Kolab install on Gentoo - error "Couldn't download 'framework-HEAD-2007-07-01.tar.gz'"

Whilst attempting to install the Gentoo native version of
Kolab I have 
run into an error whilst emerging kolabd, the error reported
is

 >>> Downloading 
'http://ftp.horde.org/pub/snaps/2007-07
-01/framework-HEAD-2007-07-01.tar.gz'
--10:49:51-- 
http://ftp.horde.org/pub/snaps/2007-07
-01/framework-HEAD-2007-07-01.tar.gz
            =>
`/usr/portage/distfiles/framework-HEAD-2007-07-01.tar.gz'
Resolving ftp.horde.org... 200.46.204.201
Connecting to ftp.horde.org|200.46.204.201|:80...
connected.
HTTP request sent, awaiting response... 404 Not Found
10:49:52 ERROR 404: Not Found.

!!! Couldn't download 'framework-HEAD-2007-07-01.tar.gz'.
Aborting.

I checked on the ftp server and right enough the directory 
/pub/snaps/2007-07-01/ doesn't exist, instead there are a
number of 
others (which clearly correlate with the date). Just
wondering which 
directory I should be looking for instead, is it advisable
to use the 
latest?

In addition I'm curious as to why the horde framework is
being installed 
as I haven't set the horde use flag for kolabd, just spam
and webdav 
useflags.

[ebuild  N    ] net-mail/kolabd-2.1  USE="spam webdav
-horde -legacy 
-mailman" 153 kB [1]

Had attempted to include horde earlier but due to masking
and keywords 
problems I decided to leave that for another time.

-- 

Charles Dand

Penguin Factory Ltd
www.penguinfactory.co.uk
Tel:0845 868 3988

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users

Hi Charles,

Charles Dand <charles.dandpenguinfactory.co.uk>
writes:

> Whilst attempting to install the Gentoo native version
of Kolab I have 
> run into an error whilst emerging kolabd, the error
reported is
>
>  >>> Downloading 
> 'http://ftp.horde.org/pub/snaps/2007-07
-01/framework-HEAD-2007-07-01.tar.gz'
> --10:49:51-- 
> http://ftp.horde.org/pub/snaps/2007-07
-01/framework-HEAD-2007-07-01.tar.gz
>             =>
`/usr/portage/distfiles/framework-HEAD-2007-07-01.tar.gz'
> Resolving ftp.horde.org... 200.46.204.201
> Connecting to ftp.horde.org|200.46.204.201|:80...
connected.
> HTTP request sent, awaiting response... 404 Not Found
> 10:49:52 ERROR 404: Not Found.
>
> !!! Couldn't download
'framework-HEAD-2007-07-01.tar.gz'. Aborting.
>
> I checked on the ftp server and right enough the
directory 
> /pub/snaps/2007-07-01/ doesn't exist, instead there are
a number of 
> others (which clearly correlate with the date). Just
wondering which 
> directory I should be looking for instead, is it
advisable to use the 
> latest?

this is a problem of the way I currently built the horde
ebuilds. They
are snapshot based and the snapshots are only available for
a week. So
I am forced to upgrade every week but right now I have been
extremely
short on time so that I was unable to keep the deadline  I'll try
to
fix it tonight.

> In addition I'm curious as to why the horde framework
is being installed 
> as I haven't set the horde use flag for kolabd, just
spam and webdav 
> useflags.

The horde-framework package provides a number of basic
libraries that
are used by both the kolab-resource-handlers and the
kolab-webadmin. This will always be installed independent of
the
"horde" use flag.

Cheers,

Gunnar


-- 
____ http://www.pardus.de
_________________ http://gunnarwrobel.de _

    >> Mail at ease - Rent a kolab groupware server at
prdus <<

prdus Kolab work is funded in part by KDAB and the
Kolab Konsortium

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users

Gunnar Wrobel wrote:
> Hi Charles,
> 
> Charles Dand <charles.dandpenguinfactory.co.uk>
writes:
> 
>> Whilst attempting to install the Gentoo native
version of Kolab I have 
>> run into an error whilst emerging kolabd, the error
reported is
>>
>> !!! Couldn't download
'framework-HEAD-2007-07-01.tar.gz'. Aborting.
>>
>> I checked on the ftp server and right enough the
directory 
>> /pub/snaps/2007-07-01/ doesn't exist, instead there
are a number of 
>> others (which clearly correlate with the date).
Just wondering which 
>> directory I should be looking for instead, is it
advisable to use the 
>> latest?
> 
> this is a problem of the way I currently built the
horde ebuilds. They
> are snapshot based and the snapshots are only available
for a week. So
> I am forced to upgrade every week but right now I have
been extremely
> short on time so that I was unable to keep the deadline
 I'll
try to
> fix it tonight.

Hi Gunnar,

Just wondering if there was any news on this. I can see that
you've been 
busy with a lot of other changes so I can understand if this
is 
something that is at the back of a long list.

Out of curiosity once you've changed things how is best to
update an 
overlayed portage, is it necessary to run

# layman -S

or will and emerge --sync update the overlay? Sorry haven't
had much 
experience with Gentoo overlays.

Cheers

-- 

Charles Dand

Penguin Factory Ltd
www.penguinfactory.co.uk
Tel:0845 868 3988

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users

Charles Dand <charles.dandpenguinfactory.co.uk>
writes:

> Gunnar Wrobel wrote:
>> Hi Charles,
>> 
>> Charles Dand <charles.dandpenguinfactory.co.uk>
writes:
>> 
>>> Whilst attempting to install the Gentoo native
version of Kolab I have 
>>> run into an error whilst emerging kolabd, the
error reported is
>>>
>>> !!! Couldn't download
'framework-HEAD-2007-07-01.tar.gz'. Aborting.
>>>
>>> I checked on the ftp server and right enough
the directory 
>>> /pub/snaps/2007-07-01/ doesn't exist, instead
there are a number of 
>>> others (which clearly correlate with the date).
Just wondering which 
>>> directory I should be looking for instead, is
it advisable to use the 
>>> latest?
>> 
>> this is a problem of the way I currently built the
horde ebuilds. They
>> are snapshot based and the snapshots are only
available for a week. So
>> I am forced to upgrade every week but right now I
have been extremely
>> short on time so that I was unable to keep the
deadline  I'll try
to
>> fix it tonight.
>
> Hi Gunnar,
>
> Just wondering if there was any news on this. I can see
that you've been 
> busy with a lot of other changes so I can understand if
this is 
> something that is at the back of a long list.

Sorry for the delay. I was able to fix it today and I fixed
it in a
way so that it does not happen in a week again.

> Out of curiosity once you've changed things how is best
to update an 
> overlayed portage, is it necessary to run
>
> # layman -S

Yes, that is what I do with the overlays I use in my
systems. They get
synced like this every night.

> or will and emerge --sync update the overlay? Sorry
haven't had much 
> experience with Gentoo overlays.

"emerge --sync" will only update the normal
portage tree. Eventually
portage should gain the capabilities to also sync overlays
but it does
not have it yet. Maybe paludis can already do this. I'm not
certain.

Cheers,

Gunnar

-- 
____ http://www.pardus.de
_________________ http://gunnarwrobel.de _

    >> Mail at ease - Rent a kolab groupware server at
prdus <<

prdus Kolab work is funded in part by KDAB and the
Kolab Konsortium

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users