List Info

Thread: Ekiga test call - "beeeep!"
Ekiga test call - "beeeep!"
user name
 2006-06-07 15:12:35 

  


  

    Hello, fellow gnomemeeters.

I've recently been trying to run the test call (sip:500ekiga.net) to check that my configuration works.

However when I try to do so, all I receive is one beep every four or so seconds.  It is often impossible to "hang up" - the beeping continues!

I have also set up and tried to do the a Wengo call (sip:333), to see whether it was my Ekiga account's fault.  I changed proxy settings, STUN settings and port - but still receive only one beep every four or so seconds.

Is there some vital aspect I have left out in setting up Ekiga?  It seems to be working for most other people.
 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

  

  
  
   
     
    

  

    Ekiga test call - "beeeep!"
  


  

     user name

     2006-06-07 15:25:53
  


  

    
On Wednesday 07 June 2006 22:12, Andrew Burns wrote:
> I've recently been trying to run the test call
(sip:500ekiga.net) to check that my configuration works.
> However when I try to do so, all I receive is one beep
every four or so seconds.  It is often impossible to
"hang up" - the beeping continues!

I have just upgraded ekiga/opal/pwlib to the latest versions
and get the same
kind of thing. I call 500ekiga.net, get two beeps
and then ekiga hangs. Clicking hang-up
causes just that: a complete hang-up and ekiga must be
killed! With ekiga 2.0.1 at least
you connect to the echo test.

-Robin.
-- 
------------------------------------------------------------
----------
Robin Atwood.

"Ship me somewheres east of Suez, where the best is
like the worst,
 Where there ain't no Ten Commandments an' a man can raise
a thirst"
         from "Mandalay" by Rudyard Kipling
------------------------------------------------------------
----------








_______________________________________________
GnomeMeeting-list mailing list
GnomeMeeting-listgnome.org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list



  


  

    
  

  
  
   
     
    

  

    Ekiga test call - "beeeep!"
  


  

     user name

     2006-06-07 18:47:39
  


  

    
Le mercredi 07 juin 2006 à 22:25 +0700, Robin Atwood a écrit
:
> On Wednesday 07 June 2006 22:12, Andrew Burns wrote:
> > I've recently been trying to run the test call
(sip:500ekiga.net) to check that my configuration works.
> > However when I try to do so, all I receive is one
beep every four or so seconds.  It is often impossible to
"hang up" - the beeping continues!
> 
> I have just upgraded ekiga/opal/pwlib to the latest
versions and get the same
> kind of thing. I call 500ekiga.net, get two beeps
and then ekiga hangs. Clicking hang-up
> causes just that: a complete hang-up and ekiga must be
killed! With ekiga 2.0.1 at least
> you connect to the echo test.
> 

Wouldn't you be using ALSA 1.0.11 which would have been
upgraded with
Ekiga?


-- 
 _      Damien Sandras
(o-     
//\     Ekiga Softphone: http://www.ekiga.org/
v_/_    FOSDEM 2006    : http://www.fosdem.org/
        SIP Phone      : sip:dsandrasekiga.net
                         sip:600000ekiga.net

_______________________________________________
GnomeMeeting-list mailing list
GnomeMeeting-listgnome.org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list



  


  

    
  

  
  
   
     
    

  

    Ekiga test call - "beeeep!"
  


  

     user name

     2006-06-07 19:02:00
  


  

    
Le mercredi 07 juin 2006 à 08:12 -0700, Andrew Burns a écrit
:
> Hello, fellow gnomemeeters.
> 
> I've recently been trying to run the test call
(sip:500ekiga.net) to
> check that my configuration works.
> 
> However when I try to do so, all I receive is one beep
every four or
> so seconds.  It is often impossible to "hang
up" - the beeping
> continues!
> 
> I have also set up and tried to do the a Wengo call
(sip:333), to see
> whether it was my Ekiga account's fault.  I changed
proxy settings,
> STUN settings and port - but still receive only one
beep every four or
> so seconds.
> 
> Is there some vital aspect I have left out in setting
up Ekiga?  It
> seems to be working for most other people.
> 

What is your version of ALSA? (of Libasound actually)


> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection
around 
> http://mail.yahoo.com 
> 
> _______________________________________________
> GnomeMeeting-list mailing list
> GnomeMeeting-listgnome.org
> http://mail.gnome.org/mailman/listinfo/gnomemeeting-list

-- 
 _      Damien Sandras
(o-     
//\     Ekiga Softphone: http://www.ekiga.org/
v_/_    FOSDEM 2006    : http://www.fosdem.org/
        SIP Phone      : sip:dsandrasekiga.net
                         sip:600000ekiga.net

_______________________________________________
GnomeMeeting-list mailing list
GnomeMeeting-listgnome.org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list



  


  

    
  

  
  
   
     
    

  

    Ekiga test call - "beeeep!"
  


