Can not deliver to cyrus imapd

Thread: Can not deliver to cyrus imapd

Search this list only Search all lists
Can not deliver to cyrus imapd
	2006-01-29 18:12:08
Hello On my two machines (FreeBSD 5.4) I'm not able to compile sendmail with other mailer then the default ones. The hole thread and the details you can see in comp.mail.senmdail (link: http://groups.google.com/group/comp.mail.sendmail/b rowse_thread/thread/a9c1364a7b98be36/0e04b81274290cb3#0e04b8 1274290cb3 ). My goal is to use sendmail and cyrus impad 2.3. The problem is if I change the mailer in sendmail.mc nothing appears. I also checked sendmail.cf. There are no other mailers the the default ones. I'm very confused about the problem. Any ideas are very welcome. -- Regards Martin <infopc-service.ch> PC-Service M. Schweizer GmbH; Bannholzstrasse 6; CH-8608 Bubikon Tel. +41 55 243 30 00; Fax: +41 55 243 33 22; http://www.pc-service.ch; public key : http://w ww.pc-service.ch/pgp/public_key.asc; fingerprint: EC21 CA4D 5C78 BC2D 73B7 10F9 C1AE 1691 D30F D239;

Can not deliver to cyrus imapd
	2006-01-29 18:15:36
Sorry but the Google link was wrong. I attached the hole thread at the end from this post. Am Sun, Jan 29, 2006 at 07:12:08PM +0100 Martin Schweizer schrieb: > Hello > > On my two machines (FreeBSD 5.4) I'm not able to compile sendmail with other mailer then the default ones. The hole thread > and the details you can see in comp.mail.senmdail (link: > http://groups.google.com/group/comp.mail.sendmail/b rowse_thread/thread/a9c1364a7b98be36/0e04b81274290cb3#0e04b8 1274290cb3 ). > > My goal is to use sendmail and cyrus impad 2.3. The problem is if I change the mailer in sendmail.mc nothing appears. I also > checked sendmail.cf. There are no other mailers the the default ones. I'm very confused about the problem. Any ideas are > very welcome. > My system: FreeBSD 5.4 Sendmail 8.13.3/8.13 I want to deliver mails to the cyrus imapd (like described in the manuel from cyrus). But the problem is sendmail delivers only to /var/mail.. . If I start sendmail -bt and type in M= it gets: ADDRESS TEST MODE (ruleset 3 NOT automatically invoked) Enter <ruleset> <address> > mailer 0 (prog): P=/bin/sh S=EnvFromL/HdrFromL R=EnvToL/HdrToL M=0 U=-1:-1 F=9DFMeloqsu L=0 E=n T=X-Unix/X-Unix/X-Unix r=10 0 A=sh -c $u mailer 1 (file): P=[FILE] S=parse/parse R=parse/parse M=0 U=-1:-1 F=9DEFMPloqsu L=0 E=n T=X-Unix/X-Unix/X-Unix r=100 A=FILE $u mailer 2 (include): P=/dev/null S=parse/parse R=parse/parse M=0 U=-1:-1 F=su L=0 E=n T=<undefined>/<undefined>/<undefined> r=100 A=INCLUDE $u mailer 3 (local): P=/usr/libexec/mail.local S=EnvFromSMTP/HdrFromL R=EnvToL/HdrToL M=0 U=-1:-1 F=/59:ADFMPSXlmnqswz\| L=0 E=r n T=DNS/RFC822/SMTP r=100 A=mail.local -l mailer 4 (smtp): P=[IPC] S=EnvFromSMTP/HdrFromSMTP R=EnvToSMTP/EnvToSMTP M=0 U=-1:-1 F=DFMXmu L=990 E=rn T=DNS/RFC822/SMTP r =100 A=TCP $h mailer 5 (esmtp): P=[IPC] S=EnvFromSMTP/HdrFromSMTP R=EnvToSMTP/EnvToSMTP M=0 U=-1:-1 F=DFMXamu L=990 E=rn T=DNS/RFC822/SMTP r=100 A=TCP $h mailer 6 (smtp8): P=[IPC] S=EnvFromSMTP/HdrFromSMTP R=EnvToSMTP/EnvToSMTP M=0 U=-1:-1 F=8DFMXmu L=990 E=rn T=DNS/RFC822/SMTP r=100 A=TCP $h mailer 7 (dsmtp): P=[IPC] S=EnvFromSMTP/HdrFromSMTP R=EnvToSMTP/EnvToSMTP M=0 U=-1:-1 F=%DFMXamu L=990 E=rn T=DNS/RFC822/SMTP r=100 A=TCP $h mailer 8 (relay): P=[IPC] S=EnvFromSMTP/HdrFromSMTP