|
List Info
Thread: Problems with USB on CURRENT
|
|
| Problems with USB on CURRENT |
|
2006-09-24 11:32:04 |
Hi, All!
I have notebook Maxselect Mission GT3000.
A hardware configuration description (russian):
http://www.maxselect.ru/catalog/models.ht
ml?id=4024&template=normal
o Mobile AMD Sempron
o NVIDIA C51MV+MCP51M
o PCI Express nVidia Geforce Go 6100
o Realtek HDA
I have several problems. One is with USB.
When i attach USB Flash disk it's not work.
usbd_new_device: addr=2, getting first desc failed
uhub_explore: usb_new_device failed, error=IOERROR
uhub1: device problem (IOERROR), disabling port 4
http://butcher.
heavennet.ru/dmesg.txt
http://butche
r.heavennet.ru/pciconf.txt
I've attached dmesg and pciconf.
Any suggestions?
--
WBR, Andrey V. Elsukov
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 7.0-CURRENT #2: Sun Sep 24 15:03:02 MSD 2006
butcher btr-nb.properlan.net:/usr/obj/usr/src/sys/BTR
Preloaded elf kernel "/boot/kernel/kernel" at
0xc0dae000.
Preloaded elf module "/boot/kernel/linux.ko" at
0xc0dae1c4.
Preloaded elf module "/boot/modules/nvidia.ko" at
0xc0dae270.
Preloaded elf module "/boot/kernel/acpi.ko" at
0xc0dae31c.
Calibrating clock(s) ... i8254 clock: 1193216 Hz
CLK_USE_I8254_CALIBRATION not specified - using default
frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1607325121 Hz
CPU: Mobile AMD Sempron(tm) Processor 2600+ (1607.33-MHz
686-class CPU)
Origin = "AuthenticAMD" Id = 0xf82 Stepping =
2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,API
C,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2&
gt;
AMD
Features=0xc0500800<SYSCALL,NX,MMX+,3DNow!+,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag,
2-way associative
L2 internal cache: 128 kbytes, 64 bytes/line, 1 lines/tag,
8-way associative
real memory = 468844544 (447 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157
pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768
pages)
0x0000000001025000 - 0x000000001b6fffff, 443396096 bytes
(108251 pages)
avail memory = 445120512 (424 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f8390
bios32: Entry = 0xfdce4 (c00fdce4) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfdce0+0x0
pnpbios: Found PnP BIOS data at 0xc00f8420
pnpbios: Entry = e9cd:86af Rev = 1.0
Other BIOS signatures found:
ath_rate: version 1.2 <SampleRate bit-rate selection
algorithm>
wlan: <802.11 Link Layer>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413)
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80007004
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=050000] [hdr=80] is there
(id=02f310de)
pcibios: BIOS_PRESENT call failed
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xcb3c4000 pa 0x9d000
atpic: Programming IRQ9 as level/low
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 10 func 1
ACPI timer: 1/2 1/2 1/2 1/1 1/1 1/2 1/1 1/2 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port
0x62,0x66 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 7 9 11 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 7 9 11 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 9 11 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 9 11 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 5 7 9 11 14 15
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link9: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 7 9 11 14 15
pci_link9: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 7 9 11 14 15
pci_link9: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link10: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 5 7 9 11 14 15
pci_link10: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link10: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link11: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 5 7 9 11 14 15
pci_link11: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link11: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link12: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link12: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link12: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link13: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link13: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link13: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link14: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link14: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link14: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link15: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link15: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link15: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link16: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 7 9 11 14 15
pci_link16: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 7 9 11 14 15
pci_link16: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link17: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link17: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
pci_link17: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 9 11 14 15
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
ACPI: Found matching pin for 0.10.INTA at func 1: 10
pci_link8: BIOS IRQ 10 for 0.10.INTA is invalid
ACPI: Found matching pin for 0.11.INTA at func 0: 11
ACPI: Found matching pin for 0.11.INTB at func 1: 10
pci_link10: BIOS IRQ 10 for 0.11.INTB is invalid
ACPI: Found matching pin for 0.20.INTA at func 0: 10
pci_link11: BIOS IRQ 10 for 0.20.INTA is invalid
ACPI: Found matching pin for 0.16.INTB at func 1: 11
ACPI: Found matching pin for 0.14.INTA at func 0: 7
ACPI: Found matching pin for 0.5.INTA at func 0: 5
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x10de, dev=0x02f3, revid=0xa2
bus=0, slot=0, func=0
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x10de, dev=0x02fa, revid=0xa2
bus=0, slot=0, func=1
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x10de, dev=0x02fe, revid=0xa2
bus=0, slot=0, func=2
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x10de, dev=0x02f8, revid=0xa2
bus=0, slot=0, func=3
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x10de, dev=0x02f9, revid=0xa2
bus=0, slot=0, func=4
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x10de, dev=0x02ff, revid=0xa2
bus=0, slot=0, func=5
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x10de, dev=0x027f, revid=0xa2
bus=0, slot=0, func=6
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0100, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x10de, dev=0x027e, revid=0xa2
bus=0, slot=0, func=7
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x10de, dev=0x0247, revid=0xa2
bus=0, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base c2000000, size 24, enabled
map[14]: type 3, range 64, base d0000000, size 28, enabled
map[1c]: type 1, range 64, base c1000000, size 24, enabled
pcib0: matched entry for 0.5.INTA (src \_SB_.PCI0.LK3E:0)
pcib0: slot 5 INTA routed to irq 5 via \_SB_.PCI0.LK3E
found-> vendor=0x10de, dev=0x0270, revid=0xa2
bus=0, slot=9, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x10de, dev=0x0260, revid=0xa3
bus=0, slot=10, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x10de, dev=0x0264, revid=0xa3
bus=0, slot=10, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00003040, size 6, enabled
map[24]: type 4, range 32, base 00003000, size 6, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.LSMB:0)
pci_link8: Picked IRQ 7 with weight 0
pcib0: slot 10 INTA routed to irq 7 via \_SB_.PCI0.LSMB
found-> vendor=0x10de, dev=0x026d, revid=0xa3
bus=0, slot=11, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01
(250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c0004000, size 12, enabled
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LUS0:0)
pcib0: slot 11 INTA routed to irq 11 via \_SB_.PCI0.LUS0
found-> vendor=0x10de, dev=0x026e, revid=0xa3
bus=0, slot=11, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01
(250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c0005000, size 8, enabled
