Setup Slide in Eclipse

That is correct.

Thanks
Pankaj 

-----Original Message-----
From: aslam bari [mailto:iamaslamokyahoo.co.in] 
Sent: Thursday, August 03, 2006 5:34 AM
To: Slide Users Mailing List
Subject: RE: Setup Slide in Eclipse

Do you mean by Build.xml?
  I am new to this era? Plz help me.

"Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)" <pmandalcisco.com>
wrote:
  

I downloaded it from subversion and it was right under slide
directory.

Thanks
Pankaj

-----Original Message-----
From: aslam bari [mailto:iamaslamokyahoo.co.in]
Sent: Thursday, August 03, 2006 4:18 AM
To: Slide Users Mailing List
Subject: RE: Setup Slide in Eclipse

Hello Pankaj
Thanks for reply.

I have downloaded the slide-server-src-2.1. I have
successfully setup
the Tomcat in eclipse and it is running without any
exception. I could
not find the any ant file. Will you plz give me some
guidlines how to
setup "Slide" and debug slide.
Thanks...

"Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)" 

wrote:
Hi Aslam

Try to build your project in eclipse using the ant file that
comes with
slide.

Thanks
Pankaj 

-----Original Message-----
From: aslam bari [mailto:iamaslamokyahoo.co.in]
Sent: Thursday, August 03, 2006 3:44 AM
To: slide-userjakarta.apache.org
Subject: Setup Slide in Eclipse

Dear Users,
I tried a lot but could not be able to setup slide in
eclipse
successfully. i want to debub the slide by using eclipse.
Does any body
help me?


---------------------------------
Here's a new way to find what you're looking for - Yahoo!
Answers 

------------------------------------------------------------
---------
To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
For additional commands, e-mail: slide-user-helpjakarta.apache.org




---------------------------------
Here's a new way to find what you're looking for - Yahoo!
Answers 

------------------------------------------------------------
---------
To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
For additional commands, e-mail: slide-user-helpjakarta.apache.org



 				
---------------------------------
 Here's a new way to find what you're looking for - Yahoo!
Answers 

------------------------------------------------------------
---------
To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
For additional commands, e-mail: slide-user-helpjakarta.apache.org

Hi,
  But i really don't know how to build project by using
Build.xml. Is there is any documentation for this?

"Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)" <pmandalcisco.com> wrote:
  That is correct.

Thanks
Pankaj 

-----Original Message-----
From: aslam bari [mailto:iamaslamokyahoo.co.in] 
Sent: Thursday, August 03, 2006 5:34 AM
To: Slide Users Mailing List
Subject: RE: Setup Slide in Eclipse

Do you mean by Build.xml?
I am new to this era? Plz help me.

"Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)" 

wrote:


I downloaded it from subversion and it was right under slide
directory.

Thanks
Pankaj

-----Original Message-----
From: aslam bari [mailto:iamaslamokyahoo.co.in]
Sent: Thursday, August 03, 2006 4:18 AM
To: Slide Users Mailing List
Subject: RE: Setup Slide in Eclipse

Hello Pankaj
Thanks for reply.

I have downloaded the slide-server-src-2.1. I have
successfully setup
the Tomcat in eclipse and it is running without any
exception. I could
not find the any ant file. Will you plz give me some
guidlines how to
setup "Slide" and debug slide.
Thanks...

"Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)" 

wrote:
Hi Aslam

Try to build your project in eclipse using the ant file that
comes with
slide.

Thanks
Pankaj 

-----Original Message-----
From: aslam bari [mailto:iamaslamokyahoo.co.in]
Sent: Thursday, August 03, 2006 3:44 AM
To: slide-userjakarta.apache.org
Subject: Setup Slide in Eclipse

Dear Users,
I tried a lot but could not be able to setup slide in
eclipse
successfully. i want to debub the slide by using eclipse.
Does any body
help me?


