|
List Info
Thread: freebsd doesm't see my script on boot
|
|
| freebsd doesm't see my script on boot |
|
2006-11-27 16:30:43 |
Hello, Everybody
Well, here is what I am doing:
ls -l /usr/local/etc/rc.d
total 30
-r-xr-xr-x 1 root wheel 4744 Nov 13 11:38 apache22
-r-xr-xr-x 1 root wheel 673 Nov 13 14:27 clamav-clamd
-r-xr-xr-x 1 root wheel 722 Nov 13 14:27
clamav-freshclam
-r-xr-xr-x 1 root wheel 1057 Nov 13 14:27 clamav-milter
-r-xr-xr-x 1 root wheel 1254 Nov 13 13:01 gnugk
-r-xr-xr-x 1 root wheel 198 Nov 15 01:17 l2tpd
-r-xr-xr-x 1 root wheel 196 Nov 14 12:35 popa3d
-r-xr-xr-x 1 root wheel 1642 Nov 13 11:19 quagga
-r-xr-xr-x 1 root wheel 4371 Nov 13 14:00 samba
-r-xr-xr-x 1 root wheel 1324 Nov 14 15:20 squid
-r-xr-xr-x 1 root wheel 564 Nov 13 11:19 watchquagga
cat /usr/local/etc/rc.d/l2tpd
#!/bin/sh
#PROVIDE l2tpd
#REQUIRE NETWORKING
. /etc/rc.subr
name="l2tpd"
rcvar=`set_rcvar`
command="/usr/local/sbin/$"
flags=""
echo "l2tp debug"
load_rc_config $name
run_rc_command "$1"
in rc.conf:
l2tpd_enable="YES"
Then after reboot:
ps ax | grep l2tpd
667 v1 RL+ 0:00.00 grep l2tpd
i.e no l2tpd has been started.
no messages on console, either. My script just got silently
skipped, all
other services are starting up fine.
What's wrong?
--
With best regards,
Gregory Edigarov
_______________________________________________
freebsd-questions freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"
|
|
| freebsd doesm't see my script on boot |
|
2006-11-27 17:02:01 |
On Mon, Nov 27, 2006 at 06:30:43PM +0200, Gregory Edigarov
wrote:
> Hello, Everybody
>
> Well, here is what I am doing:
> ls -l /usr/local/etc/rc.d
> total 30
> -r-xr-xr-x 1 root wheel 4744 Nov 13 11:38 apache22
> -r-xr-xr-x 1 root wheel 673 Nov 13 14:27
clamav-clamd
> -r-xr-xr-x 1 root wheel 722 Nov 13 14:27
clamav-freshclam
> -r-xr-xr-x 1 root wheel 1057 Nov 13 14:27
clamav-milter
> -r-xr-xr-x 1 root wheel 1254 Nov 13 13:01 gnugk
> -r-xr-xr-x 1 root wheel 198 Nov 15 01:17 l2tpd
> -r-xr-xr-x 1 root wheel 196 Nov 14 12:35 popa3d
> -r-xr-xr-x 1 root wheel 1642 Nov 13 11:19 quagga
> -r-xr-xr-x 1 root wheel 4371 Nov 13 14:00 samba
> -r-xr-xr-x 1 root wheel 1324 Nov 14 15:20 squid
> -r-xr-xr-x 1 root wheel 564 Nov 13 11:19
watchquagga
Doesn't the name need to end in '.sh' to be recognized and
run from rc.d?
It used to be that way anyway and I haven't noticed that it
has changed.
Try changing the name to l2tpd.sh -- and leave it
executable, of course.
////jerry
> cat /usr/local/etc/rc.d/l2tpd
> #!/bin/sh
>
> #PROVIDE l2tpd
> #REQUIRE NETWORKING
>
> . /etc/rc.subr
>
> name="l2tpd"
> rcvar=`set_rcvar`
> command="/usr/local/sbin/$"
> flags=""
> echo "l2tp debug"
>
> load_rc_config $name
> run_rc_command "$1"
>
> in rc.conf:
> l2tpd_enable="YES"
>
> Then after reboot:
> ps ax | grep l2tpd
> 667 v1 RL+ 0:00.00 grep l2tpd
>
> i.e no l2tpd has been started.
> no messages on console, either. My script just got
silently skipped, all
> other services are starting up fine.
>
> What's wrong?
