|
We have a large Cisco based video network running the h323 feature set. For testing I have the Gnugk Box registering into Cisco Gatekeeper 1 as an endpoint. I then have a Polycom unit registering into the Gnugk box, as below. When I call out from EP1 to EP2 the call gets routed properly (eg. EP1 à Gnugk à Cisco Gatekeeper 1 à Cisco Gatekeeper 2 à EP2). But when I call EP1 from EP2, Cisco Gatekeeper 1 is bypassed by Cisco Gatekeeper 2. (eg EP1 <-- Gnugk <-- Cisco Gatekeeper 2 <-- EP2). Im guessing a configuration on the Cisco Side. Anyone have any input on this? A hint? Or even point me in a certain direction.
EP1 --à Gnugk --à Cisco Gatekeeper 1 ---- Cisco Gatekeeper 2 <---- EP2
[Gatekeeper::Main]
Fourtytwo=42
Name=Gnugk
[GkStatus::Auth]
rule=allow
[RasSrv::Neighbors]
GK2=205.xxx.xx.xx;*
[Endpoint]
Gatekeeper=205.xxx.xx.xx
Type=Gateyway
RRQRetryInterval=10
Prefix=*
Vendor=Cisco
TimeToLive=900
Discovery=0
Thanks in advance.
Sean Salomon
|