  

     user name

     2006-06-07 21:40:29
  


  

    
On Thursday 08 June 2006 01:47, Damien Sandras wrote:
> Le mercredi 07 juin 2006 à 22:25 +0700, Robin Atwood a
écrit :
> > On Wednesday 07 June 2006 22:12, Andrew Burns
wrote:
> > > I've recently been trying to run the test
call (sip:500ekiga.net) to check that my configuration
works.
> > > However when I try to do so, all I receive is
one beep every four or so seconds.  It is often impossible
to "hang up" - the beeping continues!
> > 
> > I have just upgraded ekiga/opal/pwlib to the
latest versions and get the same
> > kind of thing. I call 500ekiga.net, get two beeps
and then ekiga hangs. Clicking hang-up
> > causes just that: a complete hang-up and ekiga
must be killed! With ekiga 2.0.1 at least
> > you connect to the echo test.
> > 
> 
> Wouldn't you be using ALSA 1.0.11 which would have
been upgraded with
> Ekiga?

No, my ALSA is from the CVS  last week as per previous
recommendations. 

-Robin.
-- 
------------------------------------------------------------
----------
Robin Atwood.

"Ship me somewheres east of Suez, where the best is
like the worst,
 Where there ain't no Ten Commandments an' a man can raise
a thirst"
         from "Mandalay" by Rudyard Kipling
------------------------------------------------------------
----------








_______________________________________________
GnomeMeeting-list mailing list
GnomeMeeting-listgnome.org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list



  


  

    
  

  
  
   
     
    

  

    Ekiga test call - "beeeep!"
  


  

     user name

     2006-06-08 08:11:53
  


  

    
Le jeudi 08 juin 2006 à 04:40 +0700, Robin Atwood a écrit :
> On Thursday 08 June 2006 01:47, Damien Sandras wrote:
> > Le mercredi 07 juin 2006 à 22:25 +0700, Robin
Atwood a écrit :
> > > On Wednesday 07 June 2006 22:12, Andrew Burns
wrote:
> > > > I've recently been trying to run the
test call (sip:500ekiga.net) to check that my configuration
works.
> > > > However when I try to do so, all I
receive is one beep every four or so seconds.  It is often
impossible to "hang up" - the beeping continues!
> > > 
> > > I have just upgraded ekiga/opal/pwlib to the
latest versions and get the same
> > > kind of thing. I call 500ekiga.net, get two beeps and then ekiga hangs.
Clicking hang-up
> > > causes just that: a complete hang-up and
ekiga must be killed! With ekiga 2.0.1 at least
> > > you connect to the echo test.
> > > 
> > 
> > Wouldn't you be using ALSA 1.0.11 which would
have been upgraded with
> > Ekiga?
> 
> No, my ALSA is from the CVS  last week as per previous
recommendations. 
> 

Then probably CVS is broken again for ALSA...

Could you please provide more debug information so that we
can confirm
it or not? (backtrace, debug 4 output, ...)
-- 
 _      Damien Sandras
(o-     
//\     Ekiga Softphone: http://www.ekiga.org/
v_/_    FOSDEM 2006    : http://www.fosdem.org/
        SIP Phone      : sip:dsandrasekiga.net
                         sip:600000ekiga.net

_______________________________________________
GnomeMeeting-list mailing list
GnomeMeeting-listgnome.org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list



  


  

    
  

  
  
   
     
    

  

    Ekiga test call - "beeeep!"
  


