please help !!!

Does it vibrate for a few seconds when you first reset it?
If so, you should
be able to connect to it by serial. Do you have
hyperterminal configured to
115200 baud, 8 data bits, no parity, 1 stop bit, no flow
control?

What *exactly* happens when you hard reset it?

Also, please do not double post.

joshua


On Fri, 7 Jul 2006, Meir Livneh wrote:

> My Ipaq is dead.
> Please help
>
>
> -----Original Message-----
> From: Meir Livneh
> Sent: Friday, July 07, 2006 11:46 AM
> To: 'Chris Weiss'
> Cc: bootldrhandhelds.org; familiarhandhelds.org; ipaqhandhelds.org
> Subject: RE: [Familiar] BOOTLDR (2) -a catastrophy
>
> Removed the battery and put it back
> My Ipaq is now dead!!
> Nothing beyond the HP Ipaq initial screen
>
>
>
> -----Original Message-----
> From: Meir Livneh
> Sent: Friday, July 07, 2006 11:33 AM
> To: 'Chris Weiss'
> Subject: RE: [Familiar] BOOTLDR (2)
>
> Chris
>
> Thanks for your help.
> Yes, I did connect it using a serial cradle and the
Windows Hypertrm
> application (configured to the specs in the
installation document).
> Pressing the "calendar" button on the Ipaq
does not show the prompt symbol on
> the Hypertrm screen.
> Installing a different windows terminal application did
not help either.
> I then booted Ubuntu on my PC and tried the Linux way,
nothing again.
> My Ipaq is now crippled, 10-15 minutes after resetting
it, it starts
> vibrating and buzzing, soft/hard reset have no effect
on this phenomena.
>
> meir
>
> _______________________________________________
> Bootldr mailing list
> Bootldrhandhelds.org
> http://
handhelds.org/mailman/listinfo/bootldr
>
_______________________________________________
Bootldr mailing list
Bootldrhandhelds.org
http://
handhelds.org/mailman/listinfo/bootldr