R=MasqSMTP/MasqSMTP M=0 U=-1:-1 F=8DFMXamu L=2040 E=rn T=DNS/RFC822/SMTP r=100 A=TCP $h Is this correct? I expect one line with cyrus... Any ideas? Thank you in advance. Here is my sendmail.mc: divert(0) VERSIONID(`$FreeBSD: src/etc/sendmail/freebsd.mc,v 1.29 2003/12/24 21:15:09 gshapiro Exp $') OSTYPE(freebsd5) DOMAIN(generic) FEATURE(access_db, `hash -o -T<TMPF> /etc/mail/access') FEATURE(blacklist_recipients) FEATURE(local_lmtp) FEATURE(mailertable, `hash -o /etc/mail/mailertable') FEATURE(virtusertable, `hash -o /etc/mail/virtusertable') define(`confCW_FILE', `-o /etc/mail/local-host-names') dnl The group needs to be mail in order to read the sasldb2 file define(`confRUN_AS_USER',`root:mail')dnl define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile')d nl define(`confAUTH_MECHANISMS',`LOGIN PLAIN')dnl TRUST_AUTH_MECH(`LOGIN PLAIN')dnl FEATURE(`access_db') DAEMON_OPTIONS(`Name=IPv4, Family=inet') DAEMON_OPTIONS(`Name=IPv6, Family=inet6, Modifiers=O') define(`confBIND_OPTS', `WorkAroundBrokenAAAA') define(`confNO_RCPT_ACTION', `add-to-undisclosed') define(`confPRIVACY_FLAGS', `authwarnings,noexpn,novrfy') define(`confLOCAL_MAILER', `cyrusv2') MAILER(local) MAILER(cyrusv2) MAILER(smtp) Kind regards, Martin Antworten Andrzej Adam Filip 26 Jan. 10:17 Optionen anzeigen - Zitierten Text anzeigen - sendmail.mc looks ok. Standard set of "startup" questions: 1) Have you generated new sendmail.cf after modifying .mc file? 2) Have you restarted (or HUPed) sendmail daemon? [ the daemon rememembers "at startup" sendmail.cf ] 3) What is reported by the test commands below? [ run it as root ] echo '3,0 userx' \| sendmail -bt echo '3,0 userx' \| sendmail -d21.12 -bt -- [en: Andrew] Andrzej Adam Filip : a...priv.onet.pl : a...xl.wp.pl http://www.sendmail.org/ faq/ http://www.sen dmail.org/m4/readme.html http://anfi.homeunix.net/sendmail/B4UAsk-Sendmail.html Netcraft Site Rank: 529048 Antworten schweizer.mar...gmail.com 26 Jan. 10:42 Optionen anzeigen Hello Andrzej 1) Have you generated new sendmail.cf after modifying .mc file? Yes, I did. In FreeBSD you can it do very easy (make ...) 2) Have you restarted (or HUPed) sendmail daemon? [ the daemon rememembers "at startup" sendmail.cf ] I restarted more then once the hole server. 3) What is reported by the test commands below? Here is the the output of the two commands: acsvfbsd02# echo '3,0 userx'\|sendmail -bt ADDRESS TEST MODE (ruleset 3 NOT automatically invoked) Enter <ruleset> <address> > canonify input: userx Canonify2 input: userx Canonify2 returns: userx canonify returns: userx parse input: userx Parse0 input: userx Parse0 returns: userx ParseLocal input: userx ParseLocal returns: userx Parse1 input: userx Parse1 returns: $# local $: userx parse returns: $# local $: userx > acsvfbsd02# echo '3,0 userx' \| sendmail -d21-12 -bt ADDRESS TEST MODE (ruleset 3 NOT automatically invoked) Enter <ruleset> <address> > canonify input: userx Canonify2 input: userx Canonify2 returns: userx canonify returns: userx parse input: userx Parse0 input: userx Parse0 returns: userx ParseLocal input: userx ParseLocal returns: userx Parse1 input: userx Parse1 returns: $# local $: userx parse returns: $# local $: userx Any ideas? Regards, Martin Antworten Rob MacGregor 27 Jan. 21:01 Optionen anzeigen schweizer.mar...gmail.com