  

     user name

     2006-06-08 14:20:42
  


  

    
On Thursday 08 June 2006 15:11, Damien Sandras wrote:
> Le jeudi 08 juin 2006 à 04:40 +0700, Robin Atwood a
écrit :
> > On Thursday 08 June 2006 01:47, Damien Sandras
wrote:
> > > Le mercredi 07 juin 2006 à 22:25 +0700, Robin
Atwood a écrit :
> > > > On Wednesday 07 June 2006 22:12, Andrew
Burns wrote:
> > > > > I've recently been trying to run
the test call (sip:500ekiga.net) to check that my configuration
works.
> > > > > However when I try to do so, all I
receive is one beep every four or so seconds.  It is often
impossible to "hang up" - the beeping continues!
> > > > 
> > > > I have just upgraded ekiga/opal/pwlib to
the latest versions and get the same
> > > > kind of thing. I call 500ekiga.net, get two beeps and then ekiga hangs.
Clicking hang-up
> > > > causes just that: a complete hang-up and
ekiga must be killed! With ekiga 2.0.1 at least
> > > > you connect to the echo test.
> > > > 
> > > 
> > > Wouldn't you be using ALSA 1.0.11 which
would have been upgraded with
> > > Ekiga?
> > 
> > No, my ALSA is from the CVS  last week as per
previous recommendations. 
> > 
> 
> Then probably CVS is broken again for ALSA...
> 
> Could you please provide more debug information so that
we can confirm
> it or not? (backtrace, debug 4 output, ...)

Ok. I start ekiga, select  500ekiga.net from the
drop-down, click connect after
which nothing happens. No beeps today. The back-trace shows
no trace of ALSA.

HTH
-Robin.


(gdb) r
Starting program: /usr/bin/ekiga -d 4
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread 16384 (LWP 29408)]
[New Thread 32769 (LWP 29411)]
[New Thread 16386 (LWP 29412)]
[New Thread 32771 (LWP 29413)]
2006/06/08 21:13:27.772   0:02.417                       
ekiga Detected audio plugins: ALSA
2006/06/08 21:13:27.773   0:02.418                       
ekiga Detected video plugins: Picture,V4L,1394DC,1394AVC
2006/06/08 21:13:27.773   0:02.418                       
ekiga Detected audio plugins: ALSA
2006/06/08 21:13:27.774   0:02.419                       
ekiga Detected video plugins: Picture,V4L,1394DC,1394AVC
Block 0xa7907bd0 not in heap!
Block 0xa7907bd0 not in heap!
Block 0xa7907bd0 not in heap!
Block 0xa7907bd0 not in heap!
Block 0xa790ca60 not in heap!
Block 0xa790ca60 not in heap!
Block 0xa790ca60 not in heap!
Block 0xa790ca60 not in heap!
2006/06/08 21:13:29.504   0:04.149                       
ekiga Detected the following audio input devices:
CA0106,Default with plugin ALSA
2006/06/08 21:13:29.504   0:04.150                       
ekiga Detected the following audio output devices:
CA0106,Default with plugin ALSA
2006/06/08 21:13:29.505   0:04.150                       
ekiga Detected the following video input devices: Logitech
QuickCam Communicate S with plugin V4L
2006/06/08 21:13:29.506   0:04.151                       
ekiga Detected the following audio input devices:
CA0106,Default with plugin ALSA
2006/06/08 21:13:29.506   0:04.151                       
ekiga Detected the following audio output devices:
CA0106,Default with plugin ALSA
2006/06/08 21:13:29.507   0:04.152                       
ekiga Detected the following video input devices: Logitech
QuickCam Communicate S with plugin V4L
2006/06/08 21:13:31.030   0:05.675                       
ekiga Couldn't connect to session bus : Unable to determine
the address of the message bus
2006/06/08 21:13:31.042   0:05.687                       
ekiga Ekiga version 2.0.2
2006/06/08 21:13:31.042   0:05.688                       
ekiga OPAL version unknown
2006/06/08 21:13:31.043   0:05.688                       
ekiga PWLIB version 1.10.1
2006/06/08 21:13:31.043   0:05.688                       
ekiga GNOME support disabled
2006/06/08 21:13:31.044   0:05.689                       
ekiga Fullscreen support enabled
2006/06/08 21:13:31.045   0:05.690                       
ekiga DBUS support enabled
2006/06/08 21:13:31.048   0:05.694                       
ekiga Set TCP port range to 30000:30010
2006/06/08 21:13:31.049   0:05.694                       
ekiga Set RTP port range to 5000:5059
2006/06/08 21:13:31.049   0:05.694                       
ekiga Set UDP port range to 5060:5100
Block 0x85dd140 not in heap!
Block 0x85dd140 not in heap!
Block 0x85dd140 not in heap!
Block 0x85dd140 not in heap!
Block 0x85dc0e0 not in heap!
Block 0x85dc0e0 not in heap!
Block 0x85dc0e0 not in heap!
Block 0x85dc0e0 not in heap!
[New Thread 49156 (LWP 29418)]
[New Thread 65541 (LWP 29419)]
[New Thread 81926 (LWP 29420)]
[New Thread 98311 (LWP 29421)]
[Thread 98311 (LWP 29421) exited]
[New Thread 114695 (LWP 29433)]
[New Thread 131080 (LWP 29434)]
[Thread 81926 (LWP 29420) exited]