---------------------------------
Here's a new way to find what you're looking for - Yahoo!
Answers 

------------------------------------------------------------
---------
To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
For additional commands, e-mail: slide-user-helpjakarta.apache.org




---------------------------------
Here's a new way to find what you're looking for - Yahoo!
Answers 

------------------------------------------------------------
---------
To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
For additional commands, e-mail: slide-user-helpjakarta.apache.org




---------------------------------
Here's a new way to find what you're looking for - Yahoo!
Answers 

------------------------------------------------------------
---------
To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
For additional commands, e-mail: slide-user-helpjakarta.apache.org



 				
---------------------------------
 Here’s a new way to find what you're looking for - Yahoo!
Answers 

Hi Aslam.  If your goal is to setup slide and have it run in
a
container and debug it via Eclipse, I would recommend you
download the
slide/tomcat bundle (2.1 server Tomcat 5 bundle) from
http://jakarta.apache.org/site/downloads/downloads_
slide.cgi.  Set it
up to run (outside of eclipse).  AFTER you have verified
your
installation works, setup eclipse to use your new tomcat
installation.
 If you are using the sysdeo plugin, it will be a snap.

Once that is done, download the slide source code.  I have
created a
separate project for slide source and just use it as the
source for my
slide jars.

You can then set breakpoints in the slide source code.

IMPORTANT!  Don't just start tomcat via the icon provided
by the
sysdeo plugin!  Create a debug launch profile.  If you start
tomcat
via the start button, your app will not be in debug mode and
will
blast past any breakpoints you have set.

If there is an Eclipse guru on the list (which I am not),
maybe they
can offer some suggestions or correct anything that I have
said that
is wrong or misleading.  I do have Slide running in tomcat
out of
eclipse and I am able to debug slide.

HTH

-Brice


On 8/3/06, aslam bari <iamaslamokyahoo.co.in> wrote:
> Hi,
>   But i really don't know how to build project by
using Build.xml. Is there is any documentation for this?
>
> "Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)" <pmandalcisco.com> wrote:
>   That is correct.
>
> Thanks
> Pankaj
>
> -----Original Message-----
> From: aslam bari [mailto:iamaslamokyahoo.co.in]
> Sent: Thursday, August 03, 2006 5:34 AM
> To: Slide Users Mailing List
> Subject: RE: Setup Slide in Eclipse
>
> Do you mean by Build.xml?
> I am new to this era? Plz help me.
>
> "Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)"
>
> wrote:
>
>
> I downloaded it from subversion and it was right under
slide directory.
>
> Thanks
> Pankaj
>
> -----Original Message-----
> From: aslam bari [mailto:iamaslamokyahoo.co.in]
> Sent: Thursday, August 03, 2006 4:18 AM
> To: Slide Users Mailing List
> Subject: RE: Setup Slide in Eclipse
>
> Hello Pankaj
> Thanks for reply.
>
> I have downloaded the slide-server-src-2.1. I have
successfully setup
> the Tomcat in eclipse and it is running without any
exception. I could
> not find the any ant file. Will you plz give me some
guidlines how to
> setup "Slide" and debug slide.
> Thanks...
>
> "Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)"
>
> wrote:
> Hi Aslam
>
> Try to build your project in eclipse using the ant file
that comes with
> slide.
>
> Thanks
> Pankaj
>
> -----Original Message-----
> From: aslam bari [mailto:iamaslamokyahoo.co.in]
> Sent: Thursday, August 03, 2006 3:44 AM
> To: slide-userjakarta.apache.org
> Subject: Setup Slide in Eclipse
>
> Dear Users,
> I tried a lot but could not be able to setup slide in
eclipse
> successfully. i want to debub the slide by using
eclipse. Does any body
> help me?
>
>
> ---------------------------------
> Here's a new way to find what you're looking for -
Yahoo! Answers
>
>
------------------------------------------------------------
---------
> To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
> For additional commands, e-mail: slide-user-helpjakarta.apache.org
>
>
>
>
> ---------------------------------
> Here's a new way to find what you're looking for -
Yahoo! Answers
>
>
------------------------------------------------------------
---------
> To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
> For additional commands, e-mail: slide-user-helpjakarta.apache.org
>
>
>
>
> ---------------------------------
> Here's a new way to find what you're looking for -
Yahoo! Answers
>
>
------------------------------------------------------------
---------
> To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
> For additional commands, e-mail: slide-user-helpjakarta.apache.org
>
>
>
>
> ---------------------------------
>  Here's a new way to find what you're looking for -
Yahoo! Answers
>

------------------------------------------------------------
---------
To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
For additional commands, e-mail: slide-user-helpjakarta.apache.org

Correction!

I was wrong when I said that you have to use a debug
profile.  You
don't.  You can just fire it up via the launch button.