wrote: > Hello Andrzej > 1) Have you generated new sendmail.cf after modifying .mc file? > Yes, I did. In FreeBSD you can it do very easy (make ...) <---SNIP---> > Any ideas? Contents of the .mc file? -- Rob MacGregor (BOFH) Oh my God! They killed init! You bastards! This landing is gonna get pretty interesting. Define "interesting". Oh God, oh God, we're all going to die? Antworten Andrzej Adam Filip 27 Jan. 21:24 Optionen anzeigen - Zitierten Text anzeigen - It looks like sendmail.cf generated from .mc file without local mailer "redirection" you have in your .mc file: define(`confLOCAL_MAILER', `cyrusv2') > > acsvfbsd02# echo '3,0 userx' \| sendmail -d21-12 -bt It should be "-d21.12" but first test was sufficient. > Any ideas? I bet on some problems during .mc -> sendmail.cf conversion. -- [en: Andrew] Andrzej Adam Filip : a...priv.onet.pl : a...xl.wp.pl http://www.sendmail.org/ faq/ http://www.sen dmail.org/m4/readme.html http://anfi.homeunix.net/sendmail/B4UAsk-Sendmail.html Netcraft Site Rank: 530672 Antworten Andrzej Adam Filip 27 Jan. 21:24 Optionen anzeigen Rob MacGregor <m...privacy.net> writes: > schweizer.mar...gmail.com wrote: > > Hello Andrzej > > 1) Have you generated new sendmail.cf after modifying .mc file? > > Yes, I did. In FreeBSD you can it do very easy (make ...) > <---SNIP---> > > Any ideas? > Contents of the .mc file? It was posted at the end of post starting the thread. -- [en: Andrew] Andrzej Adam Filip : a...priv.onet.pl : a...xl.wp.pl http://www.sendmail.org/ faq/ http://www.sen dmail.org/m4/readme.html http://anfi.homeunix.net/sendmail/B4UAsk-Sendmail.html Netcraft Site Rank: 530672 Antworten schweizer.mar...gmail.com 29 Jan. 16:41 Optionen anzeigen Hello > It looks like sendmail.cf generated from .mc file without local mailer "redirection" you have in your .mc file: > define(`confLOCAL_MAILER', `cyrusv2') > I bet on some problems during .mc -> sendmail.cf conversion. Here is the mailer partition from sendmail.cf ############################################################ ########## ############################################################ ########## ##### ##### MAIL FILTER DEFINITIONS ##### ############################################################ ########## ############################################################ ########## # ############################################################ ########## ############################################################ ########## ##### ##### MAILER DEFINITIONS ##### ############################################################ ########## ############################################################ ########## ################################################## ### Local and Program Mailer specification ### ################################################## ##### $Id: local.m4,v 8.59 2004/11/23 00:37:25 ca Exp $ ##### # # Envelope sender rewriting # SEnvFromL R<> $n errors to mailer-daemon R < $> $n temporarily bypass Sun bogosity R$+ $: $>AddDomain $1 add local domain if needed R$ $: $>MasqEnv $1 do masquerading # # Envelope recipient rewriting # SEnvToL R$+ < $* > $: $1 strip host part R$+ + $* $: < $& > $1 + $2 mark with addr type R<e s> $+ + $* $: $1 remove +detail for sender R< $* > $+ $: $2 else remove mark # # Header sender rewriting # SHdrFromL R<> $n errors to mailer-daemon R < $> $n