Others outputs ?

I'm sure there is...

I'll play around, and perhaps one of the other guys can give
you some
pointers, as I don't use my SB card's audio outputs at the
moment.  

I use a Hammerfall card that gives me 16in and 16out in
toslink optical,
which I use via a Digital mixer.

I'll let you know anyway if I see something

-----Original Message-----
From: FERLET Patrice [mailto:P.FERLETalptis.fr] 
Sent: 24 October 2006 10:05
To: Quentin Harley
Subject: RE: [Jackit-devel] Others outputs ?

i tried, but every configuration in qjackctl give me only 2
outputs
alsa_out_pcm_1 (left) and alsa_out_pcm_2 (right)...

In fact, the question could be: is there a way to use jackit
in 5.1? ;)

On Tue, 2006-10-24 at 10:01 +0200, Quentin Harley wrote:
> Hi Patrice,
> 
> If you look in the setup dialog, you'll see an entry
for your hardware
> output device.
> There should be a dropdown list, showing different
configurations of your
> hardware.  One should give you the multichannel outputs
you require.
> 
> (Mine is 0.2)
> 
> Play with these settings, and you should be able to use
your card to the
> best of it's abilities.
> 
> Quentin
> 
> -----Original Message-----
> From: jackit-devel-bounceslists.sourceforge.net
> [mailto:jackit-devel-bounceslists.sourceforge.net] On
Behalf Of FERLET
> Patrice
> Sent: 24 October 2006 09:26
> To: jack-list
> Subject: [Jackit-devel] Others outputs ?
> 
> Hi there
> 
> So, now my jackit server is daily used and i'm
Soooooooo happy to use
> it 
> 
> But i have a question to use jackit with my music band.
> 
> I have a soundblaster 5.1 and alsa shows me several
outputs (alsa -L) as
> rear, front, default, etc...
> With aplay, i can play sounds on different output if i
want... rear,
> front, center... etc...
> 
> But, jackit (in fact, in qjackctl) i only see
alsa_pcm_out 1 and 2...
> 
> How can i have more that this outputs, for example to
use rear where i
> only want to have metronom "click" for a
musician... ?
> 
> The goal is that my musician (drums) could be
synchronized with samples
> played on ardour with metronom. 
> 
> So if you could tell me... it could be very nice.
> 
> I read the alsa documentation, but nothing here helps
me.
> 
> Regards, 
> 
> Patrice (France)
> 
>
------------------------------------------------------------
-------------
> Using Tomcat but need to do more? Need to support web
services, security?
> Get stuff done quickly with pre-integrated technology
to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based
on Apache Geronimo
> http://sel.as-us.falkag.net/
sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Jackit-devel mailing list
> Jackit-devellists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/jackit-dev
el
> 
Patrice Ferlet
Alptis Assurances, Service informatique
N° Direct: 04 72 36 23 47
p.ferletalptis.fr


------------------------------------------------------------
-------------
Using Tomcat but need to do more? Need to support web
services, security?
Get stuff done quickly with pre-integrated technology to
make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on
Apache Geronimo
http://sel.as-us.falkag.net/
sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Jackit-devel mailing list
Jackit-devellists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jackit-dev
el