pcib0: matched entry for 0.11.INTB (src \_SB_.PCI0.LUS2:0)
pci_link10: Picked IRQ 9 with weight 0
pcib0: slot 11 INTB routed to irq 9 via \_SB_.PCI0.LUS2
found-> vendor=0x10de, dev=0x0265, revid=0xa1
bus=0, slot=13, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01
(250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00003080, size 4, enabled
found-> vendor=0x10de, dev=0x0266, revid=0xa1
bus=0, slot=14, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01
(250 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type 4, range 32, base 000030b0, size 3, enabled
map[14]: type 4, range 32, base 000030a4, size 2, enabled
map[18]: type 4, range 32, base 000030a8, size 3, enabled
map[1c]: type 4, range 32, base 000030a0, size 2, enabled
map[20]: type 4, range 32, base 00003090, size 4, enabled
map[24]: type 1, range 32, base c0006000, size 12, memory
disabled
pcib0: matched entry for 0.14.INTA (src \_SB_.PCI0.LTID:0)
pcib0: slot 14 INTA routed to irq 7 via \_SB_.PCI0.LTID
found-> vendor=0x10de, dev=0x026f, revid=0xa2
bus=0, slot=16, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02
(500 ns)
found-> vendor=0x10de, dev=0x026c, revid=0xa2
bus=0, slot=16, func=1
class=04-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05
(1250 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
map[10]: type 1, range 32, base c0000000, size 14, enabled
pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.LAZA:0)
pcib0: slot 16 INTB routed to irq 11 via \_SB_.PCI0.LAZA
found-> vendor=0x10de, dev=0x0269, revid=0xa3
bus=0, slot=20, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14
(5000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c0007000, size 12, enabled
map[14]: type 4, range 32, base 000030b8, size 3, enabled
pcib0: matched entry for 0.20.INTA (src \_SB_.PCI0.LMAC:0)
pci_link11: Picked IRQ 5 with weight 1
pcib0: slot 20 INTA routed to irq 5 via \_SB_.PCI0.LMAC
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
nvidia0: <GeForce Go 6100> mem
0xc2000000-0xc2ffffff,0xd0000000-0xdfffffff,0xc1000000-0xc1f
fffff irq 5 at device 5.0 on pci0
nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at
0xc2000000
nvidia0: Reserved 0x10000000 bytes for rid 0x14 type 3 at
0xd0000000
nvidia0: Reserved 0x1000000 bytes for rid 0x1c type 3 at
0xc1000000
nvidia0: [GIANT-LOCKED]
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
nfsmb0: <nForce2/3/4 MCP SMBus Controller> port
0x3040-0x307f,0x3000-0x303f irq 7 at device 10.1 on pci0
nfsmb0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3040
smbus0: <System Management Bus> on nfsmb0
smb0: <SMBus generic I/O> on smbus0
nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0
nfsmb0: Reserved 0x40 bytes for rid 0x24 type 4 at 0x3000
smbus1: <System Management Bus> on nfsmb1
smb1: <SMBus generic I/O> on smbus1
ohci0: <OHCI (generic) USB controller> mem
0xc0004000-0xc0004fff irq 11 at device 11.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at
0xc0004000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00,
addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem
0xc0005000-0xc00050ff irq 9 at device 11.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at
0xc0005000
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
usbd_new_device: addr=2, getting first desc failed
uhub_explore: usb_new_device failed, error=IOERROR
uhub1: device problem (IOERROR), disabling port 8
atapci0: <nVidia nForce MCP51 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device
13.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3080
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=01
devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x30b0-0x30b7,0x30a4-0x30a7,0x30a8-0x30af,0x30a0-0x30a3,0x30
90-0x309f mem 0xc0006000-0xc0006fff irq 7 at device 14.0 on
pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3090
atapci1: [MPSAFE]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at
0xc0006000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30b0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30a4
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30a8
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30a0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
pcib1: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pcib1: secondary bus 4
pcib1: subordinate bus 5
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xc3000000-0xc30fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: Subtractively decoded bridge.
ACPI: Found matching pin for 4.7.INTA at func 0: 10
pci_link0: BIOS IRQ 10 for 4.7.INTA is invalid
ACPI: Found matching pin for 4.7.INTB at func 1: 11
pci4: <ACPI PCI bus> on pcib1
pci4: physical bus=4
found-> vendor=0x1524, dev=0x1412, revid=0x10
bus=4, slot=7, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0104, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x44 (17000 ns),
maxlat=0x03 (750 ns)
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c3000000, size 12, memory
disabled
pcib1: (null) requested memory range 0xc3000000-0xc3000fff:
good
pcib1: matched entry for 4.7.INTA (src \_SB_.PCI0.LNK1:0)
pci_link0: Picked IRQ 9 with weight 1
pcib1: slot 7 INTA routed to irq 9 via \_SB_.PCI0.LNK1
found-> vendor=0x1524, dev=0x0530, revid=0x01
bus=4, slot=7, func=1
class=05-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x04
(1000 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c3001000, size 7, enabled
pcib1: (null) requested memory range 0xc3001000-0xc300107f:
good
pcib1: matched entry for 4.7.INTB (src \_SB_.PCI0.LNK2:0)
pcib1: slot 7 INTB routed to irq 11 via \_SB_.PCI0.LNK2
found-> vendor=0x1524, dev=0x0550, revid=0x01
bus=4, slot=7, func=2
class=08-05-01, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x48
(18000 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c3001400, size 8, enabled
pcib1: (null) requested memory range 0xc3001400-0xc30014ff:
good
pcib1: matched entry for 4.7.INTB (src \_SB_.PCI0.LNK2:0)
pcib1: slot 7 INTB routed to irq 11 via \_SB_.PCI0.LNK2
found-> vendor=0x1524, dev=0x0551, revid=0x01
bus=4, slot=7, func=4
class=05-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0104, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x48
(18000 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 8, memory
disabled
cbb0: <PCI-CardBus Bridge> mem 0xc3000000-0xc3000fff
irq 9 at device 7.0 on pci4
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at
0xc3000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x14121524 0x02100107 0x06070010 0x00824010
0x10: 0xc3000000 0x020000a0 0x20050504 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07440109
0x40: 0x54031558 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0040d020 0x00000000 0x00000000 0x01d11222
0x90: 0x604400c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe010001 0x00c00000 0x00000018 0x00000007
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00001003 0x00800080 0x10080700 0x000007fe
0xd0: 0x00000020 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci4: <memory, flash> at device 7.1 (no driver
attached)
pci4: <base peripheral> at device 7.2 (no driver
attached)
pci4: <memory, flash> at device 7.4 (no driver
attached)
pci0: <multimedia> at device 16.1 (no driver attached)
nve0: <NVIDIA nForce MCP13 Networking Adapter> port
0x30b8-0x30bf mem 0xc0007000-0xc0007fff irq 5 at device 20.0
on pci0
nve0: nvenetlib.o version 1.0-13
nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at
0xc0007000
nve0: Ethernet address 00:90:f5:4f:18:1b
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto
nve0: bpf attached
nve0: Ethernet address: 00:90:f5:4f:18:1b
nve0: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (154.8C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64
irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0xe01 0xe11 0xe01 0xe01
sio0: irq maps: 0xe01 0xe11 0xe01 0xe01
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff
irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FAST]
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcefff,0xcf000-0xd07ff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xe01 0xe01 0xe01 0xe01
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1607325121 Hz quality
800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
acpi_tz0: _CRT value is absurd, ignored (154.8C)
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery0: battery initialization done, tried 1 times
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on nForce MCP51 chip
acd0: setting UDMA33 on nForce MCP51 chip
acd0: <TSSTcorpCD/DVDW SN-S082D/SS00> DVDR drive at
ata1 as master
acd0: read 4134KB/s (4134KB/s) write 172KB/s (4134KB/s),
2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM,
packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 76319MB <FUJITSU MHV2080BH 00000028> at
ata2-master SATA150
ad4: 156301488 sectors [155061C/16H/63S] 16
sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
linprocfs registered
acpi_tz0: _CRT value is absurd, ignored (154.8C)
acpi_tz0: _CRT value is absurd, ignored (154.8C)
usbd_new_device: addr=2, getting first desc failed
uhub_explore: usb_new_device failed, error=IOERROR
uhub1: device problem (IOERROR), disabling port 4
none0pci0:0:0: class=0x050000 card=0x00000000
chip=0x02f310de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = memory
subclass = RAM
none1pci0:0:1: class=0x050000 card=0x00000000
chip=0x02fa10de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = memory
subclass = RAM
none2pci0:0:2: class=0x050000 card=0x00000000
chip=0x02fe10de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = memory
subclass = RAM
none3pci0:0:3: class=0x050000 card=0x00000000
chip=0x02f810de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = memory
subclass = RAM
none4pci0:0:4: class=0x050000 card=0x00000000
chip=0x02f910de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = memory
subclass = RAM
none5pci0:0:5: class=0x050000 card=0x00000000
chip=0x02ff10de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = memory
subclass = RAM
none6pci0:0:6: class=0x050000 card=0x00000000
chip=0x027f10de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = memory
subclass = RAM
none7pci0:0:7: class=0x050000 card=0x00000000
chip=0x027e10de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = memory
subclass = RAM
nvidia0pci0:5:0: class=0x030000 card=0x54031558
chip=0x024710de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = display
subclass = VGA
none8pci0:9:0: class=0x050000 card=0xcb8410de
chip=0x027010de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = memory
subclass = RAM
isab0pci0:10:0: class=0x060100 card=0x54031558
chip=0x026010de rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
class = bridge
subclass = PCI-ISA
nfsmb0pci0:10:1: class=0x0c0500 card=0x54031558
chip=0x026410de rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
class = serial bus
subclass = SMBus
ohci0pci0:11:0: class=0x0c0310 card=0x54031558
chip=0x026d10de rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
class = serial bus
subclass = USB
ehci0pci0:11:1: class=0x0c0320 card=0x54031558
chip=0x026e10de rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
class = serial bus
subclass = USB
atapci0pci0:13:0: class=0x01018a card=0x54031558
chip=0x026510de rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
class = mass storage
subclass = ATA
atapci1pci0:14:0: class=0x010185 card=0x54031558
chip=0x026610de rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
class = mass storage
subclass = ATA
pcib1pci0:16:0: class=0x060401 card=0x000000b8
chip=0x026f10de rev=0xa2 hdr=0x01
vendor = 'NVIDIA Corporation'
class = bridge
subclass = PCI-PCI
pcm0pci0:16:1: class=0x040300 card=0x54031558
chip=0x026c10de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = multimedia
nve0pci0:20:0: class=0x068000 card=0x54031558
chip=0x026910de rev=0xa3 hdr=0x00
vendor = 'NVIDIA Corporation'
class = bridge
hostb0pci0:24:0: class=0x060000 card=0x00000000
chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron HyperTransport
Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb1pci0:24:1: class=0x060000 card=0x00000000
chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Address Map'
class = bridge
subclass = HOST-PCI
hostb2pci0:24:2: class=0x060000 card=0x00000000
chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb3pci0:24:3: class=0x060000 card=0x00000000
chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = 'Athlon 64 / Opteron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
cbb0pci4:7:0: class=0x060700 card=0x54031558
chip=0x14121524 rev=0x10 hdr=0x02
vendor = 'ENE Technology Inc'
device = 'CB-712/714 CardBus Controller'
class = bridge
subclass = PCI-CardBus
none9pci4:7:1: class=0x050100 card=0x54031558
chip=0x05301524 rev=0x01 hdr=0x00
vendor = 'ENE Technology Inc'
class = memory
subclass = flash
none10pci4:7:2: class=0x080501 card=0x54031558
chip=0x05501524 rev=0x01 hdr=0x00
vendor = 'ENE Technology Inc'
class = base peripheral
none11pci4:7:4: class=0x050100 card=0x54031558
chip=0x05511524 rev=0x01 hdr=0x00
vendor = 'ENE Technology Inc'
class = memory
subclass = flash
_______________________________________________
freebsd-usbfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to
"freebsd-usb-unsubscribefreebsd.org"
|
|
| Problems with USB on CURRENT |
|
2006-09-24 15:36:19 |
Andrey V. Elsukov wrote:
> Hi, All!
>
> I have notebook Maxselect Mission GT3000.
> A hardware configuration description (russian):
> http://www.maxselect.ru/catalog/models.ht
ml?id=4024&template=normal
>
> o Mobile AMD Sempron
> o NVIDIA C51MV+MCP51M
> o PCI Express nVidia Geforce Go 6100
> o Realtek HDA
>
> I have several problems. One is with USB.
> When i attach USB Flash disk it's not work.
>
> usbd_new_device: addr=2, getting first desc failed
> uhub_explore: usb_new_device failed, error=IOERROR
> uhub1: device problem (IOERROR), disabling port 4
>
> http://butcher.
heavennet.ru/dmesg.txt
> http://butche
r.heavennet.ru/pciconf.txt
> I've attached dmesg and pciconf.
> Any suggestions?
>
>
------------------------------------------------------------
------------
>
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
> The Regents of the University of California. All
rights reserved.
> FreeBSD 7.0-CURRENT #2: Sun Sep 24 15:03:02 MSD 2006
> butcherbtr-nb.properlan.net:/usr/obj/usr/src/sys/BTR
> Preloaded elf kernel "/boot/kernel/kernel" at
0xc0dae000.
> Preloaded elf module "/boot/kernel/linux.ko"
at 0xc0dae1c4.
> Preloaded elf module
"/boot/modules/nvidia.ko" at 0xc0dae270.
> Preloaded elf module "/boot/kernel/acpi.ko"
at 0xc0dae31c.
> Calibrating clock(s) ... i8254 clock: 1193216 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default
frequency
> Timecounter "i8254" frequency 1193182 Hz
quality 0
> Calibrating TSC clock ... TSC clock: 1607325121 Hz
> CPU: Mobile AMD Sempron(tm) Processor 2600+
(1607.33-MHz 686-class CPU)
> Origin = "AuthenticAMD" Id = 0xf82
Stepping = 2
>
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,API
C,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2&
gt;
> AMD
Features=0xc0500800<SYSCALL,NX,MMX+,3DNow!+,3DNow!>
> Data TLB: 32 entries, fully associative
> Instruction TLB: 32 entries, fully associative
> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag,
2-way associative
> L1 instruction cache: 64 kbytes, 64 bytes/line, 1
lines/tag, 2-way associative
> L2 internal cache: 128 kbytes, 64 bytes/line, 1
lines/tag, 8-way associative
> real memory = 468844544 (447 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009dfff, 643072 bytes
(157 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes
(768 pages)
> 0x0000000001025000 - 0x000000001b6fffff, 443396096
bytes (108251 pages)
> avail memory = 445120512 (424 MB)
> bios32: Found BIOS32 Service Directory header at
0xc00f8390