temporarily bypass Sun bogosity R$+ $: $>AddDomain $1 add local domain if needed R$ $: $>MasqHdr $1 do masquerading # # Header recipient rewriting # SHdrToL R$+ $: $>AddDomain $1 add local domain if needed R$* < LOCAL > $* $: $1 < $j . > $2 # # Common code to add local domain name (only if always-add-domain) # SAddDomain Mlocal, P=/usr/libexec/mail.local, F=lsDFMAw5:/\|qPSXmnz9, S=EnvFromSMTP/HdrFromL, R=EnvToL/HdrToL, T=DNS/RFC822/SMTP, A=mail.local -l Mprog, P=/bin/sh, F=lsDFMoqeu9, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, D=$z:/, T=X-Unix/X-Unix/X-Unix, A=sh -c $u ##################################### ### SMTP Mailer specification ### ##################################### ##### $Id: smtp.m4,v 8.64 2001/04/03 01:52:54 gshapiro Exp $ ##### # # common sender and masquerading recipient rewriting # SMasqSMTP R$* < $* > $* $ $1 < $2 > $3 already fully qualified R$+ $ $1 < LOCAL > add local qualification # # convert pseudo-domain addresses to real domain addresses # SPseudoToReal # pass <route-addr>s through R< $+ > $* $ < $1 > $2 resolve <route-addr> # output fake domains as user%fakerelay # do UUCP heuristics; note that these are shared with UUCP mailers R$+ < $+ .UUCP. > $: < $2 ! > $1 convert to UUCP form R$+ < $* > $* $ $1 < $2 > $3 not UUCP form # leave these in .UUCP form to avoid further tampering R< $&h ! > $- ! $+ $ $2 < $1 .UUCP. > R< $&h ! > $-.$+ ! $+ $ $3 < $1.$2 > R< $&h ! > $+ $ $1 < $&h .UUCP. > R< $+ ! > $+ $: $1 ! $2 < $Y > use UUCP_RELAY R$+ < $~[ $* : $+ > $ $1 < $4 > strip mailer: part R$+ < > $: $1 < LOCAL > if no UUCP_RELAY # # envelope sender rewriting # SEnvFromSMTP R$+ $: $>PseudoToReal $1 sender/recipient common R$* :; <> $ list:; special case R$* $: $>MasqSMTP $1 qualify unqual'ed names R$+ $: $>MasqEnv $1 do masquerading # # envelope recipient rewriting -- # also header recipient if not masquerading recipients # SEnvToSMTP R$+ $: $>PseudoToReal $1 sender/recipient common R$+ $: $>MasqSMTP $1 qualify unqual'ed names R$* < LOCAL > $* $: $1 < $j . > $2 # # header sender and masquerading header recipient rewriting # SHdrFromSMTP R$+ $: $>PseudoToReal $1 sender/recipient common R:; <> $ list:; special case # do special header rewriting R$* <> $* $ $1 <> $2 pass null host through R< $* > $* $ < $1 > $2 pass route-addr through R$* $: $>MasqSMTP $1 qualify unqual'ed names R$+ $: $>MasqHdr $1 do masquerading # # relay mailer header masquerading recipient rewriting # SMasqRelay R$+ $: $>MasqSMTP $1 R$+ $: $>MasqHdr $1 Msmtp, P=[IPC], F=mDFMuX, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=rn, L=990, T=DNS/RFC822/SMTP, A=TCP $h Mesmtp, P=[IPC], F=mDFMuXa, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=rn, L=990, T=DNS/RFC822/SMTP, A=TCP $h Msmtp8, P=[IPC], F=mDFMuX8, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=rn, L=990, T=DNS/RFC822/SMTP, A=TCP $h Mdsmtp, P=[IPC], F=mDFMuXa%, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP, E=rn, L=990, T=DNS/RFC822/SMTP, A=TCP $h Mrelay, P=[IPC], F=mDFMuXa8, S=EnvFromSMTP/HdrFromSMTP, R=MasqSMTP, E=rn, L=2040, T=DNS/RFC822/SMTP, A=TCP $h Should be there the entries from /sendmail/cf/mailer/cyrusv2.m4? If yes, why the entries are not there? For testing reasons I changed the mailers (procmail, uucp, fax etc.) in the sendmail.mc and compiled it. The above entries did never change. In the