Hi,
I have configured multiple VRs within an ERX and I'm trying
to
proxy traps from one VR to VR default which has access to
the management
network. I am able tot see traps generated by an event on
the default VR
but when an SNMP traps is generated on another VR I can't
see it going
to the management network.
On the default VR I enabled the snmp proxy feature and set
the
trapfilter to the same level than all the other VRs and also
enable trap
sending for the same categories, I also put the same
destination. Is
there any special command to do that on the default VR and
on the other
one, I'm I missing anything ?
Any advice would be appreciated thanks in advance.
Regards
David
_______________________________________________
juniper-nsp mailing list juniper-nsp puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
|