WPA issues with 3COM card and Slax

On Wed, Oct 25, 2006 at 12:38:42PM -0700, dyllan dominque
wrote:
> I have a PCMCIA 3COM 3CRPAG175 which is listed as
supported by madwifi.

Which version of the madwifi driver are you using?

> I am using wpa_supplicant 0.3.9 as the newer version
(0.4.8) built for my
> distro (slax) does not have madwifi support.

If you can build a newer version of wpa_supplicant yourself,
I would
recommend testing that.. There have been changes in both
madwifi and
wpa_supplicant and testing with the latest release from
development
branch (0.5.5) could be a good idea..

> Here's my wpa_supplicant.conf (I have also tried with
ap_scan = 0 and 1, and
> without that option)

Can you please send debug log from ap_scan=1 case?

> ctrl_interface=/var/run/wpa_supplicant
> ap_scan=2
> network={
> ssid="JODI"
> proto=WPA
> key_mgmt=WPA-PSK
> group=TKIP
> psk="pass*phrase~Here"
> }

This is invalid configuration. If ap_scan=2, proto,
key_mgmt, group, and
pairwise options must be defined. This example does not set
pairwise.

> proto: 0x1
> key_mgmt: 0x2
> pairwise: 0x8
> group: 0x8

This does not match with the example configuration above..

-- 
Jouni Malinen                                            PGP
id EFC895FA
_______________________________________________
HostAP mailing list
HostAPshmoo.com
http:/
/lists.shmoo.com/mailman/listinfo/hostap