attached maillog I also see never cyrusv2 as mailer: m-mta[702]: k0TEBtog000702: --- 220 acsvfbsd02.acutronic.ch ESMTP Sendmail 8.13.3/8.13.3; Sun, 29 Jan 2006 15:11:55 +0100 (CET) Jan 29 15:11:55 acsvfbsd02 sm-mta[702]: k0TEBtog000702: <-- XXXX [192.168.20.250] Jan 29 15:11:55 acsvfbsd02 sm-mta[702]: k0TEBtog000702: --- 500 5.5.1 Command unrecognized: "XXXX [192.168.20.250]" Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtog000702: <-- HELO [192.168.20.250] Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtog000702: --- 250 acsvfbsd02.acutronic.ch Hello [192.168.20.250], pleased to meet you Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtog000702: <-- MAIL FROM:<mar...acutronic.ch> Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtog000702: --- 250 2.1.0 <mar...acutronic.ch>... Sender ok Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtog000702: <-- RCPT TO:<mar...acutronic.ch> Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtog000702: --- 250 2.1.5 <mar...acutronic.ch>... Recipient ok Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtog000702: <-- DATA Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtog000702: --- 354 Enter mail, end with "." on a line by itself Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtog000702: from=<mar...acutronic.ch>, size=603, class=0, nrcpts=1, msgid=<43DCDB3E.32735.337...martin.acutronic.ch>, proto=SMTP, daemon=IPv4, relay=[192.168.20.250] Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtog000702: --- 250 2.0.0 k0TEBtog000702 Message accepted for delivery Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtoh000702: <-- QUIT Jan 29 15:11:56 acsvfbsd02 sm-mta[702]: k0TEBtoh000702: --- 221 2.0.0 acsvfbsd02.acutronic.ch closing connection Jan 29 15:11:56 acsvfbsd02 sm-mta[703]: k0TEBtog000702: to=<mar...acutronic.ch>, ctladdr=<mar...acutronic.ch> (1001/0), delay=00:00:00, xdelay=00:00:00, mailer=local, pri=30861, relay=local, dsn=2.0.0, stat=Sent Jan 29 15:11:56 acsvfbsd02 sm-mta[703]: k0TEBtog000702: done; delay=00:00:00, ntries=1 I also tested /parse in sendmail -bt with a local address (mar...acutronic.ch) and an external address (i...pc-service.ch). In the first case sendmail did not use cyrusv2 as I excepted. I see this strange problem on different machines. Any hints are welcome. > /parse i...pc-service.ch Cracked address = $g Parsing envelope recipient address canonify input: info pc-service . ch Canonify2 input: info < pc-service . ch > Canonify2 returns: info < pc-service . ch . > canonify returns: info < pc-service . ch . > parse input: info < pc-service . ch . > Parse0 input: info < pc-service . ch . > Parse0 returns: info < pc-service . ch . > ParseLocal input: info < pc-service . ch . > ParseLocal returns: info < pc-service . ch . > Parse1 input: info < pc-service . ch . > Mailertable input: < pc-service . ch > info < pc-service . ch . > Mailertable input: pc-service . < ch > info < pc-service . ch . > Mailertable returns: info < pc-service . ch . > Mailertable returns: info < pc-service . ch . > MailerToTriple input: < > info < pc-service . ch . > MailerToTriple returns: info < pc-service . ch . > Parse1 returns: $# esmtp $ pc-service . ch . $: info < pc-service . ch . > parse returns: $# esmtp $ pc-service . ch . $: info < pc-service . ch . > 2 input: info < pc-service . ch . > 2 returns: