List Info

Thread: Dell E521 won't boot FreeBSD
Dell E521 won't boot FreeBSD
user name
 2006-10-05 19:42:33 
Well, it seemed like a good deal -- the new Dell E521 with
an AMD 64 Athlon 
3200+,  1Gb memory, for $400 should make a decent, cheap
server.  But 
FreeBSD just won't boot on it.  I tried Release 6.1 (both
amd64 and i386 
versions), as well as Releases 5.5 and 4.11.  All give the
same result when 
trying to boot from the install cd:

	With the usb keyboard plugged in, the boot gets to a
"panic: 
ohci-add-done: addr 0x3bef1ba0 not found", and then it
tries to reboot again.
	With the keyboard unplugged, the ohci error never appears,
but the boot 
gets to a point of recognizing the SATA drive, and then just
hangs.  Last 
message: "ad4: 152587MB <SAMSUNG HD160JJ/P
ZM100-34> at ata2-master SATA300"

Anyone have any ideas of anything to try?  There's not much
to change in 
the BIOS settings.
Btw, the BIOS is version 1.0.1 (9/23/2006).  The only
version currently 
available on the Dell site is version 1.0.0 (!).

Linux boots and runs fine.  I guess I may have to go with
that.

_______________________________________________
freebsd-hardwarefreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hard
ware
To unsubscribe, send any mail to
"freebsd-hardware-unsubscribefreebsd.org"
Dell E521 won't boot FreeBSD
user name
 2006-10-09 18:56:23 
On Thursday 05 October 2006 15:42, Joel Bradbury wrote:
> Well, it seemed like a good deal -- the new Dell E521
with an AMD 64 Athlon 
> 3200+,  1Gb memory, for $400 should make a decent,
cheap server.  But 
> FreeBSD just won't boot on it.  I tried Release 6.1
(both amd64 and i386 
> versions), as well as Releases 5.5 and 4.11.  All give
the same result when 
> trying to boot from the install cd:
> 
> 	With the usb keyboard plugged in, the boot gets to a
"panic: 
> ohci-add-done: addr 0x3bef1ba0 not found", and
then it tries to reboot again.
> 	With the keyboard unplugged, the ohci error never
appears, but the boot 
> gets to a point of recognizing the SATA drive, and then
just hangs.  Last 
> message: "ad4: 152587MB <SAMSUNG HD160JJ/P
ZM100-34> at ata2-master SATA300"

Did you try the 'Safe Mode' option?

-- 
John Baldwin
_______________________________________________
freebsd-hardwarefreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hard
ware
To unsubscribe, send any mail to
"freebsd-hardware-unsubscribefreebsd.org"
Dell E521 won't boot FreeBSD
user name
 2006-10-17 22:25:04 
Hi,

Your suggestion to try the 'Safe Mode' was very good indeed,
as it
allowed to pass the disk mounting stage.  I found a more
long-term
solution by setting hint.apic.0.disabled=1 in
/boot/loader.conf.

But this is not sufficient to make FreeBSD boot, I also have
to:

* disable the front USB panel, and one of the two rear USB
panels
  in the BIOS otherwise the keyboard and mouse do not work

* unplug the mouse during the boot, otherwise keyboard and
mouse
  do not work.  I plug it in again once entering user-land

Other useful info:

* For the graphics card, I'm satisfied with the
"vesa" driver.
* I was lucky with the netword card as "bfe0" was
detected right
  on install

Things that are not working:

* No sound
* No CD/DVD support

I also  have a very annoying  problem: when I run  Xorg, the
mouse
freezes every 5 minutes,  I have to unplug it.  As  soon as
I plug
it in again, mouse moves freely.  I tried with another
mouse, same
problem.   Restarting  Xorg  does  not  help.   Restarting 
moused
either.

Any  idea to  solve  the  USB mouse  problem  would  be more
 than
helpful.  You will  find attached the dmesg output,  just in
case.
I've heard about a [1]USB patch, do you think it can be
useful for
my problem?

        Note: I  was using  FreeBSD 6.1-RELEASE,  and
upgraded  to
        6.2-PRERELEASE (checked out from RELENG_6) but that
didn't
        change anything.

