Installing fink on Leopard

Hello,
I want to to install fink on Mac OS 10.5.1 but I don't find
real  
instructions for that.

Requirements: Development tools. On Mac OS X, install the  
Developer.pkg package from the Developer Tools CD. On
Darwin, the  
tools should be present in the default install.

I don't find that Developers.pkg. I have an XcodeTools.mpkg.
Is that  
the right one?

Somewhere I've read that one needs to perform a source
install for  
Leopard, since there are no binary packages yet. Correct?

Thanks,

Florian

------------------------------------------------------------
-------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216
239;13503038;w?http://sf.net/marketplace
_______________________________________________
Fink-beginners mailing list
Fink-beginnerslists.sourceforge.net
h
ttp://news.gmane.org/gmane.os.apple.fink.beginners

Florian Lindner wrote:
> Hello,
> I want to to install fink on Mac OS 10.5.1 but I don't
find real  
> instructions for that.
>
> Requirements: Development tools. On Mac OS X, install
the  
> Developer.pkg package from the Developer Tools CD. On
Darwin, the  
> tools should be present in the default install.
>
> I don't find that Developers.pkg. I have an
XcodeTools.mpkg. Is that  
> the right one?
>
> Somewhere I've read that one needs to perform a source
install for  
> Leopard, since there are no binary packages yet.
Correct?
>
> Thanks,
>
> Florian
>   
Yes, install Xcode.  I'm not sure where the instructions
that you're
quoting are from, but they seemingly date from before 10.3 .
 And, yes,
you must install from source.

------------------------------------------------------------
-------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216
239;13503038;w?http://sf.net/marketplace
_______________________________________________
Fink-beginners mailing list
Fink-beginnerslists.sourceforge.net
h
ttp://news.gmane.org/gmane.os.apple.fink.beginners

Am 14.01.2008 um 14:50 schrieb Alexander Hansen:

> Florian Lindner wrote:
>> Hello,
>> I want to to install fink on Mac OS 10.5.1 but I
don't find real
>> instructions for that.
>>
>> Requirements: Development tools. On Mac OS X,
install the
>> Developer.pkg package from the Developer Tools CD.
On Darwin, the
>> tools should be present in the default install.
>>
>> I don't find that Developers.pkg. I have an
XcodeTools.mpkg. Is that
>> the right one?
>>
>> Somewhere I've read that one needs to perform a
source install for
>> Leopard, since there are no binary packages yet.
Correct?
>>
>> Thanks,
>>
>> Florian
>>
> Yes, install Xcode.  I'm not sure where the
instructions that you're
> quoting are from, but they seemingly date from before
10.3 .  And,  
> yes,
> you must install from source.

It's from http://www.finkproject.org/doc/bundled/install-first
.php#req

Ok, I tried to install it from source (0.27.3). Untarred it,
and  
started the bootstrap process which failed:

dpkg-deb -b root-debianutils-1.23-11
/sw/fink/10.5/stable/main/binary- 
darwin-i386/base
dpkg-deb: building package `debianutils' in
`/sw/fink/10.5/stable/main/ 
binary-darwin-i386/base/debianutils_1.23-11_darwin-i386.deb'
.
dpkg -i /sw/fink/dists/stable/main/binary-darwin-i386/base/

debianutils_1.23-11_darwin-i386.deb
Selecting previously deselected package debianutils.
(Reading database ... 30 files and directories currently
installed.)
Unpacking debianutils (from
.../debianutils_1.23-11_darwin-i386.deb) ...
Setting up debianutils (1.23-11) ...
/bin/cat /sw/src/fink-0.27.3.tar | /usr/bin/gnutar -xf -
make test PREFIX=/sw
perl -MExtUtils::Manifest=fullcheck -e 'my($missing, $extra)
=  
fullcheck;exit ($missing || $extra)'
Not in MANIFEST: images/finkDoneFailed.png.qKI
Not in MANIFEST: perlmod/ChangeLog.tws
Not in MANIFEST: perlmod/Fink/Base.pm.8r2
Not in MANIFEST: perlmod/Fink/Checksum/MD5.pm.hNv
Not in MANIFEST: perlmod/Fink/Finally/BuildConflicts.pm.tsI
Not in MANIFEST: perlmod/Fink/Notify/Growl.pm.c3o
Not in MANIFEST: perlmod/Fink/Text/DelimMatch.pm.3BO
Not in MANIFEST: t/00compile.t.xOs
Not in MANIFEST: t/10features/ChangeLog.4ty
Not in MANIFEST: t/Base/initialize.t.C8M
Not in MANIFEST: t/basepath/etc/fink.conf.6Bu
Not in MANIFEST: t/CLI/ChangeLog.jQT
Not in MANIFEST: t/Command/ChangeLog.fbd
Not in MANIFEST: t/Config/ChangeLog.oxG
Not in MANIFEST: t/Engine/ChangeLog.Dfn
Not in MANIFEST: t/Finally/ChangeLog.q7r
Not in MANIFEST: t/FinkVersion/exports.t.iHU
Not in MANIFEST: t/Mirror/exports.t.P2y
Not in MANIFEST: t/Notify/ChangeLog.g2V
Not in MANIFEST: t/Package/ChangeLog.y7B
Not in MANIFEST:
t/Package/duplicate_fullname_trees/epoch1/finkinfo/ 
duplicate-fullname.info.kuv
Not in MANIFEST:
t/Package/duplicate_fullname_trees/epoch1again/ 
finkinfo/duplicate-fullname.info.eWo
Not in MANIFEST:
t/Package/duplicate_fullname_trees/epoch2/finkinfo/ 
duplicate-fullname.info.2H4
Not in MANIFEST: t/PkgVersion/ChangeLog.9Le
Not in MANIFEST:
t/PkgVersion/get_splitoffs-tree/finkinfo/p1.info.LvX
Not in MANIFEST: t/Services/ChangeLog.I89
Not in MANIFEST: t/Text/DelimMatch.t.8GQ
Not in MANIFEST: update/ChangeLog.f2a
make: *** [manifest_check] Error 28
### execution of make failed, exit code 2
phase compiling: fink-0.27.3-31 failed