(ekiga:29408): Gdk-WARNING **: gdk_window_set_back_pixmap():
pixmap must have a colormap

(ekiga:29408): Gdk-WARNING **: gdk_window_set_back_pixmap():
pixmap must have a colormap

(ekiga:29408): Gdk-WARNING **: gdk_window_set_back_pixmap():
pixmap must have a colormap
[New Thread 147462 (LWP 29451)]
Block 0xa798b178 not in heap!
Block 0xa798b178 not in heap!
Block 0xa798b178 not in heap!
Block 0xa798b178 not in heap!
Block 0xa6700958 not in heap!
Block 0xa6700958 not in heap!
Block 0xa6700958 not in heap!
Block 0xa6700958 not in heap!
[New Thread 163849 (LWP 29454)]
[Thread 147462 (LWP 29451) exited]
[New Thread 180230 (LWP 29459)]

Program received signal SIGINT, Interrupt.
[Switching to Thread 114695 (LWP 29433)]
0x44c591e1 in select () from /lib/libc.so.6
(gdb) thread apply all bt

Thread 13 (Thread 180230 (LWP 29459)):
#0  0x44dcbb18 in __pthread_sigsuspend () from
/lib/libpthread.so.0
#1  0x44dcb979 in __pthread_wait_for_restart_signal ()
   from /lib/libpthread.so.0
#2  0x44dccdae in __pthread_lock () from
/lib/libpthread.so.0
#3  0x44dc9e78 in pthread_mutex_lock () from
/lib/libpthread.so.0
#4  0xa7eb6312 in PTimedMutex::Wait ()
   from /usr/lib/libpt_linux_x86_r.so.1.10.1
#5  0xa7ec8536 in PTimer::Stop () from
/usr/lib/libpt_linux_x86_r.so.1.10.1
#6  0x426a5496 in SIPTransaction::OnReceivedResponse ()
   from /usr/lib/libopal_linux_x86_n.so.2.2
#7  0x426a7fee in SIPInvite::OnReceivedResponse ()
   from /usr/lib/libopal_linux_x86_n.so.2.2
#8  0x426621a2 in SIPConnection::OnReceivedPDU ()
   from /usr/lib/libopal_linux_x86_n.so.2.2
#9  0x42677a2c in SIPConnection::HandlePDUsThreadMain ()
   from /usr/lib/libopal_linux_x86_n.so.2.2
#10 0x4267d5a0 in
SIPConnection::HandlePDUsThreadMain_PNotifier::Call ()
   from /usr/lib/libopal_linux_x86_n.so.2.2
#11 0x080a34be in PNotifier::operator() ()
#12 0xa7ecd392 in PSimpleThread::Main ()
   from /usr/lib/libpt_linux_x86_r.so.1.10.1
#13 0xa7eb505b in PThread::PX_ThreadStart ()
   from /usr/lib/libpt_linux_x86_r.so.1.10.1
#14 0x44dc8f2a in pthread_start_thread () from
/lib/libpthread.so.0
#15 0x44dc90c9 in pthread_start_thread_event () from
/lib/libpthread.so.0
#16 0x44c5f50a in clone () from /lib/libc.so.6

Thread 12 (Thread 163849 (LWP 29454)):
#0  0x44dcbb18 in __pthread_sigsuspend () from
/lib/libpthread.so.0
#1  0x44dcb979 in __pthread_wait_for_restart_signal ()
---Type <return> to continue, or q <return> to
quit---
   from /lib/libpthread.so.0
#2  0x44dcc770 in sem_waitGLIBC_2.1 () from
/lib/libpthread.so.0
#3  0x44dcce21 in __pthread_unlock () from
/lib/libpthread.so.0
Previous frame inner to this frame (corrupt stack?)

