amd64/117972: SATA DLT V4 not recognized properly

>Number:         117972
>Category:       amd64
>Synopsis:       SATA DLT V4 not recognized properly
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    freebsd-amd64
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sun Nov 11 11:10:01 UTC 2007
>Closed-Date:
>Last-Modified:
>Originator:     Reinhard Haller
>Release:        7.0 Beta 2
>Organization:
INTERACTIVE Computer Systems
>Environment:
FreeBSD fs-bsd.interactive.de 7.0-BETA2 FreeBSD 7.0-BETA2
#0: Fri Nov  2 14:54:38 UTC 2007     rootmyers.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC 
amd64
>Description:
The following excerpt from dmesg shows the problem:
device ast0 is not recognized and therefore unusable.

The attached device is a Quantum DLT V4 Sata device. I
tested the device
with bacula 1.38 on debian 4.0 and it works without any
problem.

atapci0: <nVidia nForce MCP51 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device
13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP51 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00
f mem 0xfe02d000-0xfe02dfff irq 23 at device 14.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP51 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0
f mem 0xfe02c000-0xfe02cfff irq 20 at device 15.0 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]

acd0: DVDR <HL-DT-ST DVDRAM GSA-H10N/JL10> at
ata0-master UDMA33
ad4: 381554MB <SAMSUNG HD403LJ CT100-12> at
ata2-master SATA300
ad6: 381554MB <SAMSUNG HD403LJ CT100-10> at
ata3-master SATA300
ad8: 381554MB <SAMSUNG HD403LJ CT100-10> at
ata4-master SATA300
ast0: FAILURE - MODE_SENSE ILLEGAL REQUEST asc=0x24
ascq=0x00 sks=0x4d 0x00 0x02
ast0: FAILURE - MODE_SENSE ILLEGAL REQUEST asc=0x24
ascq=0x00 sks=0x4d 0x00 0x02
ast0: FAILURE - MODE_SENSE ILLEGAL REQUEST asc=0x24
ascq=0x00 sks=0x4d 0x00 0x02
ast0: FAILURE - MODE_SENSE ILLEGAL REQUEST asc=0x24
ascq=0x00 sks=0x4d 0x00 0x02
device_attach: ast0 attach returned 6

Hardware:
ASUS M2NBP-VM CSM Board with Nvidia nForce 430B MCP and
Quadro NVS210S GPU
AMD Athlon X2 BE-2300
4 GB Ram

>How-To-Repeat:
simply boot
>Fix:
no

>Release-Note:
>Audit-Trail:
>Unformatted:
_______________________________________________
freebsd-amd64freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
To unsubscribe, send any mail to
"freebsd-amd64-unsubscribefreebsd.org"