List Info

Thread: Kolab doesn't alow to send e-mail from outside the network
Kolab doesn't alow to send e-mail from outside the network
country flaguser name
United States		 2007-09-09 09:55:02 
Kolab doesn't allow to send e-mail from outside the network
The setup is that sasl_authenticated should be allowed to
send e-mail from 
outside the local network.
However I am being asked for the password in an infinite
loop. It seems that 
the sasl path may not be correct


-- 
Thomas Spuhler

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users
Re: Kolab doesn't alow to send e-mail from outside the network
user name
 2007-09-09 13:23:09 
On 9/9/07, Thomas Spuhler <thomasbtspuhler.com> wrote:
> Kolab doesn't allow to send e-mail from outside the
network
> The setup is that sasl_authenticated should be allowed
to send e-mail from
> outside the local network.
It is!
> However I am being asked for the password in an
infinite loop. It seems that
> the sasl path may not be correct

The error reported by postfix in the log could help us a lot


Did you allowed

>
>
> --
> Thomas Spuhler
>
> _______________________________________________
> Kolab-users mailing list
> Kolab-userskolab.org
> https:
//kolab.org/mailman/listinfo/kolab-users
>


-- 
Alain Spineux
aspineux gmail com
May the sources be with you

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users
Kolab doesn't alow to send e-mail from outside the network
country flaguser name
United States		 2007-09-09 23:44:03 
On Sunday 09 September 2007 11:23, Alain Spineux wrote:
> On 9/9/07, Thomas Spuhler <thomasbtspuhler.com> wrote:
> > Kolab doesn't allow to send e-mail from outside
the network
> > The setup is that sasl_authenticated should be
allowed to send e-mail
> > from outside the local network.
>
> It is!
>
> > However I am being asked for the password in an
infinite loop. It seems
> > that the sasl path may not be correct
>
> The error reported by postfix in the log could help us
a lot 
>
> Did you allowed
>
> > --
> > Thomas Spuhler
> >
> > _______________________________________________
> > Kolab-users mailing list
> > Kolab-userskolab.org
> > https:
//kolab.org/mailman/listinfo/kolab-users

I did use authentication from inside just to get the error
log (easier than go 
outside), I don't need them from the internal network:

>From  /var/log/mail/info.log

Sep  9 21:35:00 aargau postfix/smtpd[10336]: connection
established
Sep  9 21:35:00 aargau postfix/smtpd[10336]: master_notify:
status 0
Sep  9 21:35:00 aargau postfix/smtpd[10336]: name_mask:
resource
Sep  9 21:35:00 aargau postfix/smtpd[10336]: name_mask:
software
Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_create: SASL 
service=smtp, realm=(null)
Sep  9 21:35:00 aargau postfix/smtpd[10336]: name_mask:
noanonymous
Sep  9 21:35:00 aargau postfix/smtpd[10336]: connect from 
aargau.btspuhler.com[127.0.0.1]
Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 
aargau.btspuhler.com: no match
Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 127.0.0.1: no 
match
Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 
aargau.btspuhler.com: no match
Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 127.0.0.1: no 
match
Sep  9 21:35:00 aargau postfix/smtpd[10336]: send attr
request = seed
Sep  9 21:35:00 aargau postfix/smtpd[10336]: send attr size
= 32
Sep  9 21:35:00 aargau postfix/smtpd[10336]: private/tlsmgr:
wanted attribute: 
status
Sep  9 21:35:00 aargau postfix/smtpd[10336]: input attribute
name: status
Sep  9 21:35:00 aargau postfix/smtpd[10336]: input attribute
value: 0
Sep  9 21:35:00 aargau postfix/smtpd[10336]: private/tlsmgr:
wanted attribute: 
seed
Sep  9 21:35:00 aargau postfix/smtpd[10336]: input attribute
name: seed
Sep  9 21:35:00 aargau postfix/smtpd[10336]: input attribute
value: 
xXhiDtFxRCWVc0zl45K3+1na8rpR5nQwaN2riOYxk=
Sep  9 21:35:00 aargau postfix/smtpd[10336]: private/tlsmgr:
wanted attribute: 
(list terminator)
Sep  9 21:35:00 aargau postfix/smtpd[10336]: input attribute
name: (end)
Sep  9 21:35:00 aargau postfix/smtpd[10336]: match_hostname:

aargau.btspuhler.com ~? 127.0.0.0/8
Sep  9 21:35:00 aargau postfix/smtpd[10336]: match_hostaddr:
127.0.0.1 ~? 
127.0.0.0/8
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 220 aargau.btspuhler.com
ESMTP Postfix
Sep  9 21:35:00 aargau postfix/smtpd[10336]: < 
aargau.btspuhler.com[127.0.0.1]: EHLO aargau.btspuhler.com
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 250-aargau.btspuhler.com
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 250-PIPELINING
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 250-SIZE 5000000
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 250-VRFY
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 250-ETRN
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 250-AUTH GSSAPI CRAM-MD5
DIGEST-MD5 LOGIN 
PLAIN
Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 
aargau.btspuhler.com: no match
Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 127.0.0.1: no 
match
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 250-AUTH=GSSAPI CRAM-MD5
DIGEST-MD5 LOGIN 
PLAIN
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 250-ENHANCEDSTATUSCODES
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 250-8BITMIME
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 250 DSN
Sep  9 21:35:00 aargau postfix/smtpd[10336]: < 
aargau.btspuhler.com[127.0.0.1]: AUTH PLAIN 
dGhvbWFzQGJ0c3B1aGxlci5jAdGhvbWFzQGJ0c3B1aGxlci5jb20AYnJ1bm8
1MA==
Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_first: 
sasl_method PLAIN, init_response 
dGhvbWFzQGJ0c3B1aGxlci5jAdGhvbWFzQGJ0c3B1aGxlci5jb20AYnJ1bm8
1MA==
Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_first: decoded 
initial response thomasbtspuhler.com
Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
aargau.btspuhler.com[127.0.0.1]: 535 5.7.0 Error:
authentication failed: 
authentication failure
Sep  9 21:35:00 aargau postfix/smtpd[10336]: smtp_get: EOF
Sep  9 21:35:00 aargau postfix/smtpd[10336]: match_hostname:

aargau.btspuhler.com ~? 127.0.0.0/8
Sep  9 21:35:00 aargau postfix/smtpd[10336]: match_hostaddr:
127.0.0.1 ~? 
127.0.0.0/8
Sep  9 21:35:00 aargau postfix/smtpd[10336]: lost connection
after AUTH from 
aargau.btspuhler.com[127.0.0.1]
Sep  9 21:35:00 aargau postfix/smtpd[10336]: disconnect from

aargau.btspuhler.com[127.0.0.1]
Sep  9 21:35:00 aargau postfix/smtpd[10336]: master_notify:
status 1
Sep  9 21:35:00 aargau postfix/smtpd[10336]: connection
closed

and from /var/log/auth.log
Sep  9 21:38:29 aargau postfix/smtpd[10396]: auxpropfunc
error invalid 
parameter supplied 
Sep  9 21:38:29 aargau postfix/smtpd[10396]:
_sasl_plugin_load failed on 
sasl_auxprop_plug_init for plugin: ldapdb 


I altered the passwords slightly
-- 

Thomas Spuhler

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users
Re: Kolab doesn't alow to send e-mail from outside the network
country flaguser name
Germany		 2007-09-10 00:15:30 
Thomas Spuhler <thomasbtspuhler.com> writes:

> On Sunday 09 September 2007 11:23, Alain Spineux
wrote:
>> On 9/9/07, Thomas Spuhler <thomasbtspuhler.com> wrote:
>> > Kolab doesn't allow to send e-mail from
outside the network
>> > The setup is that sasl_authenticated should be
allowed to send e-mail
>> > from outside the local network.
>>
>> It is!
>>
>> > However I am being asked for the password in
an infinite loop. It seems
>> > that the sasl path may not be correct
>>
>> The error reported by postfix in the log could help
us a lot 
>>
>> Did you allowed
>>
>> > --
>> > Thomas Spuhler
>> >
>> >
_______________________________________________
>> > Kolab-users mailing list
>> > Kolab-userskolab.org
>> > https:
//kolab.org/mailman/listinfo/kolab-users
>
> I did use authentication from inside just to get the
error log (easier than go 
> outside), I don't need them from the internal network:
>
> From  /var/log/mail/info.log

"/var/log/mail/info.log" does not look like you
are using a standard
Kolab Server. When reporting errors/problems, please follow
the
guidelines detailed at http:
//wiki.kolab.org/index.php/Error_reporting