-Brice

On 8/3/06, Brice Giesbrecht <briceggmail.com> wrote:
> Hi Aslam.  If your goal is to setup slide and have it
run in a
> container and debug it via Eclipse, I would recommend
you download the
> slide/tomcat bundle (2.1 server Tomcat 5 bundle) from
> http://jakarta.apache.org/site/downloads/downloads_
slide.cgi.  Set it
> up to run (outside of eclipse).  AFTER you have
verified your
> installation works, setup eclipse to use your new
tomcat installation.
>  If you are using the sysdeo plugin, it will be a snap.
>
> Once that is done, download the slide source code.  I
have created a
> separate project for slide source and just use it as
the source for my
> slide jars.
>
> You can then set breakpoints in the slide source code.
>
> IMPORTANT!  Don't just start tomcat via the icon
provided by the
> sysdeo plugin!  Create a debug launch profile.  If you
start tomcat
> via the start button, your app will not be in debug
mode and will
> blast past any breakpoints you have set.
>
> If there is an Eclipse guru on the list (which I am
not), maybe they
> can offer some suggestions or correct anything that I
have said that
> is wrong or misleading.  I do have Slide running in
tomcat out of
> eclipse and I am able to debug slide.
>
> HTH
>
> -Brice
>
>
> On 8/3/06, aslam bari <iamaslamokyahoo.co.in> wrote:
> > Hi,
> >   But i really don't know how to build project by
using Build.xml. Is there is any documentation for this?
> >
> > "Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)" <pmandalcisco.com> wrote:
> >   That is correct.
> >
> > Thanks
> > Pankaj
> >
> > -----Original Message-----
> > From: aslam bari [mailto:iamaslamokyahoo.co.in]
> > Sent: Thursday, August 03, 2006 5:34 AM
> > To: Slide Users Mailing List
> > Subject: RE: Setup Slide in Eclipse
> >
> > Do you mean by Build.xml?
> > I am new to this era? Plz help me.
> >
> > "Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)"
> >
> > wrote:
> >
> >
> > I downloaded it from subversion and it was right
under slide directory.
> >
> > Thanks
> > Pankaj
> >
> > -----Original Message-----
> > From: aslam bari [mailto:iamaslamokyahoo.co.in]
> > Sent: Thursday, August 03, 2006 4:18 AM
> > To: Slide Users Mailing List
> > Subject: RE: Setup Slide in Eclipse
> >
> > Hello Pankaj
> > Thanks for reply.
> >
> > I have downloaded the slide-server-src-2.1. I have
successfully setup
> > the Tomcat in eclipse and it is running without
any exception. I could
> > not find the any ant file. Will you plz give me
some guidlines how to
> > setup "Slide" and debug slide.
> > Thanks...
> >
> > "Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)"
> >
> > wrote:
> > Hi Aslam
> >
> > Try to build your project in eclipse using the ant
file that comes with
> > slide.
> >
> > Thanks
> > Pankaj
> >
> > -----Original Message-----
> > From: aslam bari [mailto:iamaslamokyahoo.co.in]
> > Sent: Thursday, August 03, 2006 3:44 AM
> > To: slide-userjakarta.apache.org
> > Subject: Setup Slide in Eclipse
> >
> > Dear Users,
> > I tried a lot but could not be able to setup slide
in eclipse
> > successfully. i want to debub the slide by using
eclipse. Does any body
> > help me?
> >
> >
> > ---------------------------------
> > Here's a new way to find what you're looking for
- Yahoo! Answers
> >
> >
------------------------------------------------------------
---------
> > To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
> > For additional commands, e-mail:
slide-user-helpjakarta.apache.org
> >
> >
> >
> >
> > ---------------------------------
> > Here's a new way to find what you're looking for
- Yahoo! Answers
> >
> >
------------------------------------------------------------
---------
> > To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
> > For additional commands, e-mail:
slide-user-helpjakarta.apache.org
> >
> >
> >
> >
> > ---------------------------------
> > Here's a new way to find what you're looking for
- Yahoo! Answers
> >
> >
------------------------------------------------------------
---------
> > To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
> > For additional commands, e-mail:
slide-user-helpjakarta.apache.org
> >
> >
> >
> >
> > ---------------------------------
> >  Here's a new way to find what you're looking
for - Yahoo! Answers
> >
>

------------------------------------------------------------
---------
To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
For additional commands, e-mail: slide-user-helpjakarta.apache.org

Thanks Brice,
   
  I have successfully setup the slide/Tomcat bundle which
you have told me. Then i made a new tomcat project and add
slide source to it, but it does not stop on the break point.
Also there is a exception comes, (Unavailable Exception)
JDOMException class. Yet it is availble in the slide as
slie-jdom.1 jar. I think there is something wrong when i am
integrating slide source to project. Plz give me direction
how to attach slide source to NewTomcatProject.
   
