> > >> Prior to updating to 6.1, my Intel 2200
BG worked fairly well using
> > >> iwi-firmware and wpa_supplicant. Now,
the firmware fails to load so I
> > >> cannot connect. I did some searching and
some people recommend
> > >> installing iwi-firmware-kmod. When I try
to do so, it is marked as
> > >> ignored and is uninstallable. Another
suggestion is to use code in
> > >> /usr/src/sys/dev/iwi but I don't see a
make file and I haven't a clue
> > >> on what to do with that code anyway.
> > >>
> > >> Does anyone know what I need to do to get
this nic working again?
> > >>
> > >> #uname -a
> > >> 6.1-STABLE FreeBSD 6.1-STABLE #1: Wed Jun
7 03:18:16 PDT 2006
> > >
> > > Can you be more precise about what goes
wrong?
> > > http://www.freebsd.org/doc/en_US
.ISO8859-1/articles/freebsd-questions/index.html
> > >
> > > I also suspect that you would have better
luck installing the ports if
> > > you updated your ports tree. But that's
just a guess.
> >
> > Are you using iwi-firmware from ports? there seems
to be a perfectly
> > working driver,
> >
> > # kldload if_iwi
> >
> > That's what people suggest you to compile from
sys/dev/iwi, but it's
> > also a loadable as kernel module. If it is not
installed in
> > /boot/kernel, then it will also be built with the
normal kernel build
> > proceedure.
> >
>
> Sorry for the lack of details. Sleep deprivation and
hardware
> troubleshooting shouldn't be mixed.
>
> Previously, I was using the iwi-firmware port rather
successfully,
> based on this webpage
>
>
http://damien.bergamini.free.fr/ipw/iwi-freebsd.html
>
> At the moment, I do have the device listed under
ifconfig iwi0 but I
> cannot associate with my AP. When I go to do a
"iwicontrol -i iwi0 -d
> /boot/firmware/if_iwi -m bss" I currently get an
error message in the
> /var/log/messages (sorry, can't access the machine to
get the message)
> but I think it was something about the device timing
out. Checking
> the help files for the error messages states the the
error message
> should not happen.
>
> When I did the searching, several posts mentioned that
iwi-firmware
> didn't work for them on 6.1 when it had on previous
versions. Later I
> can update my ports to see if iwi-firmware-kmod now has
the ignore
> setting removed, but according to
> http://www.freebsd.org/cgi/cvsweb.cgi/ports/ne
t/iwi-firmware-kmod/ the
> port hasn't been touched in about 2 months (unless I
am reading
> something wrong).
>
> To sorta summarize, these are example steps that I used
to take to get
> on wireless:
>
> iwicontrol -i iwi0 -d /boot/firmware/if_iwi -m bss
> ifconfig iwi0 up
> wpa_supplicant (args)
> dhclient iwi0
>
> But now, the first step fails. The device is still
present under
> ifconfig though.
>
> My world/kernel is only a couple weeks old, perhaps I
cvsup'ed at
> exactly the wrong time (during some commit)?
>
I cvsup'ed this morning, did a full builld world/kernel and
reinstalled iwi-firmware and the adapter can associate
again. I
haven't yet tried to acquire an ip since I am remote and
don't want to
lose my connection, but I don't think there will be a
problem there.
_______________________________________________
freebsd-questions freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"
|