info < pc-service . ch . > EnvToSMTP input: info < pc-service . ch . > PseudoToReal input: info < pc-service . ch . > PseudoToReal returns: info < pc-service . ch . > MasqSMTP input: info < pc-service . ch . > MasqSMTP returns: info < pc-service . ch . > EnvToSMTP returns: info < pc-service . ch . > final input: info < pc-service . ch . > final returns: info pc-service . ch mailer esmtp, host pc-service.ch., user i...pc-service.ch > /parse mar...acutronic.ch Cracked address = $g Parsing envelope recipient address canonify input: martin acutronic . ch Canonify2 input: martin < acutronic . ch > Canonify2 returns: martin < acutronic . ch . > canonify returns: martin < acutronic . ch . > parse input: martin < acutronic . ch . > Parse0 input: martin < acutronic . ch . > Parse0 returns: martin < acutronic . ch . > ParseLocal input: martin < acutronic . ch . > ParseLocal returns: martin < acutronic . ch . > Parse1 input: martin < acutronic . ch . > Parse1 returns: $# local $: martin parse returns: $# local $: martin 2 input: martin 2 returns: martin EnvToL ... -- Regards Martin <infopc-service.ch> PC-Service M. Schweizer GmbH; Bannholzstrasse 6; CH-8608 Bubikon Tel. +41 55 243 30 00; Fax: +41 55 243 33 22; http://www.pc-service.ch; public key : http://w ww.pc-service.ch/pgp/public_key.asc; fingerprint: EC21 CA4D 5C78 BC2D 73B7 10F9 C1AE 1691 D30F D239;

Can not deliver to cyrus imapd
	2006-01-29 18:48:59
On Sunday 29 January 2006 13:12, Martin Schweizer wrote: > Hello > > On my two machines (FreeBSD 5.4) I'm not able to compile sendmail > with other mailer then the default ones. The hole thread and the > details you can see in comp.mail.senmdail (link: > http://groups.google.com/group/comp.mail.send mail/browse_thread/thr >ead/a9c1364a7b98be36/0e04b81274290cb3#0e04b81274290cb3 ). > > My goal is to use sendmail and cyrus impad 2.3. The problem is if I > change the mailer in sendmail.mc nothing appears. I also checked > sendmail.cf. There are no other mailers the the default ones. I'm > very confused about the problem. Any ideas are very welcome. I'm using cyrus-imapd22 in production on a few servers with the base sendmail. I'm assuming you have cyrus-imapd23 setup correctly. # set the sendmail password check method touch /usr/local/lib/sasl2/Sendmail.conf # add "pwcheck_method: saslauthd" to use sasl database # or "pwcheck_method: passwd" for normal login password checking # add to /etc/make.conf SENDMAIL_CFLAGS+= -I/usr/local/include -DSASL=2 -D_FFR_SMTP_SSL -DSOCKETMAP SENDMAIL_LDFLAGS+=-L/usr/local/lib SENDMAIL_LDADD+=-lsasl2 # set box specific .mc file in /etc/make.conf so upgrades # don't wipe out our existing settings SENDMAIL_MC=/etc/mail/host.mydomain.com.mc # build shared sendmail libs cd /usr/src/lib/libsm && make cleandir && make depend && make obj && make cd /usr/src/lib/libsmutil && make cleandir && make depend && make obj && make # now rebuild sendmail in the base cd /usr/src/usr.sbin/sendmail && make cleandir && make depend && make obj && make && make install # in for box specific .mc add dnl set SASL options define(`confAUTH_OPTIONS', `A p y')dnl dnl define(`confDEF_AUTH_INFO', /etc/mail/auth-info')dnl DAEMON_OPTIONS(`Port=smtp, Name=MSA, M=E')dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMSA, M=Es')dnl define(`confLOG_LEVEL', `13')dnl TRUST_AUTH_MECH(`LOGIN