> bios32: Entry = 0xfdce4 (c00fdce4) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0xfdce0+0x0
> pnpbios: Found PnP BIOS data at 0xc00f8420
> pnpbios: Entry = e9cd:86af Rev = 1.0
> Other BIOS signatures found:
> ath_rate: version 1.2 <SampleRate bit-rate selection
algorithm>
> wlan: <802.11 Link Layer>
> nfslock: pseudo-device
> kbd: new array size 4
> kbd1 at kbdmux0
> mem: <memory>
> Pentium Pro MTRR support enabled
> io: <I/O>
> null: <null device, zero device>
> random: <entropy source, Software, Yarrow>
> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111,
RF5112, RF2413, RF5413)
> npx0: INT 16 interface
> acpi0: <PTLTD RSDT> on motherboard
> acpi0: [MPSAFE]
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80007004
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=050000] [hdr=80] is there
(id=02f310de)
> pcibios: BIOS_PRESENT call failed
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 10 func 0
> acpi0: Power Button (fixed)
> acpi0: wakeup code va 0xcb3c4000 pa 0x9d000
> atpic: Programming IRQ9 as level/low
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 10 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 10 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 10 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 10 func 0
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 10 func 1
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 10 func 1
> acpi_bus_number: root bus has no _BBN, assuming 0
> AcpiOsDerivePciId: bus 0 dev 10 func 1
> ACPI timer: 1/2 1/2 1/2 1/1 1/1 1/2 1/1 1/2 1/1 1/1
-> 10
> Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port
0x1008-0x100b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x10> port
0x62,0x66 on acpi0
> pci_link0: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link0: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link0: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link1: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 11 N 0 5 7 9 11 14 15
> pci_link1: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 11 N 0 5 7 9 11 14 15
> pci_link1: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link2: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link2: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link2: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link3: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link3: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link3: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link4: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link4: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link4: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link5: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link5: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link5: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link6: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 5 N 0 5 7 9 11 14 15
> pci_link6: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 5 N 0 5 7 9 11 14 15
> pci_link6: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link7: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link7: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link7: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link8: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 10 N 0 5 7 9 11 14 15
> pci_link8: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link8: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link9: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 11 N 0 5 7 9 11 14 15
> pci_link9: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 11 N 0 5 7 9 11 14 15
> pci_link9: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link10: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 10 N 0 5 7 9 11 14 15
> pci_link10: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link10: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link11: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 10 N 0 5 7 9 11 14 15
> pci_link11: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link11: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link12: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link12: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link12: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link13: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link13: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link13: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link14: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link14: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link14: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link15: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link15: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link15: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link16: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 7 N 0 5 7 9 11 14 15
> pci_link16: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 7 N 0 5 7 9 11 14 15
> pci_link16: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link17: Links after initial probe:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link17: Links after initial validation:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> pci_link17: Links after disable:
> Index IRQ Rtd Ref IRQs
> 0 255 N 0 5 7 9 11 14 15
> cpu0: <ACPI CPU> on acpi0
> powernow0: <PowerNow! K8> on cpu0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
> ACPI: Found matching pin for 0.10.INTA at func 1: 10
> pci_link8: BIOS IRQ 10 for 0.10.INTA is invalid
> ACPI: Found matching pin for 0.11.INTA at func 0: 11
> ACPI: Found matching pin for 0.11.INTB at func 1: 10
> pci_link10: BIOS IRQ 10 for 0.11.INTB is invalid
> ACPI: Found matching pin for 0.20.INTA at func 0: 10
> pci_link11: BIOS IRQ 10 for 0.20.INTA is invalid
> ACPI: Found matching pin for 0.16.INTB at func 1: 11
> ACPI: Found matching pin for 0.14.INTA at func 0: 7
> ACPI: Found matching pin for 0.5.INTA at func 0: 5
> pci0: <ACPI PCI bus> on pcib0
> pci0: physical bus=0
> found-> vendor=0x10de, dev=0x02f3, revid=0xa2
> bus=0, slot=0, func=0
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x10de, dev=0x02fa, revid=0xa2
> bus=0, slot=0, func=1
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x10de, dev=0x02fe, revid=0xa2
> bus=0, slot=0, func=2
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x10de, dev=0x02f8, revid=0xa2
> bus=0, slot=0, func=3
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x10de, dev=0x02f9, revid=0xa2
> bus=0, slot=0, func=4
> class=05-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x10de, dev=0x02ff, revid=0xa2
> bus=0, slot=0, func=5
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x10de, dev=0x027f, revid=0xa2
> bus=0, slot=0, func=6
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0100, statreg=0x0020, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x10de, dev=0x027e, revid=0xa2
> bus=0, slot=0, func=7
> class=05-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x10de, dev=0x0247, revid=0xa2
> bus=0, slot=5, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> intpin=a, irq=5
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type 1, range 32, base c2000000, size 24,
enabled
> map[14]: type 3, range 64, base d0000000, size 28,
enabled
> map[1c]: type 1, range 64, base c1000000, size 24,
enabled
> pcib0: matched entry for 0.5.INTA (src
\_SB_.PCI0.LK3E:0)
> pcib0: slot 5 INTA routed to irq 5 via \_SB_.PCI0.LK3E
> found-> vendor=0x10de, dev=0x0270, revid=0xa2
> bus=0, slot=9, func=0
> class=05-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x10de, dev=0x0260, revid=0xa3
> bus=0, slot=10, func=0
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x10de, dev=0x0264, revid=0xa3
> bus=0, slot=10, func=1
> class=0c-05-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D3 current D0
> map[20]: type 4, range 32, base 00003040, size 6,
enabled
> map[24]: type 4, range 32, base 00003000, size 6,
