If the ERX is a LAC you only need the BRAS/IP (SA
Subscriber-Access)
license.
The L2TP session is in the same way counted as a PPP/PPPoE
session on
the LAC.
If the ERX is a LNS then you need an additional license for
the LNS
functionaliy.
You do not need a license for L2TP on the LAC.
The ERX supports 16.000 L2TP session and 8000 L2TP tunnels
on the
ERX310, 700er and 1410.
The ERX 1440 supports 32.000 session and 8.000 tunnels.
The E320 supports 32.000 sessions and 16.000 tunnels
Gruss
Bernd.
> -----Original Message-----
> From: juniper-nsp-bounces puck.nether.net
> [mailto:juniper-nsp-bounces puck.nether.net] On Behalf
Of
> sanjeev singh
> Sent: Friday, December 01, 2006 23:43
> To: juniper-nsp puck.nether.net
> Subject: [j-nsp] L2TP License Juniper BRAS
>
> Hi,
>
> Can any1 tell me do u need any license on ERX/BRAS for
> creating L2TP tunnels as the box by default support
1600 ,
> but do u require any other license like edge , BRAS
license ??
>
> Thanks & Regards.
> S K
>
>
>
>
____________________________________________________________
__
> ______________________
> Yahoo! Music Unlimited
> Access over 1 million songs.
> http://music.yahoo.c
om/unlimited
> _______________________________________________
> juniper-nsp mailing list juniper-nsp puck.nether.net
>
https://puck.nether.net/mailman/listinfo/juniper-nsp
>
_______________________________________________
juniper-nsp mailing list juniper-nsp puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
|