rme9652 driver vs kernel

hi,

the rme9652 driver has been changed in kernel 2.6.15 to use
the mixer
interface for the hardware monitoring switches. the fact
that this card
has no mixer is probably not worth mentioning at this stage,
but it
means that hardware monitoring in jack will not work with
these cards
post 2.6.14.

i can't think of a way around this for jack, but here's the
patch to
make it work again for affected users (attached).

-- 
nick mainsbridge <beatrootoptushome.com.au>
Beat-Route Media

the rme9652 is not the same card as the hdsp9652.
the rme9652 has no mixer, as i said earlier, and there is no
tool like
hdspmixer for this card.
the end result for users is that they cannot punch in using
ardour and
hear the input signal in certain sensible configurations
(like
monitoring through a mixing desk).

On Sat, 2006-02-04 at 04:10 -0800, Solv (sent by Nabble.com)
wrote:
> So, using the HDSPmixer tool that comes with alsatools
won't get
> around that anyway?  I don't use hardware monitoring
with jack, I just
> monitor via either the spdif out to my mixer or the
adat out to each
> channel.  To be honest I don't actually know what
hardware monitoring
> switch would do for me...it seems I'm monitoring with
my hardware fine
> as it is? 
> 
>
____________________________________________________________
__________
> View this message in context: Re: rme9652 driver vs
kernel
> Sent from the Jackit forum at Nabble.com.
-- 
nick mainsbridge <beatrootoptushome.com.au>
Beat-Route Media



-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep
through log files
for problems?  Stop!  Download the new AJAX search engine
that makes
searching your log files as easy as surfing the  web. 
DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/
sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Jackit-devel mailing list
Jackit-devellists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jackit-dev
el