enabled
> pcib0: matched entry for 0.10.INTA (src
\_SB_.PCI0.LSMB:0)
> pci_link8: Picked IRQ 7 with weight 0
> pcib0: slot 10 INTA routed to irq 7 via
\_SB_.PCI0.LSMB
> found-> vendor=0x10de, dev=0x026d, revid=0xa3
> bus=0, slot=11, func=0
> class=0c-03-10, hdrtype=0x00, mfdev=1
> cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns),
maxlat=0x01 (250 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base c0004000, size 12,
enabled
> pcib0: matched entry for 0.11.INTA (src
\_SB_.PCI0.LUS0:0)
> pcib0: slot 11 INTA routed to irq 11 via
\_SB_.PCI0.LUS0
> found-> vendor=0x10de, dev=0x026e, revid=0xa3
> bus=0, slot=11, func=1
> class=0c-03-20, hdrtype=0x00, mfdev=1
> cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns),
maxlat=0x01 (250 ns)
> intpin=b, irq=10
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base c0005000, size 8,
enabled
> pcib0: matched entry for 0.11.INTB (src
\_SB_.PCI0.LUS2:0)
> pci_link10: Picked IRQ 9 with weight 0
> pcib0: slot 11 INTB routed to irq 9 via
\_SB_.PCI0.LUS2
> found-> vendor=0x10de, dev=0x0265, revid=0xa1
> bus=0, slot=13, func=0
> class=01-01-8a, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns),
maxlat=0x01 (250 ns)
> powerspec 2 supports D0 D3 current D0
> map[20]: type 4, range 32, base 00003080, size 4,
enabled
> found-> vendor=0x10de, dev=0x0266, revid=0xa1
> bus=0, slot=14, func=0
> class=01-01-85, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x03 (750 ns),
maxlat=0x01 (250 ns)
> intpin=a, irq=7
> powerspec 2 supports D0 D3 current D0
> MSI supports 4 messages, 64 bit
> map[10]: type 4, range 32, base 000030b0, size 3,
enabled
> map[14]: type 4, range 32, base 000030a4, size 2,
enabled
> map[18]: type 4, range 32, base 000030a8, size 3,
enabled
> map[1c]: type 4, range 32, base 000030a0, size 2,
enabled
> map[20]: type 4, range 32, base 00003090, size 4,
enabled
> map[24]: type 1, range 32, base c0006000, size 12,
memory disabled
> pcib0: matched entry for 0.14.INTA (src
\_SB_.PCI0.LTID:0)
> pcib0: slot 14 INTA routed to irq 7 via
\_SB_.PCI0.LTID
> found-> vendor=0x10de, dev=0x026f, revid=0xa2
> bus=0, slot=16, func=0
> class=06-04-01, hdrtype=0x01, mfdev=1
> cmdreg=0x0107, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns),
maxlat=0x02 (500 ns)
> found-> vendor=0x10de, dev=0x026c, revid=0xa2
> bus=0, slot=16, func=1
> class=04-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x02 (500 ns),
maxlat=0x05 (1250 ns)
> intpin=b, irq=11
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit, vector masks
> map[10]: type 1, range 32, base c0000000, size 14,
enabled
> pcib0: matched entry for 0.16.INTB (src
\_SB_.PCI0.LAZA:0)
> pcib0: slot 16 INTB routed to irq 11 via
\_SB_.PCI0.LAZA
> found-> vendor=0x10de, dev=0x0269, revid=0xa3
> bus=0, slot=20, func=0
> class=06-80-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x01 (250 ns),
maxlat=0x14 (5000 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base c0007000, size 12,
enabled
> map[14]: type 4, range 32, base 000030b8, size 3,
enabled
> pcib0: matched entry for 0.20.INTA (src
\_SB_.PCI0.LMAC:0)
> pci_link11: Picked IRQ 5 with weight 1
> pcib0: slot 20 INTA routed to irq 5 via
\_SB_.PCI0.LMAC
> found-> vendor=0x1022, dev=0x1100, revid=0x00
> bus=0, slot=24, func=0
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x1022, dev=0x1101, revid=0x00
> bus=0, slot=24, func=1
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x1022, dev=0x1102, revid=0x00
> bus=0, slot=24, func=2
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> found-> vendor=0x1022, dev=0x1103, revid=0x00
> bus=0, slot=24, func=3
> class=06-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00
(0 ns)
> pci0: <memory, RAM> at device 0.0 (no driver
attached)
> pci0: <memory, RAM> at device 0.1 (no driver
attached)
> pci0: <memory, RAM> at device 0.2 (no driver
attached)
> pci0: <memory, RAM> at device 0.3 (no driver
attached)
> pci0: <memory, RAM> at device 0.4 (no driver
attached)
> pci0: <memory, RAM> at device 0.5 (no driver
attached)
> pci0: <memory, RAM> at device 0.6 (no driver
attached)
> pci0: <memory, RAM> at device 0.7 (no driver
attached)
> nvidia0: <GeForce Go 6100> mem
0xc2000000-0xc2ffffff,0xd0000000-0xdfffffff,0xc1000000-0xc1f
fffff irq 5 at device 5.0 on pci0
> nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3
at 0xc2000000
> nvidia0: Reserved 0x10000000 bytes for rid 0x14 type 3
at 0xd0000000
> nvidia0: Reserved 0x1000000 bytes for rid 0x1c type 3
at 0xc1000000
> nvidia0: [GIANT-LOCKED]
> pci0: <memory, RAM> at device 9.0 (no driver
attached)
> isab0: <PCI-ISA bridge> at device 10.0 on pci0
> isa0: <ISA bus> on isab0
> nfsmb0: <nForce2/3/4 MCP SMBus Controller> port
0x3040-0x307f,0x3000-0x303f irq 7 at device 10.1 on pci0
> nfsmb0: Reserved 0x40 bytes for rid 0x20 type 4 at
0x3040
> smbus0: <System Management Bus> on nfsmb0
> smb0: <SMBus generic I/O> on smbus0
> nfsmb1: <nForce2/3/4 MCP SMBus Controller> on
nfsmb0
> nfsmb0: Reserved 0x40 bytes for rid 0x24 type 4 at
0x3000
> smbus1: <System Management Bus> on nfsmb1
> smb1: <SMBus generic I/O> on smbus1
> ohci0: <OHCI (generic) USB controller> mem
0xc0004000-0xc0004fff irq 11 at device 11.0 on pci0
> ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at
0xc0004000
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> usbd_get_string: getting lang failed, using 0
> uhub0: <nVidia OHCI root hub, class 9/0, rev
1.00/1.00, addr 1> on usb0
> uhub0: 8 ports with 8 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem
0xc0005000-0xc00050ff irq 9 at device 11.1 on pci0
> ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at
0xc0005000
> ehci0: [GIANT-LOCKED]
> usb1: EHCI version 1.0
> usb1: companion controller, 8 ports each: usb0
> usb1: <EHCI (generic) USB 2.0 controller> on
ehci0
> usb1: USB revision 2.0
> uhub1: <nVidia EHCI root hub, class 9/0, rev
2.00/1.00, addr 1> on usb1
> uhub1: 8 ports with 8 removable, self powered
> usbd_new_device: addr=2, getting first desc failed
> uhub_explore: usb_new_device failed, error=IOERROR
> uhub1: device problem (IOERROR), disabling port 8
> atapci0: <nVidia nForce MCP51 UDMA133 controller>
port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at
device 13.0 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at
0x3080
> ata0: <ATA channel 0> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at
0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at
0x3f6
> ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
> ata0: [MPSAFE]
> ata1: <ATA channel 1> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at
0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at
0x376
> ata1: reset tp1 mask=03 ostat0=50 ostat1=01
> ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
> ata1: reset tp2 stat0=10 stat1=01
devices=0x4<ATAPI_MASTER>
> ata1: [MPSAFE]
> atapci1: <nVidia nForce MCP51 SATA300 controller>
port
0x30b0-0x30b7,0x30a4-0x30a7,0x30a8-0x30af,0x30a0-0x30a3,0x30
90-0x309f mem 0xc0006000-0xc0006fff irq 7 at device 14.0 on
pci0
> atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at
0x3090
> atapci1: [MPSAFE]
> atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at
0xc0006000
> ata2: <ATA channel 0> on atapci1
> atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at
0x30b0
> atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at
0x30a4
> ata2: SATA connect ready time=0ms
> ata2: sata_connect devices=0x1<ATA_MASTER>
> ata2: [MPSAFE]
> ata3: <ATA channel 1> on atapci1
> atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at
0x30a8
> atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at
0x30a0
> ata3: SATA connect status=00000000
> ata3: [MPSAFE]
> pcib1: <ACPI PCI-PCI bridge> at device 16.0 on
pci0
> pcib1: secondary bus 4
> pcib1: subordinate bus 5
> pcib1: I/O decode 0xf000-0xfff
> pcib1: memory decode 0xc3000000-0xc30fffff
> pcib1: prefetched decode 0xfff00000-0xfffff
> pcib1: Subtractively decoded bridge.
