Major version binary upgrade 6.3-RELEASE -> 7-RELEASE

Hi,

in my testing environemnt I've tryied binary upgrade from
6.3-RELEASE -> 7-RELEASE by following Colin Percival's
article at http://www.daemonology.net/blog/200
7-11-11-freebsd-major-version-upgrade.html

I am stuck at the step "portupgrade -f ruby":   

--->  Reinstalling 'ruby-1.8.6.111_1,1' (lang/ruby18)
--->  Building '/usr/ports/lang/ruby18'
===>  Cleaning for ruby-1.8.6.111_1,1
===>  Found saved configuration for ruby-1.8.6,1
===>  Extracting for ruby-1.8.6.111_1,1
=> MD5 Checksum OK for ruby/ruby-1.8.6-p111.tar.bz2.
=> SHA256 Checksum OK for ruby/ruby-1.8.6-p111.tar.bz2.
/bin/mv
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/dl/h2rb
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/bin/
===>  Patching for ruby-1.8.6.111_1,1
===>  Applying FreeBSD patches for ruby-1.8.6.111_1,1
/usr/bin/sed -i.bak -e 's|-l$pthread_lib|-pthread|g' 
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/configure
/bin/rm -rf
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/Win32API
/bin/rm -rf
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/win32ole
/bin/mv /usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/gdbm
/usr/ports/lang/ruby18/work/
/bin/mv
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/iconv
/usr/ports/lang/ruby18/work/
/bin/mv /usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/tk
/usr/ports/lang/ruby18/work/
===>  Configuring for ruby-1.8.6.111_1,1
/usr/bin/touch
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/configure
configure: WARNING: you should use --build, --host,
--target
checking build system type... i386-portbld-freebsd6
checking host system type... i386-portbld-freebsd6
checking target system type... i386-portbld-freebsd6
checking for i386-portbld-freebsd6-gcc... cc
checking for C compiler default output file name... a.out
checking whether the C compiler works... Bad system call
(core dumped)
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details.
===>  Script "configure" failed unexpectedly.
Please report the problem to stasFreeBSD.org [maintainer]
and attach the
"/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/config.log
" including the output
of the failure of your make command. Also, it might be a
good idea to provide
an overview of all packages installed on your system (e.g.
an `ls
/var/db/pkg`).
*** Error code 1

Stop in /usr/ports/lang/ruby18.
*** Error code 1

Stop in /usr/ports/lang/ruby18.
    ! lang/ruby18 (ruby-1.8.6.111_1,1)    (configure error)



Any suggestions? Thank you.
Dan.









     
____________________________________________________________
________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/ca
tegory.php?category=shopping
_______________________________________________
freebsd-questionsfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"

At 06:22 AM 3/14/2008, Daniel Demacek wrote:
>Hi,
>
>in my testing environemnt I've tryied binary upgrade
from 6.3-RELEASE -> 
>7-RELEASE by following Colin Percival's article at 
>http://www.daemonology.net/blog/200
7-11-11-freebsd-major-version-upgrade.html
>
>I am stuck at the step "portupgrade -f ruby":
>
>--->  Reinstalling 'ruby-1.8.6.111_1,1'
(lang/ruby18)
>--->  Building '/usr/ports/lang/ruby18'
>===>  Cleaning for ruby-1.8.6.111_1,1
>===>  Found saved configuration for ruby-1.8.6,1
>===>  Extracting for ruby-1.8.6.111_1,1
>=> MD5 Checksum OK for ruby/ruby-1.8.6-p111.tar.bz2.
>=> SHA256 Checksum OK for
ruby/ruby-1.8.6-p111.tar.bz2.
>/bin/mv
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/dl/h2rb 
>/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/bin/
>===>  Patching for ruby-1.8.6.111_1,1
>===>  Applying FreeBSD patches for
ruby-1.8.6.111_1,1
>/usr/bin/sed -i.bak -e 
>'s|-l$pthread_lib|-pthread|g' 
>/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/configure
>/bin/rm -rf
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/Win32API
>/bin/rm -rf
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/win32ole
>/bin/mv
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/gdbm 
>/usr/ports/lang/ruby18/work/
>/bin/mv
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/iconv 
>/usr/ports/lang/ruby18/work/
>/bin/mv
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/tk 
>/usr/ports/lang/ruby18/work/
>===>  Configuring for ruby-1.8.6.111_1,1
>/usr/bin/touch
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/configure
>configure: WARNING: you should use --build, --host,
--target
>checking build system type... i386-portbld-freebsd6
>checking host system type... i386-portbld-freebsd6
>checking target system type... i386-portbld-freebsd6
>checking for i386-portbld-freebsd6-gcc... cc
>checking for C compiler default output file name...
a.out
>checking whether the C compiler works... Bad system call
(core dumped)
>configure: error: cannot run C compiled programs.
>If you meant to cross compile, use `--host'.
>See `config.log' for more details.
>===>  Script "configure" failed
unexpectedly.
>Please report the problem to stasFreeBSD.org [maintainer]
and attach the
>"/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/config
.log" including the output
>of the failure of your make command. Also, it might be a
good idea to provide
>an overview of all packages installed on your system
(e.g. an `ls
>/var/db/pkg`).
>*** Error code 1
>
>Stop in /usr/ports/lang/ruby18.
>*** Error code 1
>
>Stop in /usr/ports/lang/ruby18.
>     ! lang/ruby18 (ruby-1.8.6.111_1,1)    (configure
error)
>
>
>
>Any suggestions? Thank you.
>Dan.
>

Try:

portupgrade -fP ruby

instead to install ruby from the 7.0 built package.