Any ideas?

Fink complains several times that my Mac OS version was not
released  
when this version of fink was released.

Another question: The INSTALL doc has a chapter: Getting X11
Sorted  
Out. Is it not possible to use the included X from Mac OS?

Thanks,

Florian
  

------------------------------------------------------------
-------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216
239;13503038;w?http://sf.net/marketplace
_______________________________________________
Fink-beginners mailing list
Fink-beginnerslists.sourceforge.net
h
ttp://news.gmane.org/gmane.os.apple.fink.beginners

Florian Lindner wrote:
>
> Am 14.01.2008 um 14:50 schrieb Alexander Hansen:
>
>> Florian Lindner wrote:
>>> Hello,
>>> I want to to install fink on Mac OS 10.5.1 but
I don't find real
>>> instructions for that.
>>>
>>> Requirements: Development tools. On Mac OS X,
install the
>>> Developer.pkg package from the Developer Tools
CD. On Darwin, the
>>> tools should be present in the default
install.
>>>
>>> I don't find that Developers.pkg. I have an
XcodeTools.mpkg. Is that
>>> the right one?
>>>
>>> Somewhere I've read that one needs to perform a
source install for
>>> Leopard, since there are no binary packages
yet. Correct?
>>>
>>> Thanks,
>>>
>>> Florian
>>>
>> Yes, install Xcode.  I'm not sure where the
instructions that you're
>> quoting are from, but they seemingly date from
before 10.3 .  And, yes,
>> you must install from source.
>
> It's from http://www.finkproject.org/doc/bundled/install-first
.php#req
>
> Ok, I tried to install it from source (0.27.3).
Untarred it, and
> started the bootstrap process which failed:
>
> dpkg-deb -b root-debianutils-1.23-11
> /sw/fink/10.5/stable/main/binary-darwin-i386/base
> dpkg-deb: building package `debianutils' in
>
`/sw/fink/10.5/stable/main/binary-darwin-i386/base/debianuti
ls_1.23-11_darwin-i386.deb'.
>
> dpkg -i
>
/sw/fink/dists/stable/main/binary-darwin-i386/base/debianuti
ls_1.23-11_darwin-i386.deb
>
> Selecting previously deselected package debianutils.
> (Reading database ... 30 files and directories
currently installed.)
> Unpacking debianutils (from
.../debianutils_1.23-11_darwin-i386.deb) ...
> Setting up debianutils (1.23-11) ...
> /bin/cat /sw/src/fink-0.27.3.tar | /usr/bin/gnutar -xf
-
> make test PREFIX=/sw
> perl -MExtUtils::Manifest=fullcheck -e 'my($missing,
$extra) =
> fullcheck;exit ($missing || $extra)'
> Not in MANIFEST: images/finkDoneFailed.png.qKI
> Not in MANIFEST: perlmod/ChangeLog.tws
> Not in MANIFEST: perlmod/Fink/Base.pm.8r2
> Not in MANIFEST: perlmod/Fink/Checksum/MD5.pm.hNv
> Not in MANIFEST:
perlmod/Fink/Finally/BuildConflicts.pm.tsI
> Not in MANIFEST: perlmod/Fink/Notify/Growl.pm.c3o
> Not in MANIFEST: perlmod/Fink/Text/DelimMatch.pm.3BO
> Not in MANIFEST: t/00compile.t.xOs
> Not in MANIFEST: t/10features/ChangeLog.4ty
> Not in MANIFEST: t/Base/initialize.t.C8M
> Not in MANIFEST: t/basepath/etc/fink.conf.6Bu
> Not in MANIFEST: t/CLI/ChangeLog.jQT
> Not in MANIFEST: t/Command/ChangeLog.fbd
> Not in MANIFEST: t/Config/ChangeLog.oxG
> Not in MANIFEST: t/Engine/ChangeLog.Dfn
> Not in MANIFEST: t/Finally/ChangeLog.q7r
> Not in MANIFEST: t/FinkVersion/exports.t.iHU
> Not in MANIFEST: t/Mirror/exports.t.P2y
> Not in MANIFEST: t/Notify/ChangeLog.g2V
> Not in MANIFEST: t/Package/ChangeLog.y7B
> Not in MANIFEST:
>
t/Package/duplicate_fullname_trees/epoch1/finkinfo/duplicate
-fullname.info.kuv
>
> Not in MANIFEST:
>
t/Package/duplicate_fullname_trees/epoch1again/finkinfo/dupl
icate-fullname.info.eWo
>
> Not in MANIFEST:
>
t/Package/duplicate_fullname_trees/epoch2/finkinfo/duplicate
-fullname.info.2H4
>
> Not in MANIFEST: t/PkgVersion/ChangeLog.9Le
> Not in MANIFEST:
t/PkgVersion/get_splitoffs-tree/finkinfo/p1.info.LvX
> Not in MANIFEST: t/Services/ChangeLog.I89
> Not in MANIFEST: t/Text/DelimMatch.t.8GQ
> Not in MANIFEST: update/ChangeLog.f2a
> make: *** [manifest_check] Error 28
> ### execution of make failed, exit code 2
> phase compiling: fink-0.27.3-31 failed
>
>
> Any ideas?
>
> Fink complains several times that my Mac OS version was
not released
> when this version of fink was released.
>
> Another question: The INSTALL doc has a chapter:
Getting X11 Sorted
> Out. Is it not possible to use the included X from Mac
OS?
>
> Thanks,
>
> Florian
>  
Why are you using 0.27.3?  You need 0.27.7 or later.  Check
out