> ACPI: Found matching pin for 4.7.INTA at func 0: 10
> pci_link0: BIOS IRQ 10 for 4.7.INTA is invalid
> ACPI: Found matching pin for 4.7.INTB at func 1: 11
> pci4: <ACPI PCI bus> on pcib1
> pci4: physical bus=4
> found-> vendor=0x1524, dev=0x1412, revid=0x10
> bus=4, slot=7, func=0
> class=06-07-00, hdrtype=0x02, mfdev=1
> cmdreg=0x0104, statreg=0x0210, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x44 (17000 ns),
maxlat=0x03 (750 ns)
> intpin=a, irq=10
> powerspec 1 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base c3000000, size 12,
memory disabled
> pcib1: (null) requested memory range
0xc3000000-0xc3000fff: good
> pcib1: matched entry for 4.7.INTA (src
\_SB_.PCI0.LNK1:0)
> pci_link0: Picked IRQ 9 with weight 1
> pcib1: slot 7 INTA routed to irq 9 via \_SB_.PCI0.LNK1
> found-> vendor=0x1524, dev=0x0530, revid=0x01
> bus=4, slot=7, func=1
> class=05-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns),
maxlat=0x04 (1000 ns)
> intpin=b, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base c3001000, size 7,
enabled
> pcib1: (null) requested memory range
0xc3001000-0xc300107f: good
> pcib1: matched entry for 4.7.INTB (src
\_SB_.PCI0.LNK2:0)
> pcib1: slot 7 INTB routed to irq 11 via
\_SB_.PCI0.LNK2
> found-> vendor=0x1524, dev=0x0550, revid=0x01
> bus=4, slot=7, func=2
> class=08-05-01, hdrtype=0x00, mfdev=1
> cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns),
maxlat=0x48 (18000 ns)
> intpin=b, irq=11
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base c3001400, size 8,
enabled
> pcib1: (null) requested memory range
0xc3001400-0xc30014ff: good
> pcib1: matched entry for 4.7.INTB (src
\_SB_.PCI0.LNK2:0)
> pcib1: slot 7 INTB routed to irq 11 via
\_SB_.PCI0.LNK2
> found-> vendor=0x1524, dev=0x0551, revid=0x01
> bus=4, slot=7, func=4
> class=05-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0104, statreg=0x0210, cachelnsz=16 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns),
maxlat=0x48 (18000 ns)
> intpin=b, irq=255
> powerspec 2 supports D0 D1 D2 D3 current D0
> map[10]: type 1, range 32, base 00000000, size 8,
memory disabled
> cbb0: <PCI-CardBus Bridge> mem
0xc3000000-0xc3000fff irq 9 at device 7.0 on pci4
> cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at
0xc3000000
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb0: [MPSAFE]
> cbb0: PCI Configuration space:
> 0x00: 0x14121524 0x02100107 0x06070010 0x00824010
> 0x10: 0xc3000000 0x020000a0 0x20050504 0xfffff000
> 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
> 0x30: 0x00000000 0xfffffffc 0x00000000 0x07440109
> 0x40: 0x54031558 0x00000001 0x00000000 0x00000000
> 0x50: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x60: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x70: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x80: 0x0040d020 0x00000000 0x00000000 0x01d11222
> 0x90: 0x604400c0 0x00000000 0x00000000 0x00000000
> 0xa0: 0xfe010001 0x00c00000 0x00000018 0x00000007
> 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xc0: 0x00001003 0x00800080 0x10080700 0x000007fe
> 0xd0: 0x00000020 0x00000000 0x00000000 0x00000000
> 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
> pci4: <memory, flash> at device 7.1 (no driver
attached)
> pci4: <base peripheral> at device 7.2 (no driver
attached)
> pci4: <memory, flash> at device 7.4 (no driver
attached)
> pci0: <multimedia> at device 16.1 (no driver
attached)
> nve0: <NVIDIA nForce MCP13 Networking Adapter>
port 0x30b8-0x30bf mem 0xc0007000-0xc0007fff irq 5 at device
20.0 on pci0
> nve0: nvenetlib.o version 1.0-13
> nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at
0xc0007000
> nve0: Ethernet address 00:90:f5:4f:18:1b
> miibus0: <MII bus> on nve0
> rlphy0: <RTL8201L 10/100 media interface> on
miibus0
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
> nve0: bpf attached
> nve0: Ethernet address: 00:90:f5:4f:18:1b
> nve0: [MPSAFE]
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz0: _CRT value is absurd, ignored (154.8C)
> atkbdc0: <Keyboard controller (i8042)> port
0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0,
flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: unable to allocate IRQ
> psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse, device ID 3-00, 3 buttons
> psm0: config:00000000, flags:00000008, packet size:4
> psm0: syncmask:08, syncbits:00
> sio0: irq maps: 0xe01 0xe11 0xe01 0xe01
> sio0: irq maps: 0xe01 0xe11 0xe01 0xe01
> sio0: <16550A-compatible COM port> port
0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio0: [FAST]
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> atkbdc: atkbdc0 already exists; skipping it
> sio: sio0 already exists; skipping it
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem
0xc0000-0xcefff,0xcf000-0xd07ff pnpid ORM0000 on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> le0: not probed (disabled)
> ppc0 failed to probe at irq 7 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd1, terminal emulator: sc (syscons
terminal)
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0xe01 0xe01 0xe01 0xe01
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> Device configuration finished.
> procfs registered
> Timecounter "TSC" frequency 1607325121 Hz
quality 800
> Timecounters tick every 1.000 msec
> Linux ELF exec handler installed
> lo0: bpf attached
> acpi_tz0: _CRT value is absurd, ignored (154.8C)
> acpi_acad0: acline initialization start
> acpi_acad0: On Line
> acpi_acad0: acline initialization done, tried 1 times
> battery0: battery initialization start
> battery0: battery initialization done, tried 1 times
> ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40
wire
> acd0: setting PIO4 on nForce MCP51 chip
> acd0: setting UDMA33 on nForce MCP51 chip
> acd0: <TSSTcorpCD/DVDW SN-S082D/SS00> DVDR drive
at ata1 as master
> acd0: read 4134KB/s (4134KB/s) write 172KB/s
(4134KB/s), 2048KB buffer, UDMA33
> acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR,
DVDRAM, packet
> acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write,
burnproof
> acd0: Audio: play, 256 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40
wire
> ad4: 76319MB <FUJITSU MHV2080BH 00000028> at
ata2-master SATA150
> ad4: 156301488 sectors [155061C/16H/63S] 16
sectors/interrupt 1 depth queue
> GEOM: new disk ad4
> ad4: nVidia check1 failed
> ad4: Adaptec check1 failed
> ad4: LSI (v3) check1 failed
> ad4: LSI (v2) check1 failed
> ad4: FreeBSD check1 failed
> ATA PseudoRAID loaded
> Trying to mount root from ufs:/dev/ad4s1a
> start_init: trying /sbin/init
> linprocfs registered
> acpi_tz0: _CRT value is absurd, ignored (154.8C)
> acpi_tz0: _CRT value is absurd, ignored (154.8C)
> usbd_new_device: addr=2, getting first desc failed
> uhub_explore: usb_new_device failed, error=IOERROR
> uhub1: device problem (IOERROR), disabling port 4
>
>
------------------------------------------------------------
------------
>
> none0pci0:0:0: class=0x050000 card=0x00000000
chip=0x02f310de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = memory
> subclass = RAM
> none1pci0:0:1: class=0x050000 card=0x00000000
chip=0x02fa10de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = memory
> subclass = RAM
> none2pci0:0:2: class=0x050000 card=0x00000000
chip=0x02fe10de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = memory
> subclass = RAM
> none3pci0:0:3: class=0x050000 card=0x00000000
chip=0x02f810de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = memory
> subclass = RAM
> none4pci0:0:4: class=0x050000 card=0x00000000
chip=0x02f910de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = memory
> subclass = RAM
> none5pci0:0:5: class=0x050000 card=0x00000000
chip=0x02ff10de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = memory