> Sep  9 21:35:00 aargau postfix/smtpd[10336]: connection
established
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
master_notify: status 0
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: name_mask:
resource
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: name_mask:
software
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_create: SASL 
> service=smtp, realm=(null)
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: name_mask:
noanonymous
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: connect
from 
> aargau.btspuhler.com[127.0.0.1]
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 
> aargau.btspuhler.com: no match
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 127.0.0.1: no 
> match
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 
> aargau.btspuhler.com: no match
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 127.0.0.1: no 
> match
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: send attr
request = seed
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: send attr
size = 32
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
private/tlsmgr: wanted attribute: 
> status
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: input
attribute name: status
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: input
attribute value: 0
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
private/tlsmgr: wanted attribute: 
> seed
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: input
attribute name: seed
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: input
attribute value: 
> xXhiDtFxRCWVc0zl45K3+1na8rpR5nQwaN2riOYxk=
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
private/tlsmgr: wanted attribute: 
> (list terminator)
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: input
attribute name: (end)
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostname: 
> aargau.btspuhler.com ~? 127.0.0.0/8
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostaddr: 127.0.0.1 ~? 
> 127.0.0.0/8
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]: 220
aargau.btspuhler.com ESMTP Postfix
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: < 
> aargau.btspuhler.com[127.0.0.1]: EHLO
aargau.btspuhler.com
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]:
250-aargau.btspuhler.com
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]: 250-PIPELINING
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]: 250-SIZE 5000000
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]: 250-VRFY
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]: 250-ETRN
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]: 250-AUTH GSSAPI
CRAM-MD5 DIGEST-MD5 LOGIN 
> PLAIN
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 
> aargau.btspuhler.com: no match
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 127.0.0.1: no 
> match
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]: 250-AUTH=GSSAPI
CRAM-MD5 DIGEST-MD5 LOGIN 
> PLAIN
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]:
250-ENHANCEDSTATUSCODES
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]: 250-8BITMIME
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]: 250 DSN
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: < 
> aargau.btspuhler.com[127.0.0.1]: AUTH PLAIN 
>
dGhvbWFzQGJ0c3B1aGxlci5jAdGhvbWFzQGJ0c3B1aGxlci5jb20AYnJ1bm8
1MA==
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_first: 
> sasl_method PLAIN, init_response 
>
dGhvbWFzQGJ0c3B1aGxlci5jAdGhvbWFzQGJ0c3B1aGxlci5jb20AYnJ1bm8
1MA==
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_first: decoded 
> initial response thomasbtspuhler.com
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: > 
> aargau.btspuhler.com[127.0.0.1]: 535 5.7.0 Error:
authentication failed: 
> authentication failure
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: smtp_get:
EOF
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostname: 
> aargau.btspuhler.com ~? 127.0.0.0/8
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostaddr: 127.0.0.1 ~? 
> 127.0.0.0/8
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: lost
connection after AUTH from 
> aargau.btspuhler.com[127.0.0.1]
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: disconnect
from 
> aargau.btspuhler.com[127.0.0.1]
> Sep  9 21:35:00 aargau postfix/smtpd[10336]:
master_notify: status 1
> Sep  9 21:35:00 aargau postfix/smtpd[10336]: connection
closed
>
> and from /var/log/auth.log
> Sep  9 21:38:29 aargau postfix/smtpd[10396]:
auxpropfunc error invalid 
> parameter supplied 
> Sep  9 21:38:29 aargau postfix/smtpd[10396]:
_sasl_plugin_load failed on 
> sasl_auxprop_plug_init for plugin: ldapdb 

Does the basic SASL troubleshooting work
(http://wiki.kolab.org/index.php/Kolab2_Serve
r_Troubleshooting_-_SASL)?
Can you log in from the command line?

Cheers,

Gunnar

>
>
> I altered the passwords slightly
> -- 
>
> Thomas Spuhler
>
> _______________________________________________
> Kolab-users mailing list
> Kolab-userskolab.org
> https:
//kolab.org/mailman/listinfo/kolab-users

-- 
______ http://kdab.com
_______________ http://kolab-konsortium.c
om _

prdus Kolab work is funded in part by KDAB and the
Kolab Konsortium

____ http://www.pardus.de
_________________ http://gunnarwrobel.de _
E-mail : prdus.de                                 Dr. Gunnar
Wrobel
Tel.   : +49 40 432 72335                          
Bundesstrasse 29
Fax    : +49 40 432 70855                            D-20146
Hamburg
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~
   >> Mail at ease - Rent a kolab groupware server at
prdus <<                 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users
Kolab doesn't alow to send e-mail from outside the network
country flaguser name
United States		 2007-09-10 14:40:58 
On Mon, 2007-09-10 at 07:15 +0200, Gunnar Wrobel wrote:
> Thomas Spuhler <thomasbtspuhler.com> writes:
> 
> > On Sunday 09 September 2007 11:23, Alain Spineux
wrote:
> >> On 9/9/07, Thomas Spuhler <thomasbtspuhler.com> wrote:
> >> > Kolab doesn't allow to send e-mail from
outside the network
> >> > The setup is that sasl_authenticated
should be allowed to send e-mail
> >> > from outside the local network.
> >>
> >> It is!
> >>
> >> > However I am being asked for the password
in an infinite loop. It seems
> >> > that the sasl path may not be correct
> >>
> >> The error reported by postfix in the log could
help us a lot 
> >>
> >> Did you allowed
> >>
> >> > --
> >> > Thomas Spuhler
> >> >
> >> >
_______________________________________________
> >> > Kolab-users mailing list
> >> > Kolab-userskolab.org
> >> > https:
//kolab.org/mailman/listinfo/kolab-users
> >
> > I did use authentication from inside just to get
the error log (easier than go 
> > outside), I don't need them from the internal
network:
> >
> > From  /var/log/mail/info.log
> 
> "/var/log/mail/info.log" does not look like
you are using a standard
> Kolab Server. When reporting errors/problems, please
follow the
> guidelines detailed at http:
//wiki.kolab.org/index.php/Error_reporting

