
config. No joy with
any of these combinations.

I saw this Cisco article about using Layer 2 Local
Switching
(Configuring ATM-to-Ethernet VLAN Mode Local Switching) at:

http://www.cisco.com/en/US/docs/ios/12_0
s/feature/guide/fslocal.html#wp1
110021

Our router is a 7301 and it appears I need to downgrade the
IOS on our
router (using 12.3(24)) to a 12.2 release as advised by
Cisco's Feauture
Navigator tool - no really sure if this is a good idea.

Thanks for your help.

Cheers.

Andy


-----Original Message-----
From: Robert Blayzor [mailto:rblayzor.bulkinoc.net]

Sent: Monday, 21 April 2008 9:54 PM
To: Andy Saykao
Cc: cisco-bbapuck.nether.net
Subject: Re: [cisco-bba] ATM and Ethernet Question

On Apr 21, 2008, at 1:09 AM, Andy Saykao wrote:
> bridge irb
> bridge 2 protocol ieee
> bridge 2 route ip
> !
> interface ATM1/0.304470 point-to-point  description ATM
VC  bandwidth 
> 2048  atm route-bridged ip  bridge-group 2  pvc 10/100
>   ubr 2048
>   encapsulation aal5snap
> !
>


I believe you need to remove the route-bridged
encapsulation.

--
Robert Blayzor, BOFH
INOC, LLC
rblayzorinoc.net
http://www.inoc.net/~r
blayzor/

Mac OS X. Because making Unix user-friendly is easier than
debugging
Windows.







____________________________________________________________
__________
This email has been scanned by the MessageLabs Email
Security System.
For more information please visit http://www.messagela
bs.com/email
____________________________________________________________
__________

This email and any files transmitted with it are
confidential and intended solely for the 
use of the individual or entity to whom they are addressed.
Please notify the sender 
immediately by email if you have received this email by
mistake and delete this email 
from your system. Please note that any views or opinions
presented in this email are solely
 those of the author and do not necessarily represent those
of the organisation. 
Finally, the recipient should check this email and any
attachments for the presence of 
viruses. The organisation accepts no liability for any
damage caused by any virus 
transmitted by this email. 

_______________________________________________
cisco-bba mailing list
cisco-bbapuck.nether.net
ht
tps://puck.nether.net/mailman/listinfo/cisco-bba