PLAIN')dnl define(`confAUTH_MECHANISMS',`LOGIN PLAIN')dnl define(`confLOCAL_MAILER',`cyrusv2') # stop and restart sendmail cd /etc/mail make make install make stop make start # check if it worked! telnet localhost 25 ehlo localhost If you're trying to host mail for multiple domains you'll need to hack the local ruleset to not strip the domain.tld from the address before it's passed to cyrus. The -DSOCKETMAP in the SENDMAIL_CFLAGS is needed, but I use it with a special rule to verify the From: address that comes from a locally hosted domain is actually valid by looking it up via cyrus. -- Anish Mistry

Can not deliver to cyrus imapd
	2006-01-31 21:10:29
Hello Anish Thank you for your hint. See my comment below (inline). Am Sun, Jan 29, 2006 at 01:48:59PM -0500 Anish Mistry schrieb: > On Sunday 29 January 2006 13:12, Martin Schweizer wrote: > > Hello > > > > On my two machines (FreeBSD 5.4) I'm not able to compile sendmail > > with other mailer then the default ones. The hole thread and the > > details you can see in comp.mail.senmdail (link: > > http://groups.google.com/group/comp.mail.send mail/browse_thread/thr > >ead/a9c1364a7b98be36/0e04b81274290cb3#0e04b81274290cb3 ). > > > > My goal is to use sendmail and cyrus impad 2.3. The problem is if I > > change the mailer in sendmail.mc nothing appears. I also checked > > sendmail.cf. There are no other mailers the the default ones. I'm > > very confused about the problem. Any ideas are very welcome. > I'm using cyrus-imapd22 in production on a few servers with the base > sendmail. I'm assuming you have cyrus-imapd23 setup correctly. > # set the sendmail password check method > touch /usr/local/lib/sasl2/Sendmail.conf > # add "pwcheck_method: saslauthd" to use sasl database > # or "pwcheck_method: passwd" for normal login password checking > # add to /etc/make.conf > SENDMAIL_CFLAGS+= -I/usr/local/include -DSASL=2 > -D_FFR_SMTP_SSL -DSOCKETMAP > SENDMAIL_LDFLAGS+=-L/usr/local/lib > SENDMAIL_LDADD+=-lsasl2 > # set box specific .mc file in /etc/make.conf so upgrades > # don't wipe out our existing settings > SENDMAIL_MC=/etc/mail/host.mydomain.com.mc > # build shared sendmail libs > cd /usr/src/lib/libsm && > make cleandir && make depend && make obj && make > cd /usr/src/lib/libsmutil && > make cleandir && make depend && make obj && make > # now rebuild sendmail in the base > cd /usr/src/usr.sbin/sendmail && > make cleandir && make depend && make obj && make && make install After make I get always this error: make: don't know how to make /usr/src/usr.sbin/sendmail/../../lib/libsmutil/libsmutil.a. Stop I also tested this hint from a newsgroup: "I followed some advice I found on the questi...freebsd.cz email list and after cvsup'ing my src I ran a 'make buildworld' in /usr/src. After the make buildworld finished I cd'd to /usr/src/usr.sbin/sendmail/ and did a make install and it installed just fine." ... but I always get the same error. Any ideas? -- Regards Martin <infopc-service.ch> PC-Service M. Schweizer GmbH; Bannholzstrasse 6; CH-8608 Bubikon Tel. +41 55 243 30 00; Fax: +41 55 243 33 22; http://www.pc-service.ch; public key : http://w ww.pc-service.ch/pgp/public_key.asc; fingerprint: EC21 CA4D 5C78 BC2D 73B7 10F9 C1AE 1691 D30F D239;

[1-4]

about | contact Other archives ( Real Estate discussion Medical topics )