Yes, it's a Mandriva install (2007.0).

> 
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
connection established
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
master_notify: status 0
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
name_mask: resource
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
name_mask: software
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_create: SASL 
> > service=smtp, realm=(null)
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
name_mask: noanonymous
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
connect from 
> > aargau.btspuhler.com[127.0.0.1]
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 
> > aargau.btspuhler.com: no match
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 127.0.0.1: no 
> > match
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 
> > aargau.btspuhler.com: no match
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 127.0.0.1: no 
> > match
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: send
attr request = seed
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: send
attr size = 32
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
private/tlsmgr: wanted attribute: 
> > status
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: input
attribute name: status
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: input
attribute value: 0
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
private/tlsmgr: wanted attribute: 
> > seed
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: input
attribute name: seed
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: input
attribute value: 
> > xXhiDtFxRCWVc0zl45K3+1na8rpR5nQwaN2riOYxk=
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
private/tlsmgr: wanted attribute: 
> > (list terminator)
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: input
attribute name: (end)
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostname: 
> > aargau.btspuhler.com ~? 127.0.0.0/8
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostaddr: 127.0.0.1 ~? 
> > 127.0.0.0/8
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]: 220
aargau.btspuhler.com ESMTP Postfix
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: <

> > aargau.btspuhler.com[127.0.0.1]: EHLO
aargau.btspuhler.com
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]:
250-aargau.btspuhler.com
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]: 250-PIPELINING
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]: 250-SIZE 5000000
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]: 250-VRFY
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]: 250-ETRN
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]: 250-AUTH GSSAPI
CRAM-MD5 DIGEST-MD5 LOGIN 
> > PLAIN
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 
> > aargau.btspuhler.com: no match
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match: 127.0.0.1: no 
> > match
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]: 250-AUTH=GSSAPI
CRAM-MD5 DIGEST-MD5 LOGIN 
> > PLAIN
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]:
250-ENHANCEDSTATUSCODES
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]: 250-8BITMIME
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]: 250 DSN
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: <

> > aargau.btspuhler.com[127.0.0.1]: AUTH PLAIN 
> >
dGhvbWFzQGJ0c3B1aGxlci5jAdGhvbWFzQGJ0c3B1aGxlci5jb20AYnJ1bm8
1MA==
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_first: 
> > sasl_method PLAIN, init_response 
> >
dGhvbWFzQGJ0c3B1aGxlci5jAdGhvbWFzQGJ0c3B1aGxlci5jb20AYnJ1bm8
1MA==
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_first: decoded 
> > initial response thomasbtspuhler.com
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: >

> > aargau.btspuhler.com[127.0.0.1]: 535 5.7.0 Error:
authentication failed: 
> > authentication failure
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
smtp_get: EOF
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostname: 
> > aargau.btspuhler.com ~? 127.0.0.0/8
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostaddr: 127.0.0.1 ~? 
> > 127.0.0.0/8
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]: lost
connection after AUTH from 
> > aargau.btspuhler.com[127.0.0.1]
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
disconnect from 
> > aargau.btspuhler.com[127.0.0.1]
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
master_notify: status 1
> > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
connection closed
> >
> > and from /var/log/auth.log
> > Sep  9 21:38:29 aargau postfix/smtpd[10396]:
auxpropfunc error invalid 
> > parameter supplied 
> > Sep  9 21:38:29 aargau postfix/smtpd[10396]:
_sasl_plugin_load failed on 
> > sasl_auxprop_plug_init for plugin: ldapdb 
> 
> Does the basic SASL troubleshooting work
> (http://wiki.kolab.org/index.php/Kolab2_Serve
r_Troubleshooting_-_SASL)?
> Can you log in from the command line?

