question regarding wpa_supplicant ant Intermec 2101

Hi There

I'm trying to figure out how to setup wpa_supplicant to
authenticate
on an AP Intermec 2101, with the embeded radius server.

That AP supports EAP-TTLS, so I tried to configure my
wpa_supplicant
like this :

ctrl_interface=/var/run/wpa_supplicant

network={
       ssid="example 802.1x network"
       key_mgmt=IEEE8021X
       eap=PEAP
       phase2="auth=MSCHAPV2"
       identity="user name"
       password="password"
       ca_cert="/etc/cert/ca.pem"
}

without any luck. I got off course the ca from Intermec, but
the AP
rejects all the time my logins, offcourse, that AP doesn;t
have much
logs, so I don;'t know what going on.

Btw my client is an handheld device, AML M7100, so it's not
easy to
debug properly.

I'm wondering if I'm the only one who ever tried to bind a
linux
client to an Intermec AP.

Thanks in advance !!
_______________________________________________
HostAP mailing list
HostAPshmoo.com
http:/
/lists.shmoo.com/mailman/listinfo/hostap

On Wed, May 02, 2007 at 04:11:40PM -0400, Johan wrote:

> without any luck. I got off course the ca from
Intermec, but the AP
> rejects all the time my logins, offcourse, that AP
doesn;t have much
> logs, so I don;'t know what going on.
> 
> Btw my client is an handheld device, AML M7100, so it's
not easy to
> debug properly.

Could you please direct the stdout output from
wpa_supplicant into a
file and get that file from the device? (e.g.,
wpa_supplicant -dd -c
w.conf -i wlan0 > /tmp/w.log)

-- 
Jouni Malinen                                            PGP
id EFC895FA
_______________________________________________
HostAP mailing list
HostAPshmoo.com
http:/
/lists.shmoo.com/mailman/listinfo/hostap