>
> --
> With best regards,
> Gregory Edigarov
>
>
>
> _______________________________________________
> freebsd-questionsfreebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
> To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"
_______________________________________________
freebsd-questionsfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"
|
|
| freebsd doesm't see my script on boot |
|
2006-11-27 17:27:44 |
Gregory Edigarov wrote:
> Hello, Everybody
>
> Well, here is what I am doing:
> ls -l /usr/local/etc/rc.d
> total 30
> -r-xr-xr-x 1 root wheel 4744 Nov 13 11:38 apache22
> -r-xr-xr-x 1 root wheel 673 Nov 13 14:27
clamav-clamd
> -r-xr-xr-x 1 root wheel 722 Nov 13 14:27
clamav-freshclam
> -r-xr-xr-x 1 root wheel 1057 Nov 13 14:27
clamav-milter
> -r-xr-xr-x 1 root wheel 1254 Nov 13 13:01 gnugk
> -r-xr-xr-x 1 root wheel 198 Nov 15 01:17 l2tpd
> -r-xr-xr-x 1 root wheel 196 Nov 14 12:35 popa3d
> -r-xr-xr-x 1 root wheel 1642 Nov 13 11:19 quagga
> -r-xr-xr-x 1 root wheel 4371 Nov 13 14:00 samba
> -r-xr-xr-x 1 root wheel 1324 Nov 14 15:20 squid
> -r-xr-xr-x 1 root wheel 564 Nov 13 11:19
watchquagga
>
> cat /usr/local/etc/rc.d/l2tpd
> #!/bin/sh
>
> #PROVIDE l2tpd
> #REQUIRE NETWORKING
>
> . /etc/rc.subr
>
> name="l2tpd"
> rcvar=`set_rcvar`
> command="/usr/local/sbin/$"
> flags=""
> echo "l2tp debug"
>
> load_rc_config $name
> run_rc_command "$1"
>
> in rc.conf:
> l2tpd_enable="YES"
>
> Then after reboot:
> ps ax | grep l2tpd
> 667 v1 RL+ 0:00.00 grep l2tpd
>
> i.e no l2tpd has been started.
> no messages on console, either. My script just got
silently skipped, all
> other services are starting up fine.
>
> What's wrong?
>
Does it work if you run it manually?
does it start if you run
/etc/rc.d/localpkg start
not certain this will help but try adding
verbose_loading="YES"
to /boot/loader.conf
to see if that give more info on startup.
Also try adding set -x to your script to enable more
debugging output
is you think you need it
Vince
_______________________________________________
freebsd-questionsfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"
|
|
| freebsd doesm't see my script on boot |
|
2006-11-27 17:39:57 |
On Monday 27 November 2006 10:30, Gregory Edigarov wrote:
> Hello, Everybody
>
> Well, here is what I am doing:
> ls -l /usr/local/etc/rc.d
> total 30
> -r-xr-xr-x 1 root wheel 4744 Nov 13 11:38 apache22
> -r-xr-xr-x 1 root wheel 673 Nov 13 14:27
clamav-clamd
> -r-xr-xr-x 1 root wheel 722 Nov 13 14:27
clamav-freshclam
> -r-xr-xr-x 1 root wheel 1057 Nov 13 14:27
clamav-milter
> -r-xr-xr-x 1 root wheel 1254 Nov 13 13:01 gnugk
> -r-xr-xr-x 1 root wheel 198 Nov 15 01:17 l2tpd
> -r-xr-xr-x 1 root wheel 196 Nov 14 12:35 popa3d
> -r-xr-xr-x 1 root wheel 1642 Nov 13 11:19 quagga
> -r-xr-xr-x 1 root wheel 4371 Nov 13 14:00 samba
> -r-xr-xr-x 1 root wheel 1324 Nov 14 15:20 squid
> -r-xr-xr-x 1 root wheel 564 Nov 13 11:19
watchquagga
>
> cat /usr/local/etc/rc.d/l2tpd
> #!/bin/sh
>
> #PROVIDE l2tpd
> #REQUIRE NETWORKING
>
> . /etc/rc.subr
>
> name="l2tpd"
> rcvar=`set_rcvar`
> command="/usr/local/sbin/$"
> flags=""
> echo "l2tp debug"
>
> load_rc_config $name
> run_rc_command "$1"
>
> in rc.conf:
> l2tpd_enable="YES"
>
> Then after reboot:
> ps ax | grep l2tpd
> 667 v1 RL+ 0:00.00 grep l2tpd
>
> i.e no l2tpd has been started.