Thanks in advance,
-- 
     Jean-Baptiste Quenot
aka  John Banana Qwerty
http://caraldi.com/jbq/

[1] http://pe
ople.freebsd.org/~iedowse/usb.diff
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
	The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Sat Oct 14 18:12:52 CEST 2006
    jbqzoupla.cottages:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3800+ (2405.03-MHz K8-class
CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping
= 2
 
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,API
C,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2&
gt;
  Features2=0x2001<SSE3,CX16>
  AMD
Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow
+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 1005453312 (958 MB)
avail memory = 959361024 (914 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413)
acpi0: <DELL bMk    > on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <display, VGA> at device 5.0 (no driver
attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver
attached)
pci0: <memory, RAM> at device 10.2 (no driver
attached)
ohci0: <OHCI (generic) USB controller> mem
0xfe02f000-0xfe02ffff irq 15 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr
1
uhub0: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem
0xfe02e000-0xfe02e0ff irq 7 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr
1
uhub1: 4 ports with 4 removable, self powered
atapci0: <nVidia nForce MCP51 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00
f mem 0xfe02d000-0xfe02dfff irq 11 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0
f mem 0xfe02c000-0xfe02cfff irq 10 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem
0xfdbfe000-0xfdbfffff irq 5 at device 7.0 on pci4
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
bfe0: Ethernet address: 00:13:72:33:1e:42
pci0: <multimedia> at device 16.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
uhub0: device problem (SET_ADDR_FAILED), disabling port 4
Timecounter "TSC" frequency 2405033974 Hz quality
800
Timecounters tick every 1.000 msec
ad4: 238418MB <Seagate ST3250824AS 3.ADH> at
ata2-master SATA300
Trying to mount root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Waiting (max 60 seconds) for system process `vnlru' to
stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to
stop...done
Waiting (max 60 seconds) for system process `syncer' to
stop...
Syncing disks, vnodes remaining...8 5 5 3 1 0 0 done
All buffers synced.
Uptime: 28s
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Powering system off using ACPI
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
	The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Sat Oct 14 18:12:52 CEST 2006
    jbqzoupla.cottages:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3800+ (2405.03-MHz K8-class
CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping
= 2
 
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,API
C,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2&
gt;
  Features2=0x2001<SSE3,CX16>
  AMD
Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow
+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 1005453312 (958 MB)
avail memory = 959361024 (914 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413)
acpi0: <DELL bMk    > on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <display, VGA> at device 5.0 (no driver
attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver
attached)
pci0: <memory, RAM> at device 10.2 (no driver
attached)
ohci0: <OHCI (generic) USB controller> mem
0xfe02f000-0xfe02ffff irq 15 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr
1
uhub0: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem
0xfe02e000-0xfe02e0ff irq 7 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr
1
uhub1: 4 ports with 4 removable, self powered
atapci0: <nVidia nForce MCP51 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00
f mem 0xfe02d000-0xfe02dfff irq 11 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0
f mem 0xfe02c000-0xfe02cfff irq 10 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem
0xfdbfe000-0xfdbfffff irq 5 at device 7.0 on pci4
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
bfe0: Ethernet address: 00:13:72:33:1e:42
pci0: <multimedia> at device 16.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
ukbd0: DELL DELL USB Keyboard, rev 1.10/1.05, addr 2, iclass
3/1
kbd0 at ukbd0
Timecounter "TSC" frequency 2405031978 Hz quality
800
Timecounters tick every 1.000 msec
ad4: 238418MB <Seagate ST3250824AS 3.ADH> at
ata2-master SATA300
Trying to mount root from ufs:/dev/ad4s1a
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
pid 2289 (muttng), uid 1001: exited on signal 11 (core
dumped)
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
pid 2262 (gaim), uid 1001: exited on signal 6 (core dumped)
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
Waiting (max 60 seconds) for system process `vnlru' to
stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to
stop...done
Waiting (max 60 seconds) for system process `syncer' to
stop...
Syncing disks, vnodes remaining...4 2 3 1 0 0 done
All buffers synced.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
	The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Sun Oct 15 22:48:24 CEST 2006
    jbqzoupla.cottages:/usr/obj/usr/src/sys/ZOUPLA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3800+ (2405.03-MHz K8-class
CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping
= 2
 
