RE: passw0rd issue - remotely accessing FOP via non-standard port

Thanks... I discovered that at the top of my op_server.cfg
file, was this
message (I am running version .23 - Jul 6 2005):
; NOTE
;
; In this config file, the following entries will be
IGNORED, in
; favour of the values set in /etc/amportal.conf (but do
not
; comment them !):
;   manager_user, manager_secret, web_hostname,
security_code, flash_dir

So that means I had to go to /etc/amportal.conf to change
the password from
passw0rd to something else. This is different to what was
specified in the
'asteriskhome' dumbme guide (ie it was no use trying to change
the password
in op_server.cfg). 

That was the problem!

Regards
MD
-----Original Message-----
From: Bernardo Vieira [mailto:bernardo.vieiraterra.com.br] 
Sent: Monday, 22 January 2007 11:06 PM
To: operator_panellists.house.com.ar
Subject: Re: [Flash Operator Panel] passw0rd issue -
remotely accessing FOP
via non-standard port

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

After changing any values in amportal.conf you must run
/usr/src/freepbx/apply_changes.sh to update all the
configuration files
used by freepbx. You don't have to reboot your server, if
anything just
doing a amportal restart should sufice.

Bernardo

Michael Daly wrote:
> Hello there
> I have changed the password from the default in:
> op_server.cfg 
> 
> But I notice there is an entry in /etc/amportal.conf:
> FOPPASSWORD=passw0rd
> 
> I have rebooted after the changes, to be sure
> 
> But FOP insists on use of the default password:
> passw0rd
> when I log in remotely via (e.g.):
> 123.456.78.78:99
> 
> Once I enter passw0rd, I seem to be able to do
everything you are supposed
> to do
> 
> ? what is happening. I am compused
> 
> Regards
> Michael
> Melbourne
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org


iD8DBQFFtKiS2QVs8jsa1mQRAmC+AJ9CPO4UYVjZxTjmLM01buTrainingGv
rigCgrcg2
rpYP63/Rf9DzmIlKM2oVSIU=
=u9dj
-----END PGP SIGNATURE-----


Flash Operator Panel Mailing List

To unsubscribe send an empty message to:
   <operator_panel-unsubscribelists.house.com.ar>
To get help send an empty message to:
   <operator_panel-helplists.house.com.ar>
The archives can be found at:
   http:/
/www.asternic.org/archives/maillist.html





Flash Operator Panel Mailing List

To unsubscribe send an empty message to:
   <operator_panel-unsubscribelists.house.com.ar>
To get help send an empty message to:
   <operator_panel-helplists.house.com.ar>
The archives can be found at:
   http:/
/www.asternic.org/archives/maillist.html