Can you please look at this - renaming Agents

Hi Nicolás,

No luck, it didn't work. Here is my settings. The full file
is below.

rename_label_agentlogin=0
rename_label_callbacklogin=0
rename_label_wildcard=0
rename_to_agent_name=0
agent_status=0

There is 1 queue with a static agent, no dynamic agents.
queues.conf:
member=Local/200from-internal,0


Regards
Mike



[general]
; host or ip address of asterisk
manager_host=127.0.0.1

; user and secret for connecting to * manager
manager_user=admin
manager_secret=amp111

; The optional event_mask for filtering manager events.
; Asterisk will send only the events you request
; with this parameter. Possible values are:
; on, off, system, call, log, verbose
;event_mask=call
;
; You can specify many asterisk servers to
; monitor. Just repeat the manager_host, manager_user
; and manager_secret parameters in order. The first
; one will be server number 1, and so on.
;
; manager_host=1.2.3.4
; manager_user=admin
; manager_secret=amp111

; Enable MD5 auth to Asterisk manager
auth_md5=1

; port to listen for inbound flash connections, default 4445
;listen_port=4445

; hostname or ip address used to connect to the webserver
where
; the flash movie resides (just the hostname, without
directories)
; This value might be omited. In that case the flash movie
will
; try to connect to the same host as the web page.
; web_hostname=localhost

; location of the .swf file in your disk (must reside
somewhere
; inside your web root)
flash_dir=/var/www/html/panel

; secret code for performing hangups and transfers
security_code=

; Frequency in second to poll for sip and iax status
poll_interval=120

; Poll for voicemail status (only necesary when you access
the
; voicemail directories outside asterisk itself - eg. web
access)
poll_voicemail=0

; 1 Enable automatic hangup of zombies
; 0 Disable
kill_zombies=0

; Debug level to stdout (bitmap)
; 1   Manager Events Received
; 2   Manager Commands Sent
; 4   Show Flash events Received
; 8   Show events sent to Flash Clients
; 16  Server 1st Debug Level
; 32  Server 2nd Debug Level
; 64  Server 3rd Debug Level
;
; Eg: to display manager events and
; commands sent set it to 3 (1+2)
;
; Maximum debug level 255
debug=0

; Default language to use (op_lang_XX.cfg file)
language=en

; Context in your diaplan where you have the conferences for
barge in
; Example:
;
; meetme.conf
; [rooms]
; conf => 900
; conf => 901
; conf => 902
;
; extensions.conf
; [conferences]
; exten => 900,1,MeetMe(900)
; exten => 901,1,MeetMe(901)
; exten => 902,1,MeetMe(902)
conference_context=conferences

; Meetme room numbers to use for barge in. The room number
must match
; the extension number (see above).
barge_rooms=900-902

; When doing barge ins, you can make the 3rd party to start
; the meetme muted, so the other parties wont notice they
are
; now being monitored
barge_muted=1

; Formatting of the callerid field
; where 'x' is a number
clid_format=(xx)xxxx-xxxx

; If you want not to show the callerid on the buttons, set
this
; to one
clid_privacy=0

; To display the ip address of sip or iax peer inside the
button
; set this to 1
show_ip=0

; Will change the button label on AgentLogin
rename_label_agentlogin=0

; Will change the button label on Agentcallbacklogin
rename_label_callbacklogin=0

; Will rename the label for a wildcard button
rename_label_wildcard=0

; Will rename to the name specified in agents.conf
; If disabled the renaming will be Agent/XXXX
rename_to_agent_name=0

; Will display IDLE time for agents, as well as
; update the queue status after an agent hangs up
; the call, so you don't need to reload to get
; queue statistics
agent_status=0

; Will rename labels for queuemembers
; If you use addqueuemember in your dialplan, you
; can fake an AgengLogin event by sending it with
; the UserEvent application. Eg:
;
; exten => 25,1,AddQueueMember(sales|SIP/$
; exten => 25,2,UserEvent(Agentlogin|Agent:
$);
; exten => 25,3,Answer
; exten => 25,4,Playback(added-to-sales-queue)
; exten => 25,5,Hangup
;
; exten =>
26,1,RemoveQueueMember(sales|SIP/$)
; exten => 26,2,UserEvent(RefreshQueue);
; exten => 26,3,Answer
; exten => 26,4,Playback(removed-from-sales-queue)
; exten => 26,5,Hangup
rename_queue_member=1

; Will change the led color when the agent logs in
; The color is configurable in op_style.cfg
change_led_agent=0

; If set to 1, you will transfer the linked channel instead
; of the current channel when you drag the icon on a button
reverse_transfer=0

; If enabled, it will not ask forthe  security code
; when performing a click to dial
clicktodial_insecure=1

; Enable select box with absolutetimeout for the call after
; a transfer is performed within the panel
;transfer_timeout= "0,No timeout|300,5 minutes|600,10
minutes|1200,20 
minutes|2400,40 minutes|3000,50 minutes"

; If set to 1, when hitting the reload button on the flash
; client it will instead restart the 1st asterisk box
; (For asterisk to restart you have to start it with
; safe_asterisk, if you dont do that, asterisk will just
; shut down)
enable_restart     = 0

; If you set this parameter to your voicemailmain
; extensioncontext, it will originate a call to
; voicemailmain when double clicking on the MWI icon
; for any button.
voicemail_extension = 3000features

; You can have panel contexts with their own
; button layout and configuration. The following entry
; will create a context called sip with a different
; security code. In the online documentation you will
; find how to use contexts
;
;[sip]
;security_code=passw0rd
;web_hostname=
;flash_dir=/var/www/html/panel
;barge_rooms=800-802
;conference_context=otherconferences
;transfer_timeout="0,No timeout|60,1 minute"
;voicemail_extension=1000nine
;language=es



----- Original Message ----- 
From: "Nicolás Gudiño" <nicolashouse.com.ar>
To: <operator_panellists.house.com.ar>
Sent: Monday, April 10, 2006 10:21 PM
Subject: Re: [Flash Operator Panel] Can you please look at
this - renaming 
Agents


> Hi,
>
> Edit op_server.cfg and look for any rename_* keyword in
there and set it 
> to zero. Then restart FOP and let me know if it fixes
your problem. 
> Regards,
>
>
> On Apr 9, 2006, at 10:09 PM, Mike Sander wrote:
>
>> Hi Nicolas, thankyou very much for the work you've
done so far.
>>
>> Can you please have a look at this issue -
particularly with FreePBX
>>
>> Thanks
>> Mike
>>
>> https://sourceforge.net/forum/message.php?msg_id=3677557

>>
>> I have a small installation with a single queue for
incoming calls - not 
>> a call center.
>>
>> AAH v2.8 is renaming all the extensions in FOP with
AGENT/SIP/210 etc 
>> when I set up the queue as a static agent. I don't
have logins or 
>> anything like that, so I don't want the buttons to
be renamed, just to 
>> show their original names like 210: Reception.
>>
>> Anyhelp is appreciated.
>>
>
>
>
> Flash Operator Panel Mailing List
>
> To unsubscribe send an empty message to:
>   <operator_panel-unsubscribelists.house.com.ar>
> To get help send an empty message to:
>   <operator_panel-helplists.house.com.ar>
> The archives can be found at:
>   http:/
/www.asternic.org/archives/maillist.html
>
>
> 



Flash Operator Panel Mailing List

To unsubscribe send an empty message to:
   <operator_panel-unsubscribelists.house.com.ar>
To get help send an empty message to:
   <operator_panel-helplists.house.com.ar>
The archives can be found at:
   http:/
/www.asternic.org/archives/maillist.html