Re: Unconditional 30s boot delay.

Ian FREISLICH wrote:
> Which is fine and well if routing runs *after* the DHCP
request,
> but it doesn't it runs before devd is started so the
default route
> from DHCP is never acquired and we wait... for 30s....
> 
> And this needs an "echo" after the
"done" so that the next script's
> output lands up at the start of the next line.

Forgot to add this console log in support:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric
0 mtu 16384
        inet 127.0.0.1 netmask 0xff000000 
vr0: link state changed to UP
vr0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
metric 0 mtu 1500
        options=2808<VLAN_MTU,WOL_UCAST,WOL_MAGIC>
        ether 00:40:63:f4:22:7e
        media: Ethernet autoselect (100baseTX
<full-duplex>)
        status: active
Additional routing options: IP gateway=YES.
Waiting 30s for an interface to come up:
.............................Starting d
evd.
hw.acpi.cpu.cx_lowest: C1 -> C1
DHCPREQUEST on vr0 to 255.255.255.255 port 67
DHCPACK from 10.0.0.1
bound to 10.0.0.223 -- renewal in 216000 seconds.
Firewall rules loaded.

Ian

--
Ian Freislich

_______________________________________________
freebsd-currentfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-curre
nt
To unsubscribe, send any mail to
"freebsd-current-unsubscribefreebsd.org"

Ian FREISLICH пишет:
> Ian FREISLICH wrote:
>> Which is fine and well if routing runs *after* the
DHCP request,
>> but it doesn't it runs before devd is started so
the default route
>> from DHCP is never acquired and we wait... for
30s....
>>
>> And this needs an "echo" after the
"done" so that the next script's
>> output lands up at the start of the next line.
> 
> Forgot to add this console log in support:
> 
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST>
metric 0 mtu 16384
>         inet 127.0.0.1 netmask 0xff000000 
> vr0: link state changed to UP
> vr0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST>
metric 0 mtu 1500
>        
options=2808<VLAN_MTU,WOL_UCAST,WOL_MAGIC>
>         ether 00:40:63:f4:22:7e
>         media: Ethernet autoselect (100baseTX
<full-duplex>)
>         status: active
> Additional routing options: IP gateway=YES.
> Waiting 30s for an interface to come up:
.............................Starting d
> evd.
> hw.acpi.cpu.cx_lowest: C1 -> C1
> DHCPREQUEST on vr0 to 255.255.255.255 port 67
> DHCPACK from 10.0.0.1
> bound to 10.0.0.223 -- renewal in 216000 seconds.
> Firewall rules loaded.
I write about this problem week ago, but - I today sourse
contain this bug.
My desktop cannot get IP when boot, and I manually run
dhclient after 
boot...
_______________________________________________
freebsd-currentfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-curre
nt
To unsubscribe, send any mail to
"freebsd-current-unsubscribefreebsd.org"