Bugs item #1521238, was opened at 2006-07-12 17:32
Message generated for change (Comment added) made by
kyiannis
You can respond by visiting:
https://sourcefo
rge.net/tracker/?func=detail&atid=725139&aid=1521238
&group_id=132104
Please note that this message will contain a full copy of
the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: Installer
Group: None
Status: Open
Resolution: None
Priority: 5
Submitted By: Nobody/Anonymous (nobody)
Assigned to: Nobody/Anonymous (nobody)
Summary: 2.0 ISO won't boot
Initial Comment:
At first I thought it was because of another Grub
installation on the hard drive, but after wiping the
drive clean the problem persists.
The iso just boots to a grub> prompt with no
instructions on how to proceed. I'm trying different
commands at the prompt, but to no avail.
Gene Haberman
ghaberma gallonlaw.com
------------------------------------------------------------
----------
Comment By: kyiannis (kyiannis)
Date: 2006-08-24 16:04
Message:
Logged In: YES
user_id=1379156
One way to boot 2.0 ISO image is to use SMARTBOOTMANAGER
(sbminst.exe). Download from SourceForge Project.
Insert an empty disk(1.44MB) on the FD.
Run from command line the following :
sbminst.exe -t us -d 0
Boot from the FD with the CD that contains the Endian 2.0
iso loaded in the cd drive.
------------------------------------------------------------
----------
Comment By: David Kenyon (davidkenyon)
Date: 2006-07-18 08:22
Message:
Logged In: YES
user_id=1532354
Hi All!
I'm just new to Endian and am looking at an alternative to
SME Server. I have downloaded the ISO and verified it, but
it simply won't boot. I'm trying to boot it into a P4
1.5Ghz box. Boots on another P4 2.4Ghz. Any idea's?
Cheers,
David Kenyon
TRIPOS IT
------------------------------------------------------------
----------
Comment By: Code_Slave (code_slave)
Date: 2006-07-18 05:47
Message:
Logged In: YES
user_id=413743
sorry guys, it booted fine for me
just took the ISO image and burned it straight out to disk
no problems
------------------------------------------------------------
----------
Comment By: Tim (tim1962)
Date: 2006-07-18 05:00
Message:
Logged In: YES
user_id=1557284
Posted in the forum and copied here:
I would have to say there is something going on with the
EFW isolinux bootable files with this version on some
PC's. I burned the ISO to CD at work and upgraded my lab
firewall (Dell GX110) there without any problems. I
brought home the same CD to upgrade the firewall here and
it will not boot (Asus P2B PIII 350MHz). I also downloaded
the ISO again and burned two more CD's that didn't work
either. Like others I have booted the other endian FW cd's
as well IPCop previously without any problems.
In an attempt to get around the problem I pulled the known
good CD drive from the EFW at work and put it in the ASUS
P2B system and I still have the boot failure here at home.
Workaround: Boot with 1.1rc6 and replace 1.1rc6 CD with
2.0 CD once at boot prompt.
------------------------------------------------------------
----------
Comment By: osvpaez (osvpaez)
Date: 2006-07-15 22:32
Message:
Logged In: YES
user_id=1554670
Dear friend
In the : http:
//www.wolfgang-brinkmann.de/bcdw/index.htm
download this bcdw150z_peb_en.zip
unzip and then dd if=bcdl150z.ima of=/dev/fd0
And boot floppy disk, work fine
Best regards
Osvaldo Paez
Argentina
------------------------------------------------------------
----------
Comment By: osvpaez (osvpaez)
Date: 2006-07-15 22:29
Message:
Logged In: YES
user_id=1554670
Dear friend
In the : http:
//www.wolfgang-brinkmann.de/bcdw/index.htm
download this bcdw150z_peb_en.zip
unzip and then dd if=bcdl150z.ima of=/dev/fd0
And boot floppy disk, work fine
Best regards
Osvaldo Paez
Argentina
------------------------------------------------------------
----------
Comment By: osvpaez (osvpaez)
Date: 2006-07-15 22:26
Message:
Logged In: YES
user_id=1554670
Dear friend
In the : http:
//www.wolfgang-brinkmann.de/bcdw/index.htm
download this bcdw150z_peb_en.zip
unzip and then dd if=bcdl150z.ima of=/dev/fd0
And boot floppy disk, work fine
Best regards
Osvaldo Paez
Argentina
------------------------------------------------------------
----------
Comment By: Nobody/Anonymous (nobody)
Date: 2006-07-15 14:00
Message:
Logged In: NO
doesent boot on my p3 eather, tried different cd drives and
even burned it on 3 diff cd´s, however it worked fine
booting up on a P4 so i installed on p3 and then moved
drive over to p3. But there is defenatly something wierd
with that image
/F
------------------------------------------------------------
----------
Comment By: Nobody/Anonymous (nobody)
Date: 2006-07-15 13:47
Message:
Logged In: NO
I can't get the cd to boot either, tried everything, works
in other computers, but not my firewall box, darn it.
------------------------------------------------------------
----------
Comment By: Nobody/Anonymous (nobody)
Date: 2006-07-15 11:10
Message:
Logged In: NO
same probleme here....
------------------------------------------------------------
----------
Comment By: Duno (theduno)
Date: 2006-07-15 07:37
Message:
Logged In: YES
user_id=1473874
Same problem here, cannot install over the top of my rc8
machine. Have tried the 2.0 CD in my DELL notebook and it
did boot sucessfully (although I cancelled it before my hdd
was wiped), so nothing wrong with the CD.....not sure what
this could be?
------------------------------------------------------------
----------
Comment By: Nobody/Anonymous (nobody)
Date: 2006-07-15 00:21
Message:
Logged In: NO
Problem is confirmed, downloaded and burned twice, reburned
at different speeds, finalized and non, problem still
exists. Tried two different computers, different CD and
DVD drives, etc. All hardware problems have been
eliminated and MD5 checksum on both download check out.
Burned with Nero 7, will try another burning program and
respond.
Tony
------------------------------------------------------------
----------
Comment By: Nobody/Anonymous (nobody)
Date: 2006-07-12 20:46
Message:
Logged In: NO
I think the disc is just not booting for whatever reason.
I just noticed the grub> prompt came up even when the
disc
was not in the cd drive. I'm able to boot several other
distro cds, so it appears to be some thing with the iso.
I've burned 2 copies from 2 separate downloads with the
same result. Please let me know if you find a problem and
manage to correct it. Thanks...
------------------------------------------------------------
----------
You can respond by visiting:
https://sourcefo
rge.net/tracker/?func=detail&atid=725139&aid=1521238
&group_id=132104
------------------------------------------------------------
-------------
Using Tomcat but need to do more? Need to support web
services, security?
Get stuff done quickly with pre-integrated technology to
make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on
Apache Geronimo
http://sel.as-us.falkag.net/
sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Efw-devel mailing list
Efw-devellists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/efw-devel
|