Thread 10 (Thread 131080 (LWP 29434)):
#0  0x44c591e1 in select () from /lib/libc.so.6
#1  0xa7ef9214 in ?? () from
/usr/lib/libpt_linux_x86_r.so.1.10.1
#2  0xa68b76e0 in ?? ()
#3  0x00000022 in ?? ()
#4  0x00000000 in ?? ()

Thread 9 (Thread 114695 (LWP 29433)):
#0  0x44c591e1 in select () from /lib/libc.so.6
#1  0xa7ef9214 in ?? () from
/usr/lib/libpt_linux_x86_r.so.1.10.1
#2  0xa69586e0 in ?? ()
#3  0x0000001f in ?? ()
#4  0x00000000 in ?? ()

Thread 6 (Thread 65541 (LWP 29419)):
#0  0x44c591e1 in select () from /lib/libc.so.6
#1  0xa7ef9214 in ?? () from
/usr/lib/libpt_linux_x86_r.so.1.10.1
#2  0x00000017 in ?? ()
#3  0x00000019 in ?? ()
#4  0x00000000 in ?? ()

Thread 5 (Thread 49156 (LWP 29418)):
#0  0x44c591e1 in select () from /lib/libc.so.6
#1  0xa7ef9214 in ?? () from
/usr/lib/libpt_linux_x86_r.so.1.10.1
#2  0xa6a41bc0 in ?? ()
#3  0x00000013 in ?? ()
#4  0x00000000 in ?? ()

---Type <return> to continue, or q <return> to
quit---
Thread 4 (Thread 32771 (LWP 29413)):
#0  0x44dcbb18 in __pthread_sigsuspend () from
/lib/libpthread.so.0
#1  0x44dcb979 in __pthread_wait_for_restart_signal ()
   from /lib/libpthread.so.0
#2  0x44dccdae in __pthread_lock () from
/lib/libpthread.so.0
#3  0x44dc9f61 in pthread_mutex_timedlock () from
/lib/libpthread.so.0
#4  0xa7eb63f7 in PTimedMutex::Wait ()
   from /usr/lib/libpt_linux_x86_r.so.1.10.1
#5  0x426a56f6 in SIPTransaction::OnRetry ()
   from /usr/lib/libopal_linux_x86_n.so.2.2
#6  0x426d313b in SIPTransaction::OnRetry_PNotifier::Call ()
   from /usr/lib/libopal_linux_x86_n.so.2.2
#7  0x080a34be in PNotifier::operator() ()
#8  0xa7ec8679 in PTimer::OnTimeout ()
   from /usr/lib/libpt_linux_x86_r.so.1.10.1
#9  0xa7ec8759 in PTimer::Process ()
   from /usr/lib/libpt_linux_x86_r.so.1.10.1
#10 0xa7ec89e0 in PTimerList::Process ()
   from /usr/lib/libpt_linux_x86_r.so.1.10.1
#11 0xa7eb2fe8 in PHouseKeepingThread::Main ()
   from /usr/lib/libpt_linux_x86_r.so.1.10.1
#12 0xa7eb505b in PThread::PX_ThreadStart ()
   from /usr/lib/libpt_linux_x86_r.so.1.10.1
#13 0x44dc8f2a in pthread_start_thread () from
/lib/libpthread.so.0
#14 0x44dc90c9 in pthread_start_thread_event () from
/lib/libpthread.so.0
#15 0x44c5f50a in clone () from /lib/libc.so.6

Thread 3 (Thread 16386 (LWP 29412)):
#0  0x44dcf0e6 in nanosleep () from /lib/libpthread.so.0
#1  0x00000000 in ?? ()

