Hi,
I'm having a problem sending packets >230 bytes to a
pppoa subscriber
interface.
Pinging the subscriber from the ERX310 box with a data-size
lower then 230
works fine, but above it drops all the packets.
This is not just for icmp packets but for all data packets.
(So subscriber
is unable to surf the net).
The subscriber is provisioned through bulk-config. some
stats:
Interface ATM-Prot VCD VPI VCI Type Encap MTU Status
Type
--------- -------- --- --- --- ------- ----- ---- ------
---------
ATM 2/0.1 RFC-1483 3 1 99 PVC AUTO 9180 up
Dynamic
There is an AccIntern route to the customer:
Prefix/Length Type Next Hop Dst/Met
Interface
a.b.c.d/32 AccIntern 0.0.0.0 2/0
ATM2/0.1
The dynamic ppp profile sets the Administrative MTU to
1500.
I'm looking for hints on where to look for with this
problem.
Thanks in advance,
Richard
_______________________________________________
juniper-nsp mailing list juniper-nsp puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
|
