VMware setting

Dear all,
I use VMware workstation 5.5, and I use ADSL to connect to
the internet. I have an IP address on my host machine which
is assigned by my ISP.
I have created a virtual machine for honeywall which has two
bridged network adapter and when host only, and two other
virtual machines: windows and linux respectevely (I followed
the instructions as given by the pakistani alliance).
My problem is that I cannot connect from my guest machines
to the internet.
Could any one who is familliar with VMware to guide me on
how to set it to allow guest machines to access the
internet, and do I need to disable DHCP and NAT that are
already built in or not.
I used static IP adresses for my guest machines which are
different from the IP range given by my ISP, but I guess
they get through the bridged network which uses VMnet0 (my
Ethernet card). 

IMHO we need execute /etc/init.d/cryptdisks AFTER
/etc/init.d/lvm and /etc/init.d/evms at reboot.
Now /etc/init.d/cryptdisks (rc6.d/K48cryptdisks)
executed before (rc6.d/S49lvm and rc6.d/S50evms),
when volumes are in use.




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-REQUESTlists.debian.org
with a subject of "unsubscribe". Trouble?
Contact listmasterlists.debian.org

hi,
    i have the same situation with you. i have a pc connect
to ADSL
modem and setup two vmware pc which network bridged. all
these three
pc could connect to internet and communicate each other
thanks to my
ADSL modem has an LAN function. i think there are many
software
implementation of LAN gateway, google it.

    good luck.


13 Apr 2006 19:55:04 -0000, bendaoudukyahoo.co.uk
<bendaoudukyahoo.co.uk>:
> Dear all,
> I use VMware workstation 5.5, and I use ADSL to connect
to the internet. I have an IP address on my host machine
which is assigned by my ISP.
> I have created a virtual machine for honeywall which
has two bridged network adapter and when host only, and two
other virtual machines: windows and linux respectevely (I
followed the instructions as given by the pakistani
alliance).
> My problem is that I cannot connect from my guest
machines to the internet.
> Could any one who is familliar with VMware to guide me
on how to set it to allow guest machines to access the
internet, and do I need to disable DHCP and NAT that are
already built in or not.
> I used static IP adresses for my guest machines which
are different from the IP range given by my ISP, but I guess
they get through the bridged network which uses VMnet0 (my
Ethernet card).
>


--
http://www.lwang.org
lwang.org provides online base64 encode and decode, crc32
md5 and sha1
hashing, online ciphers, encryption and decryption. We are
engaged in
adding more common use lookup service.
We collect spam for research at abrysonbytefocus.com