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,API
C,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2&
gt;
  Features2=0x2001<SSE3,CX16>
  AMD
Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow
+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 1005453312 (958 MB)
avail memory = 958681088 (914 MB)
kbd1 at kbdmux0
acpi0: <DELL bMk    > on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <display, VGA> at device 5.0 (no driver
attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver
attached)
pci0: <memory, RAM> at device 10.2 (no driver
attached)
ohci0: <OHCI (generic) USB controller> mem
0xfe02f000-0xfe02ffff irq 15 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr
1
uhub0: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 11.1 (no driver
attached)
atapci0: <nVidia nForce MCP51 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00
f mem 0xfe02d000-0xfe02dfff irq 11 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0
f mem 0xfe02c000-0xfe02cfff irq 10 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem
0xfdbfe000-0xfdbfffff irq 5 at device 7.0 on pci4
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
bfe0: Ethernet address: 00:13:72:33:1e:42
pci0: <multimedia> at device 16.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
uhub0: device problem (SET_ADDR_FAILED), disabling port 4
Timecounter "TSC" frequency 2405029908 Hz quality
800
Timecounters tick every 1.000 msec
ad4: 238418MB <Seagate ST3250824AS 3.ADH> at
ata2-master SATA300
Trying to mount root from ufs:/dev/ad4s1a
Waiting (max 60 seconds) for system process `vnlru' to
stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to
stop...done
Waiting (max 60 seconds) for system process `syncer' to
stop...
Syncing disks, vnodes remaining...8 5 4 3 2 0 0 done
All buffers synced.
Uptime: 24s
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Powering system off using ACPI
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
	The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #0: Sun Oct 15 22:48:24 CEST 2006
    jbqzoupla.cottages:/usr/obj/usr/src/sys/ZOUPLA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3800+ (2405.03-MHz K8-class
CPU)
  Origin = "AuthenticAMD"  Id = 0x40ff2  Stepping
= 2
 
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,API
C,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2&
gt;
  Features2=0x2001<SSE3,CX16>
  AMD
Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow
+,3DNow>
  AMD Features2=0x1d<LAHF,<b2>,<b3>,CR8>
real memory  = 1005453312 (958 MB)
avail memory = 958681088 (914 MB)
kbd1 at kbdmux0
acpi0: <DELL bMk    > on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <display, VGA> at device 5.0 (no driver
attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver
attached)
pci0: <memory, RAM> at device 10.2 (no driver
attached)
ohci0: <OHCI (generic) USB controller> mem
0xfe02f000-0xfe02ffff irq 15 at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr
1
uhub0: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 11.1 (no driver
attached)
atapci0: <nVidia nForce MCP51 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00
f mem 0xfe02d000-0xfe02dfff irq 11 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0
f mem 0xfe02c000-0xfe02cfff irq 10 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem
0xfdbfe000-0xfdbfffff irq 5 at device 7.0 on pci4
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
bfe0: Ethernet address: 00:13:72:33:1e:42
pci0: <multimedia> at device 16.1 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
device_attach: atkbd0 attach returned 6
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
ukbd0: DELL DELL USB Keyboard, rev 1.10/1.05, addr 2, iclass
3/1
kbd0 at ukbd0
Timecounter "TSC" frequency 2405028042 Hz quality
800
Timecounters tick every 1.000 msec
ad4: 238418MB <Seagate ST3250824AS 3.ADH> at
ata2-master SATA300
Trying to mount root from ufs:/dev/ad4s1a
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
pid 1664 (gaim), uid 1001: exited on signal 6 (core dumped)
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
stray irq7
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
stray irq7
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech M4848, rev 1.00/5.00, addr 3, iclass 3/1
ums0: 1 buttons.
ums0: at uhub0 port 3 (addr 3) disconnected
ums0: detached
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 3,
iclass 3/1
ums0: 3 buttons and Z dir.
too many stray irq 7's: not logging anymore
_______________________________________________
freebsd-hardwarefreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hard
ware
To unsubscribe, send any mail to
"freebsd-hardware-unsubscribefreebsd.org"
Dell E521 won't boot FreeBSD
user name
 2006-10-19 14:14:32 
On Tuesday 17 October 2006 18:25, Jean-Baptiste Quenot
wrote:
> Hi,
> 
> Your suggestion to try the 'Safe Mode' was very good
indeed, as it
> allowed to pass the disk mounting stage.  I found a
more long-term
> solution by setting hint.apic.0.disabled=1 in
/boot/loader.conf.
> 
> But this is not sufficient to make FreeBSD boot, I also
have to:
> 
> * disable the front USB panel, and one of the two rear
USB panels
>   in the BIOS otherwise the keyboard and mouse do not
work
> 
> * unplug the mouse during the boot, otherwise keyboard
and mouse
>   do not work.  I plug it in again once entering
user-land

Weird, I've no idea what would cause that, though it might
be a problem in the 
USB drivers.  You could certainly ask on the freebsd-usb mailing
list about 
the USB stuff.

-- 
John Baldwin
_______________________________________________
freebsd-hardwarefreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hard
ware
To unsubscribe, send any mail to
"freebsd-hardware-unsubscribefreebsd.org"
[1-4]

about | contact  Other archives ( Real Estate discussion Medical topics )