> subclass = RAM
> none6pci0:0:6: class=0x050000 card=0x00000000
chip=0x027f10de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = memory
> subclass = RAM
> none7pci0:0:7: class=0x050000 card=0x00000000
chip=0x027e10de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = memory
> subclass = RAM
> nvidia0pci0:5:0: class=0x030000 card=0x54031558
chip=0x024710de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = display
> subclass = VGA
> none8pci0:9:0: class=0x050000 card=0xcb8410de
chip=0x027010de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = memory
> subclass = RAM
> isab0pci0:10:0: class=0x060100 card=0x54031558
chip=0x026010de rev=0xa3 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = bridge
> subclass = PCI-ISA
> nfsmb0pci0:10:1: class=0x0c0500 card=0x54031558
chip=0x026410de rev=0xa3 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = serial bus
> subclass = SMBus
> ohci0pci0:11:0: class=0x0c0310 card=0x54031558
chip=0x026d10de rev=0xa3 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = serial bus
> subclass = USB
> ehci0pci0:11:1: class=0x0c0320 card=0x54031558
chip=0x026e10de rev=0xa3 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = serial bus
> subclass = USB
> atapci0pci0:13:0: class=0x01018a card=0x54031558
chip=0x026510de rev=0xa1 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = mass storage
> subclass = ATA
> atapci1pci0:14:0: class=0x010185 card=0x54031558
chip=0x026610de rev=0xa1 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = mass storage
> subclass = ATA
> pcib1pci0:16:0: class=0x060401 card=0x000000b8
chip=0x026f10de rev=0xa2 hdr=0x01
> vendor = 'NVIDIA Corporation'
> class = bridge
> subclass = PCI-PCI
> pcm0pci0:16:1: class=0x040300 card=0x54031558
chip=0x026c10de rev=0xa2 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = multimedia
> nve0pci0:20:0: class=0x068000 card=0x54031558
chip=0x026910de rev=0xa3 hdr=0x00
> vendor = 'NVIDIA Corporation'
> class = bridge
> hostb0pci0:24:0: class=0x060000 card=0x00000000
chip=0x11001022 rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices (AMD)'
> device = 'Athlon 64 / Opteron HyperTransport
Technology Configuration'
> class = bridge
> subclass = HOST-PCI
> hostb1pci0:24:1: class=0x060000 card=0x00000000
chip=0x11011022 rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices (AMD)'
> device = 'Athlon 64 / Opteron Address Map'
> class = bridge
> subclass = HOST-PCI
> hostb2pci0:24:2: class=0x060000 card=0x00000000
chip=0x11021022 rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices (AMD)'
> device = 'Athlon 64 / Opteron DRAM Controller'
> class = bridge
> subclass = HOST-PCI
> hostb3pci0:24:3: class=0x060000 card=0x00000000
chip=0x11031022 rev=0x00 hdr=0x00
> vendor = 'Advanced Micro Devices (AMD)'
> device = 'Athlon 64 / Opteron Miscellaneous
Control'
> class = bridge
> subclass = HOST-PCI
> cbb0pci4:7:0: class=0x060700 card=0x54031558
chip=0x14121524 rev=0x10 hdr=0x02
> vendor = 'ENE Technology Inc'
> device = 'CB-712/714 CardBus Controller'
> class = bridge
> subclass = PCI-CardBus
> none9pci4:7:1: class=0x050100 card=0x54031558
chip=0x05301524 rev=0x01 hdr=0x00
> vendor = 'ENE Technology Inc'
> class = memory
> subclass = flash
> none10pci4:7:2: class=0x080501 card=0x54031558
chip=0x05501524 rev=0x01 hdr=0x00
> vendor = 'ENE Technology Inc'
> class = base peripheral
> none11pci4:7:4: class=0x050100 card=0x54031558
chip=0x05511524 rev=0x01 hdr=0x00
> vendor = 'ENE Technology Inc'
> class = memory
> subclass = flash
>
>
------------------------------------------------------------
------------
>
> _______________________________________________
> freebsd-currentfreebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-curre
nt
> To unsubscribe, send any mail to
"freebsd-current-unsubscribefreebsd.org"
I have the same problem, I reported it earlier but none
seemed to have
any clue.
I'm running freebsd-current and an Asus MN2PV-VM
(Nforce430+GeForce 6150
integrated chipset)
Bruno
_______________________________________________
freebsd-usbfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to
"freebsd-usb-unsubscribefreebsd.org"
|
|
| Problems with USB on CURRENT |
|
2006-09-24 20:50:03 |
Bruno Damour <freebsd.ruomadfree.fr> schreibt:
> Andrey V. Elsukov wrote:
>> Hi, All!
>>
>> I have notebook Maxselect Mission GT3000.
>> A hardware configuration description (russian):
>> http://www.maxselect.ru/catalog/models.ht
ml?id=4024&template=normal
>>
>> o Mobile AMD Sempron
>> o NVIDIA C51MV+MCP51M
>> o PCI Express nVidia Geforce Go 6100
>> o Realtek HDA
>>
>> I have several problems. One is with USB. When i
attach USB Flash
>> disk it's not work.
>>
>> usbd_new_device: addr=2, getting first desc failed
>> uhub_explore: usb_new_device failed, error=IOERROR
>> uhub1: device problem (IOERROR), disabling port 4
>>
>> http://butcher.
heavennet.ru/dmesg.txt
>> http://butche
r.heavennet.ru/pciconf.txt
>> I've attached dmesg and pciconf.
>> Any suggestions?
[...]
> I have the same problem, I reported it earlier but none
seemed to have
> any clue.
>
> I'm running freebsd-current and an Asus MN2PV-VM
(Nforce430+GeForce
> 6150 integrated chipset)
I saw the same error message on -current with my USB key.
With 6.1
RELEASE and older it works. The motherboard is an ASUS A8N,
Nvidia
nv4 chipset.
Wolfram
_______________________________________________
freebsd-usbfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to
"freebsd-usb-unsubscribefreebsd.org"
|
|
| Problems with USB on CURRENT |
|
2006-09-24 23:49:02 |
Hi, All!
On Sun, 24 Sep 2006, Andrey V. Elsukov wrote:
> Hi, All!
>
> I have notebook Maxselect Mission GT3000.
> A hardware configuration description (russian):
> http://www.maxselect.ru/catalog/models.ht
ml?id=4024&template=normal
>
> o Mobile AMD Sempron
> o NVIDIA C51MV+MCP51M
> o PCI Express nVidia Geforce Go 6100
> o Realtek HDA
>
> I have several problems. One is with USB.
> When i attach USB Flash disk it's not work.
>
> usbd_new_device: addr=2, getting first desc failed
> uhub_explore: usb_new_device failed, error=IOERROR
> uhub1: device problem (IOERROR), disabling port 4
>
> http://butcher.
heavennet.ru/dmesg.txt
> http://butche
r.heavennet.ru/pciconf.txt
> I've attached dmesg and pciconf.
> Any suggestions?
> --
> WBR, Andrey V. Elsukov
>
I had precisely the same problem with USB-2 flash (both old
USB-1.1
flash and digital camera - Kodak C340, uses ugen) work
perfectly all
right. MB: Asus A8N (nForce4 based). The problem went away
with
retrying to get device descriptor in usbd_new_device (see
patch below).
I've submitted PR (usb/103167) but so far there's been no
reaction at all
:-(
Hope this helps,
Vladimir
/* ----------- patch begins here -------------- */
*** dev/usb/usb_subr.c.orig Mon Sep 11 19:28:35 2006
--- dev/usb/usb_subr.c Mon Sep 11 20:05:38 2006
***************
*** 1112,1118 ****
dd = &dev->ddesc;
/* Get the first 8 bytes of the device descriptor. */
! err = usbd_get_desc(dev, UDESC_DEVICE, 0,
USB_MAX_IPACKET, dd);
if (err) {
DPRINTFN(-1, ("usbd_new_device: addr=%d, getting
first desc "
"failedn", addr));
--- 1112,1123 ----
dd = &dev->ddesc;
/* Get the first 8 bytes of the device descriptor. */
! for (i = 0; i < 3; i++) {
! err = usbd_get_desc(dev, UDESC_DEVICE, 0,
USB_MAX_IPACKET, dd);
! if (!err)
! break;
! usbd_delay_ms(dev, USB_SET_ADDRESS_SETTLE);
! }
if (err) {
DPRINTFN(-1, ("usbd_new_device: addr=%d, getting
first desc "
"failedn", addr));
/* -------------- end ----------------- */
_______________________________________________
freebsd-usbfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to
"freebsd-usb-unsubscribefreebsd.org"
|
|
| Problems with USB on CURRENT |
|
2006-09-25 21:05:10 |
Vladimir Kushnir wrote:
> Hi, All!
