odd, .log file would not display, I renamed it to .txt and
it works:
http://www.rakbiz.com/download/RealPush.Net-11-7-2006.T
xt
We are streaming to akamai, I will get detailed server info
as well as the
results with the demo apps later today.
Thanks for your help!
GBY,
-R
On 11/8/06, Sujeet Kharkar <skharkar real.com> wrote:
>
>
> Could you please confirm that you are seeing the same
behavior with sample
> app shipped with producer SDK?
>
> Also can you please attach job file used, RealServer
version that you are
> streaming to and log to bug report. (I am unable to
access
> http://www.rakbiz.com/download/RealPush.Net-11-7-2006.L
og)
>
> Thanks
> Sujeet
>
>
> -----Original Message-----
> From: helix-producer-dev-bounceshelixcommunity.org
> [mailto:helix-producer-dev-bounceshelixcommunity.org] On Behalf Of robert
> bilderbach
> Sent: Wednesday, November 08, 2006 7:21 AM
> To: Jeff Ayars
> Cc: helix-producer-devhelixcommunity.org
> Subject: Re: [Helix-producer-dev] real producer 11
activex problems
> withrembrdcst.dll
>
> I have not even gotten around to sending any events
yet. I am just
> starting
> the encoder and leaving it alone for 1 minute and it
will crash in about
> 30
> seconds.
> I can see the network utilization jumping up to 4% in
task manager for
> about
> 15 seconds, then it drops off and shortly after it
crashes.
>
> I did notice the encoder counter seems to be still
counting until I
> actually
> click the send error to MS.
>
> It does consistently run fine as long as I encode to a
file rather than to
> the network as well as when I load in the v10 SDK.
>
> I turned on all logging levels and captured to a file:
> http://www.rakbiz.com/download/RealPush.Net-11-7-2006.L
og
>
> as well as captured the screen to a .JPG when it
crashes.
> http://www
.rakbiz.com/download/rperror.jpg
>
> Thanks for your help!
> GBY,
> -R
>
>
>
>
> .
>
>
>
> On 11/7/06, Jeff Ayars <jeffareal.com> wrote:
> >
> > At 03:42 PM 11/7/2006, robert bilderbach wrote:
> > >my application does not do anything other than
load a job file and
> start
> > >encoding and allows sending interactive URL
Events.
> > >
> > >1) a menu option that starts the encoder
> > >2) a menu option that stops the encoder
> > >3) a textbox that allows the operator to paste
in a URL link
> > >4) a button that sends the event into the
encoding stream
> >
> > If you comment out adding the event stream and
don't send any events do
> > you
> > get past 30 seconds?
> >
> > I imagine there's an ActiveX sample (not familiar
with the SDK), does it
> > support live encoding and does it stop at 30
seconds?
> >
> > >Thats pretty much it for the core if the
application.
> > >
> > >So I am starting my app,
> > >opening the job file,
> > >starting the encoder process
> > >in about 30 seconds i get the error in
rembrdcst.dll
> >
> > Again, I don't know for sure, but if the source
for rembrdcst.dll is
> > available, can you build a versions with symbols
and let us know the
> line
> > the fault is on? What kind of crash is it?
divide by 0? execute
> > non-executable code? reference memory at 0?
> >
> > JEff
> >
> > >A couple notes:
> > >1) if i encode to a file I get no errors.
> > >2) if I load the v10 sdk it will run forever
fine.
> > >
> > >Any help would be greatly appreciated!
> > >
> > >GBY,
> > >-R
> > >
> > >
> > >On 11/7/06, Robert S. <robertstorreal.com> wrote:
> > >>
> > >>Robert,
> > >>
> > >>You may want to file a bug in the
community outlining what your app
> > >>does, specifically around the 30 seconds
point before the actual
> failure
> > >>occurs. We will have someone look at this
issue and help you narrow
> down
> > >>what the root cause might be.
> > >>
> > >>Regards,
> > >>-Robert
> > >>
> > >>
> > >>
> > >>============
> > >>I wrote an app last year using the activex
and the 10.0.0.545build. It
> > >>worked great, except there is not visuals
;) The 11 was in beta the
> and
> >
> > >>had
> > >>a bug that would not allow me to send
events so we stuck with the 10
> > >>build.
> > >>We have been using it for well over a year
now.
> > >>
> > >>Recently I downloaded the 11.0.0 version
and updated my application to
> > >>include the preview features and it works
great encoding to a file,
> but
> > as
> > >>soon as i add a network broadcast it
crashes after about 30
> > seconds. The
> > >>error report says its an error with:
> > >>ModName: REMBRDCST.DLL
> > >>ModVersion:11.0.0.0
> > >>OffSet:000278a6
> > >>
> > >>I also triied the 11.0.1 build and same
results!
> > >>
> > >>I loaded back the v10 build and it works
fine (no preview of course).
> > >>
> > >>I tried a copy of REMBEDCST.DLL from v10
as well as from the real
> > producer
> > >>10 build and both prevented the crash, but
after about 30 seconds quit
> > >>outputting any network traffic....
> > >>
> > >>
> > >>How do I get this resolved?
> > >>
> > >>Thanks for your help!
> > >>
> > >>GBY,
> > >>-R
> > >>
> >
>>_______________________________________________
> > >>Helix-producer-dev mailing list
> > >>Helix-producer-devhelixcommunity.org
> > >> http://lists.helixcommunity.org/mailman/listi
nfo/helix-producer-dev
> >
>_______________________________________________
> > >Helix-producer-dev mailing list
> > > Helix-producer-devhelixcommunity.org
> > >http://lists.helixcommunity.org/mailman/listi
nfo/helix-producer-dev
> >
> >
> _______________________________________________
> Helix-producer-dev mailing list
> Helix-producer-devhelixcommunity.org
> http://lists.helixcommunity.org/mailman/listi
nfo/helix-producer-dev
>
>
_______________________________________________
Helix-producer-dev mailing list
Helix-producer-devhelixcommunity.org
http://lists.helixcommunity.org/mailman/listi
nfo/helix-producer-dev
|
