Hi,
I am using RP10 SDK to encode a raw audio file. My raw
audio file was
recorded at 8bits/sample, and sample rate at 8000. The
problem is that
the encoder seems only work with either 32kbps or 16kbps
RealAudio voice
codec. With the 8.5, 6.5 or 5 kbps codecs, the encoder just
hang... I
saw the following in the log file:
...
,Diagnostic,SDK Generic Filter,2006/07/11 11:01:22,0,Failed
to get
string: proxyType
,Diagnostic,,2006/07/11 11:01:22,0,Audio pin samples per
second for
queueing = 8000 and max bytes queued = 16000
,Diagnostic,,2006/07/11 11:01:23,0,Audio pin current queue
size = 8000
,Diagnostic,,2006/07/11 11:01:23,0,Audio pin current queue
size = 16000
,Diagnostic,,2006/07/11 11:01:23,0,Audio pin current queue
size = 24000
,Diagnostic,,2006/07/11 11:01:23,0,Audio pin current queue
size = 16000
,Diagnostic,,2006/07/11 11:01:23,0,Audio pin current queue
size = 8000
,Diagnostic,,2006/07/11 11:01:23,0,Wrong size data send to
interleaver
,Diagnostic,,2006/07/11 11:01:24,0,Audio pin current queue
size = 16000
...
,Diagnostic,,2006/07/11 11:01:45,0,Audio pin current queue
size = 0
,Diagnostic,,2006/07/11 11:01:45,0,Audio pin current queue
size = 0
,Warning,Audio Codec,2006/07/11 11:01:45,2001,Audio codec
filter failed
to set accurate end-time
I'd appreciate any help you can provide.
Thanks,
Hau
_______________________________________________
Helix-producer-dev mailing list
Helix-producer-dev helixcommunity.org
http://lists.helixcommunity.org/mailman/listi
nfo/helix-producer-dev
|