>
> On Sun, 24 Sep 2006, Andrey V. Elsukov wrote:
>
>> Hi, All!
>>
>> I have notebook Maxselect Mission GT3000.
>> A hardware configuration description (russian):
>> http://www.maxselect.ru/catalog/models.ht
ml?id=4024&template=normal
>>
>> o Mobile AMD Sempron
>> o NVIDIA C51MV+MCP51M
>> o PCI Express nVidia Geforce Go 6100
>> o Realtek HDA
>>
>> I have several problems. One is with USB.
>> When i attach USB Flash disk it's not work.
>>
>> usbd_new_device: addr=2, getting first desc failed
>> uhub_explore: usb_new_device failed, error=IOERROR
>> uhub1: device problem (IOERROR), disabling port 4
>>
>> http://butcher.
heavennet.ru/dmesg.txt
>> http://butche
r.heavennet.ru/pciconf.txt
>> I've attached dmesg and pciconf.
>> Any suggestions?
>> --
>> WBR, Andrey V. Elsukov
>>
>
> I had precisely the same problem with USB-2 flash (both
old USB-1.1
> flash and digital camera - Kodak C340, uses ugen) work
perfectly all
> right. MB: Asus A8N (nForce4 based). The problem went
away with
> retrying to get device descriptor in usbd_new_device
(see patch below).
> I've submitted PR (usb/103167) but so far there's been
no reaction at
> all :-(
>
> Hope this helps,
> Vladimir
>
> /* ----------- patch begins here -------------- */
>
> *** dev/usb/usb_subr.c.orig Mon Sep 11 19:28:35 2006
> --- dev/usb/usb_subr.c Mon Sep 11 20:05:38 2006
> ***************
> *** 1112,1118 ****
>
> dd = &dev->ddesc;
> /* Get the first 8 bytes of the device
descriptor. */
> ! err = usbd_get_desc(dev, UDESC_DEVICE, 0,
USB_MAX_IPACKET, dd);
> if (err) {
> DPRINTFN(-1, ("usbd_new_device: addr=%d,
getting first desc "
> "failedn", addr));
> --- 1112,1123 ----
>
> dd = &dev->ddesc;
> /* Get the first 8 bytes of the device
descriptor. */
> ! for (i = 0; i < 3; i++) {
> ! err = usbd_get_desc(dev, UDESC_DEVICE, 0,
USB_MAX_IPACKET, dd);
> ! if (!err)
> ! break;
> ! usbd_delay_ms(dev, USB_SET_ADDRESS_SETTLE);
> ! }
> if (err) {
> DPRINTFN(-1, ("usbd_new_device: addr=%d,
getting first desc "
> "failedn", addr));
>
> /* -------------- end ----------------- */
> _______________________________________________
> freebsd-currentfreebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-curre
nt
> To unsubscribe, send any mail to
> "freebsd-current-unsubscribefreebsd.org"
Well, it _WORKS_ !!
After applying your patch and recompiling my kernel, I plug
my usb key
and it works !
umass creates /dev/da0 and I'm able to mount my disk and
work...
Thank you very much !!
I still have an error in dmesg though, but it might be
something else.
This patch should be discussed and tested ASAP with other
hardware.
Bruno
PS : see my dmesg :
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 7.0-CURRENT #4: Mon Sep 25 22:27:26 CEST 2006
rootvil1.ruomad.net:/usr/obj/usr/src/sys/VIL1
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor 2800+ (1607.42-MHz 686-class
CPU)
Origin = "AuthenticAMD" Id = 0x40ff2 Stepping
= 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,API
C,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2&
gt;
Features2=0x2001<SSE3,CX16>
AMD
Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow
!+,3DNow!>
AMD Features2=0x19<LAHF,ExtAPIC,CR8>
real memory = 1039073280 (990 MB)
avail memory = 1007489024 (960 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> mem
0xfc000000-0xfcffffff,0xe0000000-0xefffffff,0xfb000000-0xfbf
fffff irq 16
at device 5.0 on pci0
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver
attached)
pci0: <memory, RAM> at device 10.2 (no driver
attached)
ohci0: <OHCI (generic) USB controller> mem
0xfe02f000-0xfe02ffff irq 21
at device 11.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00,
addr 1> on usb0
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem
0xfe02e000-0xfe02e0ff irq
22 at device 11.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1> on usb1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfd00-0xfd0f at device
13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xf800-0xf80
f mem
0xfe02d000-0xfe02dfff irq 23 at device 14.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce MCP51 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xf300-0xf30
f mem
0xfe02c000-0xfe02cfff irq 20 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib4: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci4: <ACPI PCI bus> on pcib4
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xfdbff000-0xfdbff7ff,0xfdbf8000-0xfdbfbfff irq 19 at device
5.0 on pci4
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:bc:4e:88
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:bc:4e:88
fwe0: Ethernet address: 02:11:d8:bc:4e:88
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ndis0: <Wireless-G PCI Adapter> mem
0xfdbfc000-0xfdbfdfff irq 17 at
device 9.0 on pci4
ndis0: NDIS API version: 5.0
ndis0: Ethernet address: 00:0c:41:64:3c:2a
pcm0: <NVidia MCP51 High Definition Audio Controller>
mem
0xfe024000-0xfe027fff irq 21 at device 16.1 on pci0
nfe0: <NVIDIA nForce 430 Networking Adapter> port
0xf200-0xf207 mem
0xfe02b000-0xfe02bfff irq 22 at device 20.0 on pci0
miibus0: <MII bus> on nfe0
ukphy0: <Generic IEEE 802.3u media interface> on
miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT,
1000baseT-FDX, auto
nfe0: Ethernet address: 00:17:31:d8:c7:55
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff
irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FAST]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff
irq 3 on acpi0
sio1: type 16550A
sio1: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64
irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff pnpid
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ums0: <Logitech USB Mouse, class 0/0, rev 1.10/4.10, addr
2> on uhub0
ums0: 3 buttons and Z dir.
uhub0: device problem (SET_ADDR_FAILED), disabling port 6
Timecounter "TSC" frequency 1607419447 Hz quality
800
Timecounters tick every 1.000 msec
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <DVDRW IDE 16X/VER A091> at ata1-master
UDMA33
ad4: 238475MB <Seagate ST3250624AS 3.AAE> at
ata2-master SATA300
ad8: 238475MB <Seagate ST3250823AS 3.03> at
ata4-master SATA150
ad10: 238475MB <Seagate ST3250823AS 3.03> at
ata5-master SATA150
pcm0: <HDA Codec: Analog Device AD1986A>
pcm0: <HDA Driver Revision: 20060924_023>
ar0: 238475MB <nVidia MediaShield RAID1> status: READY
ar0: disk0 READY (master) using ad10 at ata5-master
ar0: disk1 READY (mirror) using ad8 at ata4-master
Trying to mount root from ufs:/dev/ad4s2a
plip0: [GIANT-LOCKED]
fuse4bsd: version 0.3.0, FUSE ABI 7.5
umass0: <SMI Corporation USB DISK, class 0/0, rev
2.00/11.00, addr 2> on
uhub1
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB Flash Disk 1100> Removable Direct Access
SCSI-0 device
da0: 40.000MB/s transfers
da0: 967MB (1981440 512 byte sectors: 64H 32S/T 967C)
_______________________________________________
freebsd-usbfreebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to
"freebsd-usb-unsubscribefreebsd.org"
|
|
[1-5]
|
|