         -Derek

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

_______________________________________________
freebsd-questionsfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"

my machine is 7.0-RELEASE

# portupgrade -f ruby
===>  Found saved configuration for ruby-1.8.6.111_1,1

===>  Extracting for ruby-1.8.6.111_1,1

=> MD5 Checksum OK for ruby/ruby-1.8.6-p111.tar.bz2.

=> SHA256 Checksum OK for ruby/ruby-1.8.6-p111.tar.bz2.

/bin/mv
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/dl/h2rb
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/bin/

===>  Patching for ruby-1.8.6.111_1,1

===>  Applying FreeBSD patches for ruby-1.8.6.111_1,1

/usr/bin/sed -i.bak -e 's|-l$pthread_lib|-pthread|g'
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/configure

/bin/rm -rf
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/Win32API

/bin/rm -rf
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/win32ole

/bin/mv
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/gdbm
/usr/ports/lang/ruby18/work/

/bin/mv
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/iconv
/usr/ports/lang/ruby18/work/

/bin/mv /usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/tk
/usr/ports/lang/ruby18/work/

===>  Configuring for ruby-1.8.6.111_1,1

/usr/bin/touch
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/configure

configure: WARNING: you should use --build, --host,
--target

checking build system type... i386-portbld-freebsd7

checking host system type... i386-portbld-freebsd7

checking target system type... i386-portbld-freebsd7

checking for i386-portbld-freebsd7-gcc... cc

checking for C compiler default output file name... a.out

checking whether the C compiler works... yes

checking whether we are cross compiling... no

...(continuing)...
===>  Cleaning for ruby-1.8.6.111_1,1

--->  Cleaning out obsolete shared libraries


successfully finished.
can you compile&run C program on your machine?

hsmtkkgmail.com
_______________________________________________
freebsd-questionsfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-que
stions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribefreebsd.org"

Em Friday 14 March 2008 08:22:14 Daniel Demacek escreveu:
> Hi,
>
> in my testing environemnt I've tryied binary upgrade
from 6.3-RELEASE ->
> 7-RELEASE by following Colin Percival's article at
> http://www.daemonology.net/blog/2007-
11-11-freebsd-major-version-upgrade.ht
>ml
>
> I am stuck at the step "portupgrade -f
ruby":
>
> --->  Reinstalling 'ruby-1.8.6.111_1,1'
(lang/ruby18)
> --->  Building '/usr/ports/lang/ruby18'
> ===>  Cleaning for ruby-1.8.6.111_1,1
> ===>  Found saved configuration for ruby-1.8.6,1
> ===>  Extracting for ruby-1.8.6.111_1,1
> => MD5 Checksum OK for
ruby/ruby-1.8.6-p111.tar.bz2.
> => SHA256 Checksum OK for
ruby/ruby-1.8.6-p111.tar.bz2.
> /bin/mv
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/dl/h2rb
> /usr/ports/lang/ruby18/work/ruby-1.8.6-p111/bin/
===>  Patching for
> ruby-1.8.6.111_1,1
> ===>  Applying FreeBSD patches for
ruby-1.8.6.111_1,1
> /usr/bin/sed -i.bak -e 's|-l$pthread_lib|-pthread|g' 
> /usr/ports/lang/ruby18/work/ruby-1.8.6-p111/configure
/bin/rm -rf
>
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/Win32API
/bin/rm -rf
>
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/win32ole
/bin/mv
> /usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/gdbm
> /usr/ports/lang/ruby18/work/ /bin/mv
> /usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/iconv
> /usr/ports/lang/ruby18/work/ /bin/mv
> /usr/ports/lang/ruby18/work/ruby-1.8.6-p111/ext/tk
> /usr/ports/lang/ruby18/work/ ===>  Configuring for
ruby-1.8.6.111_1,1
> /usr/bin/touch
/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/configure
> configure: WARNING: you should use --build, --host,
--target
> checking build system type... i386-portbld-freebsd6
> checking host system type... i386-portbld-freebsd6
> checking target system type... i386-portbld-freebsd6
> checking for i386-portbld-freebsd6-gcc... cc
> checking for C compiler default output file name...
a.out
> checking whether the C compiler works... Bad system
call (core dumped)
> configure: error: cannot run C compiled programs.
> If you meant to cross compile, use `--host'.
> See `config.log' for more details.
> ===>  Script "configure" failed
unexpectedly.
> Please report the problem to stasFreeBSD.org [maintainer]
and attach the
>
"/usr/ports/lang/ruby18/work/ruby-1.8.6-p111/config.log
" including the
> output of the failure of your make command. Also, it
might be a good idea
> to provide an overview of all packages installed on
your system (e.g. an
> `ls
> /var/db/pkg`).
> *** Error code 1
>
> Stop in /usr/ports/lang/ruby18.
> *** Error code 1
>
> Stop in /usr/ports/lang/ruby18.
>     ! lang/ruby18 (ruby-1.8.6.111_1,1)    (configure
error)
>
>
>
> Any suggestions? Thank you.
> Dan.
>
>
>
>
In my experience, when I moved from 6.2 to 7.0 I had to
recompile portupgrade 
at hand first. To do this you need to recompile portupgrade
and all his 
dependencies by doing 'make install clean' in each one. Yes,
ruby is one of 
the portupgrade dependencies... And after, with a fresh
portupgrade compiled 
in the new 7.0 environment, I've done portupgrade -fa.

-- 
Aline de Freitas - Chave pública: ID DE632016 /
keys.indymedia.org
gpg --keyserver keys.indymedia.org --recv-keys DE632016