RE: Building GDB Statically

I finally found how to do it. Under
gdb6.6root/gdb/Makefile.in edit
there is a commented line like so:

#(CC_LD)=gcc -static
(CC_LD)=(CC)

I Just had to comment in the first line and comment out the
second. I
also built it with out the shared libraries. the resulting
Binary still
does not work under RH9 though, complains that the kernel
version is too
old.

BTW another possibility was if you used the optional CFLAG
parameter
from the make command itself:

make CFLAG=-static

I am instead Building GDB6.4 on RH9 and am going to use that
as my cross
host GDB binary, I have built it statically on RH9 and thus
far have
confirmed that it works on FC6.

thanks for the help.

Fahd
 


-----Original Message-----
From: gdb-ownersourceware.org [mailto:gdb-ownersourceware.org] On
Behalf Of Daniel Jacobowitz
Sent: Tuesday, March 13, 2007 3:16 PM
To: Dave Korn
Cc: Fahd Abidi; gdbsourceware.org
Subject: Re: Building GDB Statically


On Tue, Mar 13, 2007 at 06:07:55PM -0000, Dave Korn wrote:
>   Most GNU software allows you to specify
"--disable-shared" as an 
> option to the configure command to obtain a
statically-linked build; 
> this takes care of everything you need to do for both
compiler flags, 
> linker flags, libtool settings etc.

Actually, --disable-shared normally only generates static
libraries
instead of shared libraries.

Setting LDFLAGS or CFLAGS should work.  However GDB may or
may not when
moved between systems; I do not recommend the use of static
binaries.
Compiling a dynamically linked binary on the oldest
interesting system
works best.

-- 
Daniel Jacobowitz
CodeSourcery