http:
//www.finkproject.org/download/srcdist.php

The INSTALL doc is old.  You can, and must, use the included
X11 from
the OS on Leopard.

------------------------------------------------------------
-------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216
239;13503038;w?http://sf.net/marketplace
_______________________________________________
Fink-beginners mailing list
Fink-beginnerslists.sourceforge.net
h
ttp://news.gmane.org/gmane.os.apple.fink.beginners

Am 14.01.2008 um 17:21 schrieb Alexander Hansen:

> Florian Lindner wrote:
>>
>> Am 14.01.2008 um 14:50 schrieb Alexander Hansen:
>>
>>> Florian Lindner wrote:
>>>> Hello,
>>>> I want to to install fink on Mac OS 10.5.1
but I don't find real
>>>> instructions for that.
>>>>
>>>> Requirements: Development tools. On Mac OS
X, install the
>>>> Developer.pkg package from the Developer
Tools CD. On Darwin, the
>>>> tools should be present in the default
install.
>>>>
>>>> I don't find that Developers.pkg. I have an
XcodeTools.mpkg. Is  
>>>> that
>>>> the right one?
>>>>
>>>> Somewhere I've read that one needs to
perform a source install for
>>>> Leopard, since there are no binary packages
yet. Correct?
>>>>
>>>> Thanks,
>>>>
>>>> Florian
>>>>
>>> Yes, install Xcode.  I'm not sure where the
instructions that you're
>>> quoting are from, but they seemingly date from
before 10.3 .  And,  
>>> yes,
>>> you must install from source.
>>
>> It's from http:
//www.finkproject.org/doc/bundled/install- 
>> first.php#req
>>
>> Ok, I tried to install it from source (0.27.3).
Untarred it, and
>> started the bootstrap process which failed:
>>
>> dpkg-deb -b root-debianutils-1.23-11
>> /sw/fink/10.5/stable/main/binary-darwin-i386/base
>> dpkg-deb: building package `debianutils' in
>> `/sw/fink/10.5/stable/main/binary-darwin-i386/base/

>> debianutils_1.23-11_darwin-i386.deb'.
>>
>> dpkg -i
>> /sw/fink/dists/stable/main/binary-darwin-i386/base/

