EFW 2.1 SMP machines

Thread: EFW 2.1 SMP machines

Search this list only Search all lists
EFW 2.1 SMP machines
	2007-01-04 09:43:21
Peter as i said the SMP machines don't boot after the fatal error's that i said before here is the last lines when the machine is trying to boot after instalation .... Mounting root filesystem mount: Error 6 mounting EXT3 mount: Error 3 mounting NONE Switching to new root Switchroot: mount failed: 22 umount /initrd/dev: 2 Kernel Panic - no syncing: Attempted to kill init! <0> Rebooting in 10 seconds.. hope this help.... ------------------------------------------------------------ ------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default. php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Efw-user mailing list Efw-userlists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user

Re: EFW 2.1 SMP machines
	2007-04-13 06:18:31
We have exactly the same problem with EFW 2.1 and a new HP DX5150 PC. This has a MSI 09AC motherboard, AMD Sempron 2100+ CPU, 512MB RAM and a IXP SB400 SATA Controller (with SATA hard disk). The installation appeared to be successful, however on the reboot after completing the initial installation from CD the last lines were excatly the same and the Endian Firewall failed to boot. We then successfully installed using EFW 2.0 without any problems. Any help would be appreciated. Danger wrote: > > Peter as i said the SMP machines don't boot after the fatal error's that > i said before here is the last lines when the machine is trying to boot > after instalation > > .... > Mounting root filesystem > mount: Error 6 mounting EXT3 > mount: Error 3 mounting NONE > Switching to new root > Switchroot: mount failed: 22 > umount /initrd/dev: 2 > Kernel Panic - no syncing: Attempted to kill init! > <0> Rebooting in 10 seconds.. > > > > > hope this help.... > > ------------------------------------------------------------ ------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default. php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > Efw-user mailing list > Efw-userlists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/efw-user > > -- View this message in context: http://www.nabble.com/-Efw-user--EF W-2.1-SMP-machines-tf2918566.html#a9977078 Sent from the efw-user mailing list archive at Nabble.com. ------------------------------------------------------------ ------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default. php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Efw-user mailing list Efw-userlists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user

Re: EFW 2.1 SMP machines
	2007-04-13 15:06:57
On Intel based machines, P4 or so, turn off hyperthreading (if your machine is a single processor), it should allow your machine to boot up. Had this problem on a supermicro machine, it worked in this case. Not a fix, just a work a round... Howard Giraffe wrote: > We have exactly the same problem with EFW 2.1 and a new HP DX5150 PC. This > has a MSI 09AC motherboard, AMD Sempron 2100+ CPU, 512MB RAM and a IXP SB400 > SATA Controller (with SATA hard disk). > > The installation appeared to be successful, however on the reboot after > completing the initial installation from CD the last lines were excatly the > same and the Endian Firewall failed to boot. > > We then successfully installed using EFW 2.0 without any problems. > > Any help would be appreciated. > > > Danger wrote: >> Peter as i said the SMP machines don't boot after the fatal error's that >> i said before here is the last lines when the machine is trying to boot >> after instalation >> >> .... >> Mounting root filesystem >> mount: Error 6 mounting EXT3 >> mount: Error 3 mounting NONE >> Switching to new root >> Switchroot: mount failed: 22 >> umount /initrd/dev: 2 >> Kernel Panic - no syncing: Attempted to kill init! >> <0> Rebooting in 10 seconds.. >> >> >> >> >> hope this help.... >> >> ------------------------------------------------------------ ------------- >> Take Surveys. Earn Cash. Influence the Future of IT >> Join SourceForge.net's Techsay panel and you'll get the chance to share >> your >> opinions on IT & business topics through brief surveys - and earn cash >> http://www.techsay.com/default. php?page=join.php&p=sourceforge&CID=DEVDEV >> _______________________________________________ >> Efw-user mailing list >> Efw-userlists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/efw-user >> >> > ------------------------------------------------------------ ------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default. php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Efw-user mailing list Efw-userlists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user

Re: EFW 2.1 SMP machines
	2007-04-16 06:49:33
Unfortunately this does not help in our case as the CPU is an AMD Sempron. Howard Fleming wrote: > > On Intel based machines, P4 or so, turn off hyperthreading (if your > machine is a > single processor), it should allow your machine to boot up. Had this > problem on > a supermicro machine, it worked in this case. > > Not a fix, just a work a round... > > Howard > > > Giraffe wrote: >> We have exactly the same problem with EFW 2.1 and a new HP DX5150 PC. >> This >> has a MSI 09AC motherboard, AMD Sempron 2100+ CPU, 512MB RAM and a IXP >> SB400 >> SATA Controller (with SATA hard disk). >> >> The installation appeared to be successful, however on the reboot after >> completing the initial installation from CD the last lines were excatly >> the >> same and the Endian Firewall failed to boot. >> >> We then successfully installed using EFW 2.0 without any problems. >> >> Any help would be appreciated. >> >> >> Danger wrote: >>> Peter as i said the SMP machines don't boot after the fatal error's that >>> i said before here is the last lines when the machine is trying to boot >>> after instalation >>> >>> .... >>> Mounting root filesystem >>> mount: Error 6 mounting EXT3 >>> mount: Error 3 mounting NONE >>> Switching to new root >>> Switchroot: mount failed: 22 >>> umount /initrd/dev: 2 >>> Kernel Panic - no syncing: Attempted to kill init! >>> <0> Rebooting in 10 seconds.. >>> >>> >>> >>> >>> hope this help.... >>> > >>> _______________________________________________ >>> Efw-user mailing list >>> Efw-userlists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/efw-user >>> >>> >> > > > > -- View this message in context: http://www.nabble.com/-Efw-user--E FW-2.1-SMP-machines-tf2918566.html#a10014657 Sent from the efw-user mailing list archive at Nabble.com. ------------------------------------------------------------ ------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourcefor ge.net/powerbar/db2/ _______________________________________________ Efw-user mailing list Efw-userlists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/efw-user

[1-4]

about | contact Other archives ( Real Estate discussion Medical topics )