List Info

Thread: Specifying values dynamically using pre section




Specifying values dynamically using pre section
user name
2006-09-06 16:53:22
Jesse,
      That worked, your a life saver.  Thanks a million.
so ksdevice = link in boot parms and no device in kickstart
file.

Now If I can get SuSE working?



Wednesday, September 06, 2006 11:11 AM
To: kickstart-listredhat.com
cc:
From: Jesse Keating <jkeatingj2solutions.net>
Subject: Re: Specifying values dynamically using pre section


On Wednesday 06 September 2006 11:57, Tom Miller wrote:
> Jesse,
> The ksdevice=link did  work with this RHEL5 beta1
version of netboot.img!
> It was able to
> configure the right nic card and nfs mount the server
to fetch the
> kickstart file.  But then
> with this in the kickstart file :
> network --device link --bootproto static --ip
9.3.22.109 --netmask
> 255.255.255.128 --gateway 9.3.22.1 --nameserver 9.0.7.1
--hostname
> sift22109.austin.ibm.com
>
> anacondo could not configure the right nic card:  When
it tried the nfs
> mount to the install
> image dir it failed:

Hrm, What if you don't specify the device?

--
Jesse Keating RHCE      (geek.j2solutions.net)
Fedora Legacy Team      (www.fedoralegacy.org)
GPG Public Key         
(geek.j2solutions.net/jkeating.j2solutions.pub
(See attached file: C.DTF)
_______________________________________________
Kickstart-list mailing list
Kickstart-listredhat.com
https://www.redhat.com/mailman/listinfo/kickstart-list


_______________________________________________
Kickstart-list mailing list
Kickstart-listredhat.com
https://www.redhat.com/mailman/listinfo/kickstart-list

Specifying values dynamically using pre section
user name
2006-09-06 16:55:22
ksdevice=mac_addr was added in RHEL3U7 and RHEL4U3 

-----Original Message-----
From: kickstart-list-bouncesredhat.com
[mailto:kickstart-list-bouncesredhat.com] On Behalf Of
Tom Miller
Sent: Wednesday, September 06, 2006 9:53 AM
To: Discussion list about Kickstart
Subject: Re: Specifying values dynamically using pre section

Jesse,
      That worked, your a life saver.  Thanks a million.
so ksdevice = link in boot parms and no device in kickstart
file.

Now If I can get SuSE working?



Wednesday, September 06, 2006 11:11 AM
To: kickstart-listredhat.com
cc:
From: Jesse Keating <jkeatingj2solutions.net>
Subject: Re: Specifying values dynamically using pre section


On Wednesday 06 September 2006 11:57, Tom Miller wrote:
> Jesse,
> The ksdevice=link did  work with this RHEL5 beta1
version of netboot.img!
> It was able to
> configure the right nic card and nfs mount the server
to fetch the 
> kickstart file.  But then with this in the kickstart
file :
> network --device link --bootproto static --ip
9.3.22.109 --netmask
> 255.255.255.128 --gateway 9.3.22.1 --nameserver 9.0.7.1
--hostname 
> sift22109.austin.ibm.com
>
> anacondo could not configure the right nic card:  When
it tried the 
> nfs mount to the install image dir it failed:

Hrm, What if you don't specify the device?

--
Jesse Keating RHCE      (geek.j2solutions.net)
Fedora Legacy Team      (www.fedoralegacy.org)
GPG Public Key         
(geek.j2solutions.net/jkeating.j2solutions.pub
(See attached file: C.DTF)
_______________________________________________
Kickstart-list mailing list
Kickstart-listredhat.com
https://www.redhat.com/mailman/listinfo/kickstart-list


_______________________________________________
Kickstart-list mailing list
Kickstart-listredhat.com
https://www.redhat.com/mailman/listinfo/kickstart-list

_______________________________________________
Kickstart-list mailing list
Kickstart-listredhat.com
https://www.redhat.com/mailman/listinfo/kickstart-list

[1-2]

about | contact  Other archives ( Real Estate discussion Medical topics )