>> debianutils_1.23-11_darwin-i386.deb
>>
>> Selecting previously deselected package
debianutils.
>> (Reading database ... 30 files and directories
currently installed.)
>> Unpacking debianutils (from
.../debianutils_1.23-11_darwin- 
>> i386.deb) ...
>> Setting up debianutils (1.23-11) ...
>> /bin/cat /sw/src/fink-0.27.3.tar | /usr/bin/gnutar
-xf -
>> make test PREFIX=/sw
>> perl -MExtUtils::Manifest=fullcheck -e
'my($missing, $extra) =
>> fullcheck;exit ($missing || $extra)'
>> Not in MANIFEST: images/finkDoneFailed.png.qKI
>> Not in MANIFEST: perlmod/ChangeLog.tws
>> Not in MANIFEST: perlmod/Fink/Base.pm.8r2
>> Not in MANIFEST: perlmod/Fink/Checksum/MD5.pm.hNv
>> Not in MANIFEST:
perlmod/Fink/Finally/BuildConflicts.pm.tsI
>> Not in MANIFEST: perlmod/Fink/Notify/Growl.pm.c3o
>> Not in MANIFEST:
perlmod/Fink/Text/DelimMatch.pm.3BO
>> Not in MANIFEST: t/00compile.t.xOs
>> Not in MANIFEST: t/10features/ChangeLog.4ty
>> Not in MANIFEST: t/Base/initialize.t.C8M
>> Not in MANIFEST: t/basepath/etc/fink.conf.6Bu
>> Not in MANIFEST: t/CLI/ChangeLog.jQT
>> Not in MANIFEST: t/Command/ChangeLog.fbd
>> Not in MANIFEST: t/Config/ChangeLog.oxG
>> Not in MANIFEST: t/Engine/ChangeLog.Dfn
>> Not in MANIFEST: t/Finally/ChangeLog.q7r
>> Not in MANIFEST: t/FinkVersion/exports.t.iHU
>> Not in MANIFEST: t/Mirror/exports.t.P2y
>> Not in MANIFEST: t/Notify/ChangeLog.g2V
>> Not in MANIFEST: t/Package/ChangeLog.y7B
>> Not in MANIFEST:
>>
t/Package/duplicate_fullname_trees/epoch1/finkinfo/duplicate
- 
>> fullname.info.kuv
>>
>> Not in MANIFEST:
>>
t/Package/duplicate_fullname_trees/epoch1again/finkinfo/dupl
icate- 
>> fullname.info.eWo
>>
>> Not in MANIFEST:
>>
t/Package/duplicate_fullname_trees/epoch2/finkinfo/duplicate
- 
>> fullname.info.2H4
>>
>> Not in MANIFEST: t/PkgVersion/ChangeLog.9Le
>> Not in MANIFEST:
t/PkgVersion/get_splitoffs-tree/finkinfo/p1.info.LvX
>> Not in MANIFEST: t/Services/ChangeLog.I89
>> Not in MANIFEST: t/Text/DelimMatch.t.8GQ
>> Not in MANIFEST: update/ChangeLog.f2a
>> make: *** [manifest_check] Error 28
>> ### execution of make failed, exit code 2
>> phase compiling: fink-0.27.3-31 failed
>>
>>
>> Any ideas?
>>
>> Fink complains several times that my Mac OS version
was not released
>> when this version of fink was released.
>>
>> Another question: The INSTALL doc has a chapter:
Getting X11 Sorted
>> Out. Is it not possible to use the included X from
Mac OS?
>>
>> Thanks,
>>
>> Florian
>>
> Why are you using 0.27.3?  You need 0.27.7 or later. 
Check out
>
> http:
//www.finkproject.org/download/srcdist.php

The problem is that the german version of that page: http://www.finkproject.org/download/srcdist.php?phpLan
g=de 
  links to .27.3.
I've downloaded .27.8 now and it seems to work now (still
running)

Regards,

Florian

> The INSTALL doc is old.  You can, and must, use the
included X11 from
> the OS on Leopard.


------------------------------------------------------------
-------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216
239;13503038;w?http://sf.net/marketplace
_______________________________________________
Fink-beginners mailing list
Fink-beginnerslists.sourceforge.net
h
ttp://news.gmane.org/gmane.os.apple.fink.beginners

Florian Lindner wrote:
>
> The problem is that the german version of that page:
> http://www.finkproject.org/download/srcdist.php?phpLan
g=de links to
> .27.3.
> I've downloaded .27.8 now and it seems to work now
(still running)
>
> Regards,
>
> Florian
>
>> The INSTALL doc is old.  You can, and must, use the
included X11 from
>> the OS on Leopard.
>
Ah.  Makes sense.  I'll look at doing some link updates.

------------------------------------------------------------
-------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216
239;13503038;w?http://sf.net/marketplace
_______________________________________________
Fink-beginners mailing list
Fink-beginnerslists.sourceforge.net
h
ttp://news.gmane.org/gmane.os.apple.fink.beginners