  Thanks..

Brice Giesbrecht <briceggmail.com> wrote:
  Hi Aslam. If your goal is to setup slide and have it run
in a
container and debug it via Eclipse, I would recommend you
download the
slide/tomcat bundle (2.1 server Tomcat 5 bundle) from
http://jakarta.apache.org/site/downloads/downloads_
slide.cgi. Set it
up to run (outside of eclipse). AFTER you have verified your
installation works, setup eclipse to use your new tomcat
installation.
If you are using the sysdeo plugin, it will be a snap.

Once that is done, download the slide source code. I have
created a
separate project for slide source and just use it as the
source for my
slide jars.

You can then set breakpoints in the slide source code.

IMPORTANT! Don't just start tomcat via the icon provided by
the
sysdeo plugin! Create a debug launch profile. If you start
tomcat
via the start button, your app will not be in debug mode and
will
blast past any breakpoints you have set.

If there is an Eclipse guru on the list (which I am not),
maybe they
can offer some suggestions or correct anything that I have
said that
is wrong or misleading. I do have Slide running in tomcat
out of
eclipse and I am able to debug slide.

HTH

-Brice


On 8/3/06, aslam bari wrote:
> Hi,
> But i really don't know how to build project by using
Build.xml. Is there is any documentation for this?
>
> "Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)" 
wrote:
> That is correct.
>
> Thanks
> Pankaj
>
> -----Original Message-----
> From: aslam bari [mailto:iamaslamokyahoo.co.in]
> Sent: Thursday, August 03, 2006 5:34 AM
> To: Slide Users Mailing List
> Subject: RE: Setup Slide in Eclipse
>
> Do you mean by Build.xml?
> I am new to this era? Plz help me.
>
> "Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)"
>
> wrote:
>
>
> I downloaded it from subversion and it was right under
slide directory.
>
> Thanks
> Pankaj
>
> -----Original Message-----
> From: aslam bari [mailto:iamaslamokyahoo.co.in]
> Sent: Thursday, August 03, 2006 4:18 AM
> To: Slide Users Mailing List
> Subject: RE: Setup Slide in Eclipse
>
> Hello Pankaj
> Thanks for reply.
>
> I have downloaded the slide-server-src-2.1. I have
successfully setup
> the Tomcat in eclipse and it is running without any
exception. I could
> not find the any ant file. Will you plz give me some
guidlines how to
> setup "Slide" and debug slide.
> Thanks...
>
> "Pankaj Mandal -X (pmandal - Ahura Inc. at
Cisco)"
>
> wrote:
> Hi Aslam
>
> Try to build your project in eclipse using the ant file
that comes with
> slide.
>
> Thanks
> Pankaj
>
> -----Original Message-----
> From: aslam bari [mailto:iamaslamokyahoo.co.in]
> Sent: Thursday, August 03, 2006 3:44 AM
> To: slide-userjakarta.apache.org
> Subject: Setup Slide in Eclipse
>
> Dear Users,
> I tried a lot but could not be able to setup slide in
eclipse
> successfully. i want to debub the slide by using
eclipse. Does any body
> help me?
>
>
> ---------------------------------
> Here's a new way to find what you're looking for -
Yahoo! Answers
>
>
------------------------------------------------------------
---------
> To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
> For additional commands, e-mail: slide-user-helpjakarta.apache.org
>
>
>
>
> ---------------------------------
> Here's a new way to find what you're looking for -
Yahoo! Answers
>
>
------------------------------------------------------------
---------
> To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
> For additional commands, e-mail: slide-user-helpjakarta.apache.org
>
>
>
>
> ---------------------------------
> Here's a new way to find what you're looking for -
Yahoo! Answers
>
>
------------------------------------------------------------
---------
> To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
> For additional commands, e-mail: slide-user-helpjakarta.apache.org
>
>
>
>
> ---------------------------------
> Here's a new way to find what you're looking for -
Yahoo! Answers
>

------------------------------------------------------------
---------
To unsubscribe, e-mail: slide-user-unsubscribejakarta.apache.org
For additional commands, e-mail: slide-user-helpjakarta.apache.org



 				
---------------------------------
 Here’s a new way to find what you're looking for - Yahoo!
Answers