> no messages on console, either. My script just got
silently skipped, all
> other services are starting up fine.
>
> What's wrong?
Maybe l2tpd is failing after initialization? Do you see
"l2tp debug"
during "local package initialization" section of
boot?
Try this:
/etc/rc.d/localpkg restart
does it show up? Does anything show up?
Can you run it manually? If not then it might be that l2tp
is silently
failing during initialization.
lane
_______________________________________________
freebsd-questionsfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"
|
|
| freebsd doesm't see my script on boot |
|
2006-11-27 17:43:15 |
On Monday 27 November 2006 11:02, Jerry McAllister wrote:
> On Mon, Nov 27, 2006 at 06:30:43PM +0200, Gregory
Edigarov wrote:
> > Hello, Everybody
> >
> > Well, here is what I am doing:
> > ls -l /usr/local/etc/rc.d
> > total 30
> > -r-xr-xr-x 1 root wheel 4744 Nov 13 11:38
apache22
> > -r-xr-xr-x 1 root wheel 673 Nov 13 14:27
clamav-clamd
> > -r-xr-xr-x 1 root wheel 722 Nov 13 14:27
clamav-freshclam
> > -r-xr-xr-x 1 root wheel 1057 Nov 13 14:27
clamav-milter
> > -r-xr-xr-x 1 root wheel 1254 Nov 13 13:01 gnugk
> > -r-xr-xr-x 1 root wheel 198 Nov 15 01:17 l2tpd
> > -r-xr-xr-x 1 root wheel 196 Nov 14 12:35
popa3d
> > -r-xr-xr-x 1 root wheel 1642 Nov 13 11:19
quagga
> > -r-xr-xr-x 1 root wheel 4371 Nov 13 14:00 samba
> > -r-xr-xr-x 1 root wheel 1324 Nov 14 15:20 squid
> > -r-xr-xr-x 1 root wheel 564 Nov 13 11:19
watchquagga
>
> Doesn't the name need to end in '.sh' to be recognized
and run from rc.d?
>
> It used to be that way anyway and I haven't noticed
that it
> has changed.
>
> Try changing the name to l2tpd.sh -- and leave it
executable, of course.
>
> ////jerry
>
> > cat /usr/local/etc/rc.d/l2tpd
> > #!/bin/sh
> >
> > #PROVIDE l2tpd
> > #REQUIRE NETWORKING
> >
> > . /etc/rc.subr
> >
> > name="l2tpd"
> > rcvar=`set_rcvar`
> > command="/usr/local/sbin/$"
> > flags=""
> > echo "l2tp debug"
> >
> > load_rc_config $name
> > run_rc_command "$1"
> >
> > in rc.conf:
> > l2tpd_enable="YES"
> >
> > Then after reboot:
> > ps ax | grep l2tpd
> > 667 v1 RL+ 0:00.00 grep l2tpd
> >
> > i.e no l2tpd has been started.
> > no messages on console, either. My script just got
silently skipped, all
> > other services are starting up fine.
> >
> > What's wrong?
> >
> > --
> > With best regards,
> > Gregory Edigarov
> >
> >
> >
I think it changed in 6.X. 6.1 still recognizes the .sh
extension, but it
will also execute scripts in /usr/local/etc/rc.d that DON'T
have the
extension.
lane
_______________________________________________
freebsd-questionsfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"
|
|
| freebsd doesm't see my script on boot |
|
2006-11-30 21:12:24 |
Gregory Edigarov wrote:
[...]
>
> #PROVIDE l2tpd
> #REQUIRE NETWORKING
Try changing those lines to:
# PROVIDE: l2tpd
# REQUIRE: NETWORKING
^ ^
(add empty spaces and colons)
Regards,
Mikhail.
--
Mikhail Goriachev
Webanoide
Telephone: +61 (0)3 62252501
Mobile Phone: +61 (0)4 38255158
E-Mail: mikhailgwebanoide.org
Web: http://www.webanoide.org
PGP Key ID: 0x4E148A3B
PGP Key Fingerprint: D96B 7C14 79A5 8824 B99D 9562 F50E 2F5D
4E14 8A3B
_______________________________________________
freebsd-questionsfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"
|
|
[1-6]
|
|
|
about | contact Other archives ( Real Estate discussion Medical topics )
|