Thread 2 (Thread 32769 (LWP 29411)):
---Type <return> to continue, or q <return> to
quit---
#0  0x44c5715a in poll () from /lib/libc.so.6
#1  0x44dc8a37 in __pthread_manager () from
/lib/libpthread.so.0
#2  0x44dc8d2e in __pthread_manager_event () from
/lib/libpthread.so.0
#3  0x44c5f50a in clone () from /lib/libc.so.6

Thread 1 (Thread 16384 (LWP 29408)):
#0  0x44c5715a in poll () from /lib/libc.so.6
#1  0x4e43c415 in g_main_loop_get_context () from
/usr/lib/libglib-2.0.so.0
#2  0x08626c78 in ?? ()
#3  0x00000002 in ?? ()
#4  0x00005fd7 in ?? ()
#5  0x4e43b3bd in g_main_context_query () from
/usr/lib/libglib-2.0.so.0
#6  0x00000002 in ?? ()
#7  0x00000002 in ?? ()
#8  0x08626c78 in ?? ()
#9  0x4e43ba72 in g_main_context_dispatch () from
/usr/lib/libglib-2.0.so.0
#10 0x0814bb38 in ?? ()
#11 0x00005fd7 in ?? ()
#12 0x7fffffff in ?? ()
#13 0x08626c78 in ?? ()
#14 0x00000002 in ?? ()
#15 0xafb46894 in ?? ()
#16 0x4e498560 in g_thread_use_default_impl ()
   from /usr/lib/libglib-2.0.so.0
#17 0x4e49854c in glib_mem_profiler_table () from
/usr/lib/libglib-2.0.so.0
#18 0x4e4987e8 in g_mem_gc_friendly () from
/usr/lib/libglib-2.0.so.0
#19 0x00005fd7 in ?? ()
#20 0x7fffffff in ?? ()
#21 0x4e4981b8 in ?? () from /usr/lib/libglib-2.0.so.0
#22 0x08631fa0 in ?? ()
#23 0x00000001 in ?? ()
#24 0x00000000 in ?? ()
---Type <return> to continue, or q <return> to
quit---
#0  0x44c591e1 in select () from /lib/libc.so.6
(gdb)                                                       
    
-- 
------------------------------------------------------------
----------
Robin Atwood.

"Ship me somewheres east of Suez, where the best is
like the worst,
 Where there ain't no Ten Commandments an' a man can raise
a thirst"
         from "Mandalay" by Rudyard Kipling
------------------------------------------------------------
----------








_______________________________________________
GnomeMeeting-list mailing list
GnomeMeeting-listgnome.org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list



  


  

    
  

  
  
   
     
    

  

    Ekiga test call - "beeeep!"
  


  

     user name

     2006-06-08 14:23:31
  


  

    
Le jeudi 08 juin 2006 à 21:20 +0700, Robin Atwood a écrit :
> On Thursday 08 June 2006 15:11, Damien Sandras wrote:
> > Le jeudi 08 juin 2006 à 04:40 +0700, Robin Atwood
a écrit :
> > > On Thursday 08 June 2006 01:47, Damien
Sandras wrote:
> > > > Le mercredi 07 juin 2006 à 22:25 +0700,
Robin Atwood a écrit :
> > > > > On Wednesday 07 June 2006 22:12,
Andrew Burns wrote:
> > > > > > I've recently been trying to
run the test call (sip:500ekiga.net) to check that my
configuration works.
> > > > > > However when I try to do so,
all I receive is one beep every four or so seconds.  It is
often impossible to "hang up" - the beeping
continues!
> > > > > 
> > > > > I have just upgraded
ekiga/opal/pwlib to the latest versions and get the same
> > > > > kind of thing. I call 500ekiga.net, get two beeps and then ekiga hangs.
Clicking hang-up
> > > > > causes just that: a complete
hang-up and ekiga must be killed! With ekiga 2.0.1 at least
> > > > > you connect to the echo test.
> > > > > 
> > > > 
> > > > Wouldn't you be using ALSA 1.0.11 which
would have been upgraded with
> > > > Ekiga?
> > > 
> > > No, my ALSA is from the CVS  last week as per
previous recommendations. 
> > > 
> > 
> > Then probably CVS is broken again for ALSA...
> > 
> > Could you please provide more debug information so
that we can confirm
> > it or not? (backtrace, debug 4 output, ...)
> 
> Ok. I start ekiga, select  500ekiga.net from the
drop-down, click connect after
> which nothing happens. No beeps today. The back-trace
shows no trace of ALSA.
> 
> HTH
> -Robin.

