Also want to add that, it would be useful if you capture
network traffic and
attach it to the bug report.
Thanks
Sujeet
-----Original Message-----
From: Sujeet Kharkar [mailto:skharkar real.com]
Sent: Wednesday, November 08, 2006 11:05 PM
To: robertrakbiz.com
Cc: helix-producer-devhelixcommunity.org; jeffareal.com
Subject: RE: [Helix-producer-dev] real producer 11 activex
problems
withrembrdcst.dll
Could you please confirm that you are seeing the same
behavior with sample
app shipped with producer SDK?
Also can you please attach job file used, RealServer version
that you are
streaming to and log to bug report. (I am unable to access
http://www.rakbiz.com/download/RealPush.Net-11-7-2006.L
og)
Thanks
Sujeet
-----Original Message-----
From: helix-producer-dev-bounceshelixcommunity.org
[mailto:helix-producer-dev-bounceshelixcommunity.org] On
Behalf Of robert
bilderbach
Sent: Wednesday, November 08, 2006 7:21 AM
To: Jeff Ayars
Cc: helix-producer-devhelixcommunity.org
Subject: Re: [Helix-producer-dev] real producer 11 activex
problems
withrembrdcst.dll
I have not even gotten around to sending any events yet. I
am just starting
the encoder and leaving it alone for 1 minute and it will
crash in about 30
seconds.
I can see the network utilization jumping up to 4% in task
manager for about
15 seconds, then it drops off and shortly after it crashes.
I did notice the encoder counter seems to be still counting
until I actually
click the send error to MS.
It does consistently run fine as long as I encode to a file
rather than to
the network as well as when I load in the v10 SDK.
I turned on all logging levels and captured to a file:
http://www.rakbiz.com/download/RealPush.Net-11-7-2006.L
og
as well as captured the screen to a .JPG when it crashes.
http://www
.rakbiz.com/download/rperror.jpg
Thanks for your help!
GBY,
-R
.
On 11/7/06, Jeff Ayars <jeffareal.com> wrote:
>
> At 03:42 PM 11/7/2006, robert bilderbach wrote:
> >my application does not do anything other than load
a job file and start
> >encoding and allows sending interactive URL Events.
> >
> >1) a menu option that starts the encoder
> >2) a menu option that stops the encoder
> >3) a textbox that allows the operator to paste in a
URL link
> >4) a button that sends the event into the encoding
stream
>
> If you comment out adding the event stream and don't
send any events do
> you
> get past 30 seconds?
>
> I imagine there's an ActiveX sample (not familiar with
the SDK), does it
> support live encoding and does it stop at 30 seconds?
>
> >Thats pretty much it for the core if the
application.
> >
> >So I am starting my app,
> >opening the job file,
> >starting the encoder process
> >in about 30 seconds i get the error in
rembrdcst.dll
>
> Again, I don't know for sure, but if the source for
rembrdcst.dll is
> available, can you build a versions with symbols and
let us know the line
> the fault is on? What kind of crash is it? divide by
0? execute
> non-executable code? reference memory at 0?
>
> JEff
>
> >A couple notes:
> >1) if i encode to a file I get no errors.
> >2) if I load the v10 sdk it will run forever fine.
> >
> >Any help would be greatly appreciated!
> >
> >GBY,
> >-R
> >
> >
> >On 11/7/06, Robert S. <robertstorreal.com> wrote:
> >>
> >>Robert,
> >>
> >>You may want to file a bug in the community
outlining what your app
> >>does, specifically around the 30 seconds point
before the actual failure
> >>occurs. We will have someone look at this issue
and help you narrow down
> >>what the root cause might be.
> >>
> >>Regards,
> >>-Robert
> >>
> >>
> >>
> >>============
> >>I wrote an app last year using the activex and
the 10.0.0.545 build. It
> >>worked great, except there is not visuals ;)
The 11 was in beta the and
>
> >>had
> >>a bug that would not allow me to send events so
we stuck with the 10
> >>build.
> >>We have been using it for well over a year now.
> >>
> >>Recently I downloaded the 11.0.0 version and
updated my application to
> >>include the preview features and it works great
encoding to a file, but
> as
> >>soon as i add a network broadcast it crashes
after about 30
> seconds. The
> >>error report says its an error with:
> >>ModName: REMBRDCST.DLL
> >>ModVersion:11.0.0.0
> >>OffSet:000278a6
> >>
> >>I also triied the 11.0.1 build and same
results!
> >>
> >>I loaded back the v10 build and it works fine
(no preview of course).
> >>
> >>I tried a copy of REMBEDCST.DLL from v10 as
well as from the real
> producer
> >>10 build and both prevented the crash, but
after about 30 seconds quit
> >>outputting any network traffic....
> >>
> >>
> >>How do I get this resolved?
> >>
> >>Thanks for your help!
> >>
> >>GBY,
> >>-R
> >>
> >>_______________________________________________
> >>Helix-producer-dev mailing list
> >>Helix-producer-devhelixcommunity.org
> >> http://lists.helixcommunity.org/mailman/listi
nfo/helix-producer-dev
> >_______________________________________________
> >Helix-producer-dev mailing list
> > Helix-producer-devhelixcommunity.org
> >http://lists.helixcommunity.org/mailman/listi
nfo/helix-producer-dev
>
>
_______________________________________________
Helix-producer-dev mailing list
Helix-producer-devhelixcommunity.org
http://lists.helixcommunity.org/mailman/listi
nfo/helix-producer-dev
_______________________________________________
Helix-producer-dev mailing list
Helix-producer-devhelixcommunity.org
http://lists.helixcommunity.org/mailman/listi
nfo/helix-producer-dev
|
