Apache does not start

Hello,

I'm currently trying to get the kolab server up and running
on my opensuse 10.2 box.
I followed the instructions from the howto on the opensuse
website (http://en.opensuse.org/K
olab).

But when i tried to start the kolab server, i got this error
message:

Starting httpd2 (prefork) Syntax error on line 37 of
/etc/apache2/conf.d/kolab.conf:
Invalid command 'SSLRequireSSL', perhaps misspelled or
defined by a module not included in the server
configuration

The command line was:
/usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf -DSSL
                                                            
        failed
ERROR: /etc/init.d/apache2 start failed
Run: /usr/sbin/kolab rc all stop
to stop all services

Any ideas how to solve this?

Thanks a lot
Lukasz

____________________________________________________________
___________
Jetzt neu! Schützen Sie Ihren PC mit McAfee und WEB.DE. 3
Monate
kostenlos testen. http://www.pc-sicherheit.web.de/startseite/?mc=022220

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users

Hi Lukasz,

l.klekotweb.de writes:

> Hello,
>
> I'm currently trying to get the kolab server up and
running on my opensuse 10.2 box.
> I followed the instructions from the howto on the
opensuse website (http://en.opensuse.org/K
olab).
>
> But when i tried to start the kolab server, i got this
error message:
>
> Starting httpd2 (prefork) Syntax error on line 37 of
/etc/apache2/conf.d/kolab.conf:
> Invalid command 'SSLRequireSSL', perhaps misspelled or
defined by a module not included in the server
configuration
>
> The command line was:
> /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf
-DSSL
>                                                        
             failed
> ERROR: /etc/init.d/apache2 start failed
> Run: /usr/sbin/kolab rc all stop
> to stop all services
>
> Any ideas how to solve this?

I don't have much of a clue about the Apache on OpenSUSE but
the error
message means that the SSL module was not activated in your
case. I
assume that the -DSSL switch is supposed to do that, but
without
knowing how your Apache is configured, I am unable to tell
what
exactly fails here.

Just as a note: the Kolab server has significantly better
support for
the OpenPKG platform. If you are using one of the native
versions you
usually will have to have in-depth knowledge of how to
handle postfix,
cyrus imap, slapd, amavis and apache.

I'm not saying this to discredit the native versions - as I
am also
maintainer of the native Gentoo port  - but in
general the Kolab
experience will be more enjoyable on OpenPKG.

Cheers,

Gunnar

-- 
______ http://kdab.com
_______________ http://kolab-konsortium.c
om _

prdus Kolab work is funded in part by KDAB and the
Kolab Konsortium

____ http://www.pardus.de
_________________ http://gunnarwrobel.de _
E-mail : prdus.de                                 Dr. Gunnar
Wrobel
Tel.   : +49 40 432 72335                          
Bundesstrasse 29
Fax    : +49 40 432 70855                            D-20146
Hamburg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~
   >> Mail at ease - Rent a kolab groupware server at
prdus <<                 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users

Hi,

Gunnar thanks for picking up the email, I did not notice
that it was for 
opensuse...

Op woensdag 15 augustus 2007 13:25, schreef l.klekotweb.de:
> Hello,
>
> I'm currently trying to get the kolab server up and
running on my opensuse
> 10.2 box. I followed the instructions from the howto on
the opensuse
> website (http://en.opensuse.org/K
olab).
>
> But when i tried to start the kolab server, i got this
error message:
>
> Starting httpd2 (prefork) Syntax error on line 37 of
> /etc/apache2/conf.d/kolab.conf: Invalid command
'SSLRequireSSL', perhaps
> misspelled or defined by a module not included in the
server configuration
>
> The command line was:
> /usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf
-DSSL
>                                                        
             failed
> ERROR: /etc/init.d/apache2 start failed
> Run: /usr/sbin/kolab rc all stop
> to stop all services
>
> Any ideas how to solve this?

What do you have in the variable APACHE_SERVER_FLAGS 
in /etc/sysconfig/apache2, there should only be:
APACHE_SERVER_FLAGS="SSL "

Which is about this line:
Also add the flag "SSL" to the APACHE_SERVER_FLAGS
variable 
in /etc/sysconfig/apache2 file
on the webpage http://en.opensuse.org/K
olab

-- 
Richard Bos
Without a home the journey is endless

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users