dl320 hungs while resetting iLO2.

Hello, list.
I have a dl320 g5 with fresh install FreeBSD 6.2.
Its hungs, after saving iLO settings. 

How-To-Repeat:
Enter to iLO bios(F8) while booting, open 'Network'->'NIC
and TCP/IP',
press F10 to save settings, you'll see "iLO2 will be
reset upon
exiting setup" at the bottom of the screen, and exit
bios.

While its resetting(somewhere in the middle of system boot)
system hungs.

What can I do with this?

Roman.



_______________________________________________
freebsd-proliantfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-prol
iant
To unsubscribe, send any mail to
"freebsd-proliant-unsubscribefreebsd.org"

Roman Gorohov wrote:
> Hello, list.
> I have a dl320 g5 with fresh install FreeBSD 6.2.
> Its hungs, after saving iLO settings. 
> 
> How-To-Repeat:
> Enter to iLO bios(F8) while booting, open
'Network'->'NIC and TCP/IP',
> press F10 to save settings, you'll see "iLO2 will
be reset upon
> exiting setup" at the bottom of the screen, and
exit bios.
> 
> While its resetting(somewhere in the middle of system
boot) system hungs.
> 
> What can I do with this?

Contact HP?

If I read the above correct, you are nowwhere near FreeBSD
when the hang 
occurs? Perhaps you mistyped somethingin the iLO setup?

If it DOES occur while FreeBSD is booting I think you need
to provide 
more info than this to the list...

Rgds,
Per olof
_______________________________________________
freebsd-proliantfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-prol
iant
To unsubscribe, send any mail to
"freebsd-proliant-unsubscribefreebsd.org"