HAL crashes after upgrade to DBUS to 1.0.2 (not rev-dep problem)

Hi
After system upgrade (by emerge world) hald won't start
anymore.
When i try to start it manually using hald --verbose=yes
--daemon=no I
get:
[...]
22:09:44.641 [I] coldplug.c:246: found in udevdb
'/sys/block/ram1'
'/dev/rd/1' block: /sys/block/ram0 (block)
22:09:44.641 [I] coldplug.c:246: found in udevdb
'/sys/block/ram0'
'/dev/rd/0' block: /sys/block/dm-0 (block)
22:09:44.642 [I] osspec.c:528: Synthesizing powermgmt
events...
22:09:44.642 [E] acpi.c:795: Couldn't open
/proc/acpi/battery: Error
opening dir ectory '/proc/acpi/battery': No such file or
directory
22:09:44.642 [I] acpi.c:768: Processing
/proc/acpi/processor/CPU1
22:09:44.642 [I] acpi.c:768: Processing
/proc/acpi/processor/CPU0
22:09:44.642 [E] acpi.c:795: Couldn't open
/proc/acpi/ac_adapter: Error
opening
directory '/proc/acpi/ac_adapter': No such file or
directory
22:09:44.642 [E] acpi.c:795: Couldn't open
/proc/acpi/button/lid: Error
opening
directory '/proc/acpi/button/lid': No such file or
directory
22:09:44.642 [I] acpi.c:768: Processing
/proc/acpi/button/power/PWRF
22:09:44.643 [I] acpi.c:768: Processing
/proc/acpi/button/sleep/SLPB
22:09:44.643 [I] osspec.c:530: ACPI capabilities found 
22:09:44.643 [I] osspec.c:540: Done synthesizing events
process 8238: dbus message
iterator looks uninitialized or corrupted D-Bus not built
with
-rdynamic so unable to print a backtrace *** [DIE]
hald_runner.c:runner_died():69 : Runner died
beast drstorm #

Software versions:
beast drstorm # emerge -pv hal udev dbus

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R   ] sys-apps/hal-0.5.7.1-r3  USE="acpi
crypt dmi -debug -doc -pcmcia (-selinux)" 0 kB
[ebuild   R   ] sys-fs/udev-104-r4 
USE="(-selinux)" 0 kB
[ebuild   R   ] sys-apps/dbus-1.0.2  USE="X -debug -doc
(-selinux)" 0 kB

Total size of downloads: 0 kB
beast drstorm #

I've tried using revdep-rebuild without any success, after
that I've
reemerged dbus, hal and udev
I even tried to delete configfiles for dbus and hal before
reemerging
them again) But it still isn't working :( 
These are my CFLAGS:
CFLAGS="-march=nocona -Os -s -fomit-frame-pointer -pipe
-DNDEBUG -DG_DISABLE_ASSERT" 
CHOST="x86_64-pc-linux-gnu" 
CXXFLAGS="-march=nocona -Os -s -fomit-frame-pointer
-pipe -DNDEBUG -DG_DISABLE_ASSERT"
MAKEOPTS="-j3"
My system is P4-3GHz with 2GB RAM (highmem)

Thanks for any help.

Best regards
DrStorm
-- 
Q: Where will I go after I die?
A: Onto a DAT tape.


-- 
gentoo-amd64gentoo.org mailing list