What means "nothing happens"?

Can you mail a debug 4 output? (ekiga -d 4).    
-- 
 _      Damien Sandras
(o-     
//\     Ekiga Softphone: http://www.ekiga.org/
v_/_    FOSDEM 2006    : http://www.fosdem.org/
        SIP Phone      : sip:dsandrasekiga.net
                         sip:600000ekiga.net

_______________________________________________
GnomeMeeting-list mailing list
GnomeMeeting-listgnome.org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list



  


  

    
  

  
  
   
     
    

  

    Ekiga test call - "beeeep!"
  


  

     user name

     2006-06-08 14:25:02
  


  

    
Le jeudi 08 juin 2006 à 21:20 +0700, Robin Atwood a écrit :
> On Thursday 08 June 2006 15:11, Damien Sandras wrote:
> > Le jeudi 08 juin 2006 à 04:40 +0700, Robin Atwood
a écrit :
> > > On Thursday 08 June 2006 01:47, Damien
Sandras wrote:
> > > > Le mercredi 07 juin 2006 à 22:25 +0700,
Robin Atwood a écrit :
> > > > > On Wednesday 07 June 2006 22:12,
Andrew Burns wrote:
> > > > > > I've recently been trying to
run the test call (sip:500ekiga.net) to check that my
configuration works.
> > > > > > However when I try to do so,
all I receive is one beep every four or so seconds.  It is
often impossible to "hang up" - the beeping
continues!
> > > > > 
> > > > > I have just upgraded
ekiga/opal/pwlib to the latest versions and get the same
> > > > > kind of thing. I call 500ekiga.net, get two beeps and then ekiga hangs.
Clicking hang-up
> > > > > causes just that: a complete
hang-up and ekiga must be killed! With ekiga 2.0.1 at least
> > > > > you connect to the echo test.
> > > > > 
> > > > 
> > > > Wouldn't you be using ALSA 1.0.11 which
would have been upgraded with
> > > > Ekiga?
> > > 
> > > No, my ALSA is from the CVS  last week as per
previous recommendations. 
> > > 
> > 
> > Then probably CVS is broken again for ALSA...
> > 
> > Could you please provide more debug information so
that we can confirm
> > it or not? (backtrace, debug 4 output, ...)
> 
> Ok. I start ekiga, select  500ekiga.net from the
drop-down, click connect after
> which nothing happens. No beeps today. The back-trace
shows no trace of ALSA.
> 

Ah yes, it is gentoo. So no debug 4 output. I'll see with
the Gentoo
maintainer if he can fix the default build.        
-- 
 _      Damien Sandras
(o-     
//\     Ekiga Softphone: http://www.ekiga.org/
v_/_    FOSDEM 2006    : http://www.fosdem.org/
        SIP Phone      : sip:dsandrasekiga.net
                         sip:600000ekiga.net

_______________________________________________
GnomeMeeting-list mailing list
GnomeMeeting-listgnome.org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list



  


  

    
  

  
  
   
     
    

  

    Ekiga test call - "beeeep!"
  


  

     user name

     2006-06-09 06:11:08
  


  

    
On Thursday 08 June 2006 21:25, Damien Sandras wrote:

> Ah yes, it is gentoo. So no debug 4 output. I'll see
with the Gentoo
> maintainer if he can fix the default build.        

I just unpacked the source and had a look at the configure
options but see nothing
to do with debug. How do you configure it?

-Robin.
-- 
------------------------------------------------------------
----------
Robin Atwood.

"Ship me somewheres east of Suez, where the best is
like the worst,
 Where there ain't no Ten Commandments an' a man can raise
a thirst"
         from "Mandalay" by Rudyard Kipling
------------------------------------------------------------
----------








_______________________________________________
GnomeMeeting-list mailing list
GnomeMeeting-listgnome.org
http://mail.gnome.org/mailman/listinfo/gnomemeeting-list



  


  

    
  

  
  
   
     
    






 [1-10] [11-13]











   
 





about | contact  Other archives ( Real Estate discussion Medical topics )