vlans vconfig and 802.1q configuration under gentoo

This may not be a total solution or fix, but it seems you
are using a syntax for route that is somewhat dated. I would
try routes_eth0="213.251.152.1" in place of your
gateway line and see if that helps at all.

Ted	

-----Original Message-----
From: David CHANIAL [mailto:david.mleuro-web.fr] 
Sent: Monday, July 17, 2006 12:59 PM
To: gentoo-serverlists.gentoo.org
Subject: [gentoo-server] vlans vconfig and 802.1q
configuration under gentoo

Hi alls,
I hope someone has help for me and this case.

I successfully and simply use dot1q vlans with linux, but
when i want to gear them from /etc/conf.d/net, it fail.

Actually i use the next /etc/conf.d/net:
http:
//www.rafb.net/paste/results/1WIOf642.html

And i manually launch :
http:
//www.rafb.net/paste/results/0FcwCt46.html

So in the actual case, i have :
- eth1/192.168.240.1 flow which is untagged (native vlan at
other side is 311)
- vlan312/10.240.31.1 flow which use eth1, as tagged 

***
I would have a gentoo network config which provide me a full
vlan support :

- vlan311/192.168.240.1 flow which use eth1 as tagged
- vlan312/10.240.31.1 flow which use eth1, as tagged

Best regards,
--
David CHANIAL - Euro Web SARL - http://www.euro-web.fr
  Location de serveurs dédiés infogérés
  Infogérance et consulting
  Hébergement mutualisé sur mesure
  Serveurs de jeux

--
gentoo-servergentoo.org mailing list


-- 
gentoo-servergentoo.org mailing list