This works great.
# testsaslauthd -u thomasbtspuhler.com -p mypasswd
0: OK "Success."

> 
> Cheers,
> 
> Gunnar
> 
> >
> >
> > I altered the passwords slightly
> > -- 
> >
> > Thomas Spuhler
> >
> > _____________________

I commented out the tls-only for debuging.
No I get this when trying to authenticate from outside using
telnet:

$ telnet aargau.btspuhler.com 25
Trying 168.103.242.218...
Connected to aargau.btspuhler.com (168.103.242.218).
Escape character is '^]'.
220 aargau.btspuhler.com ESMTP Postfix
EHLO mydomain.com
250-aargau.btspuhler.com
250-PIPELINING
250-SIZE 5000000
250-VRFY
250-ETRN
250-STARTTLS
250-AUTH GSSAPI CRAM-MD5 DIGEST-MD5 LOGIN PLAIN
250-AUTH=GSSAPI CRAM-MD5 DIGEST-MD5 LOGIN PLAIN
250-ENHANCEDSTATUSCODES
250-8BITMIME
250 DSN
AUTH PLAIN AHRob21hc3NwdWhsZXIAYnJ1
535 5.7.0 Error: authentication failed: authentication
failure

I noticed that I have 
250-AUTH GSSAPI CRAM-MD5 DIGEST-MD5 LOGIN PLAIN

twice but i have smtpd.conf 
pwcheck_method: saslauthd
mech_list: PLAIN

on the old server that works I have the same in smtpd.conf
but I get

250 AUTH PLAIN and only once
*****
250-SIZE 10240000
250-VRFY
250-ETRN
250-STARTTLS
250-AUTH PLAIN
250 8BITMIME
****
maybe the /var/log/auth.log gives the clue?

Thanks
Thomas

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users
Re: Kolab doesn't alow to send e-mail from outside the network
country flaguser name
United States		 2007-09-13 23:40:32 
On Monday 10 September 2007 12:40, Thomas Spuhler wrote:
> On Mon, 2007-09-10 at 07:15 +0200, Gunnar Wrobel
wrote:
> > Thomas Spuhler <thomasbtspuhler.com> writes:
> > > On Sunday 09 September 2007 11:23, Alain
Spineux wrote:
> > >> On 9/9/07, Thomas Spuhler <thomasbtspuhler.com> wrote:
> > >> > Kolab doesn't allow to send e-mail
from outside the network
> > >> > The setup is that sasl_authenticated
should be allowed to send
> > >> > e-mail from outside the local
network.
> > >>
> > >> It is!
> > >>
> > >> > However I am being asked for the
password in an infinite loop. It
> > >> > seems that the sasl path may not be
correct
> > >>
> > >> The error reported by postfix in the log
could help us a lot 
> > >>
> > >> Did you allowed
> > >>
> > >> > --
> > >> > Thomas Spuhler
> > >> >
> > >> >
_______________________________________________
> > >> > Kolab-users mailing list
> > >> > Kolab-userskolab.org
> > >> > https:
//kolab.org/mailman/listinfo/kolab-users
> > >
> > > I did use authentication from inside just to
get the error log (easier
> > > than go outside), I don't need them from the
internal network:
> > >
> > > From  /var/log/mail/info.log
> >
> > "/var/log/mail/info.log" does not look
like you are using a standard
> > Kolab Server. When reporting errors/problems,
please follow the
> > guidelines detailed at http:
//wiki.kolab.org/index.php/Error_reporting
>
> Yes, it's a Mandriva install (2007.0).
>
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
connection established
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
master_notify: status 0
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
name_mask: resource
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
name_mask: software
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_create:
> > > SASL service=smtp, realm=(null)
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
name_mask: noanonymous
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
connect from
> > > aargau.btspuhler.com[127.0.0.1]
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match:
> > > aargau.btspuhler.com: no match
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match:
> > > 127.0.0.1: no match
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match:
> > > aargau.btspuhler.com: no match
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match:
> > > 127.0.0.1: no match
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
send attr request = seed
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
send attr size = 32
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
private/tlsmgr: wanted
> > > attribute: status
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
input attribute name:
> > > status Sep  9 21:35:00 aargau
postfix/smtpd[10336]: input attribute
> > > value: 0 Sep  9 21:35:00 aargau
postfix/smtpd[10336]: private/tlsmgr:
> > > wanted attribute: seed
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
input attribute name: seed
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
input attribute value:
> > > xXhiDtFxRCWVc0zl45K3+1na8rpR5nQwaN2riOYxk=
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
private/tlsmgr: wanted
> > > attribute: (list terminator)
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
input attribute name:
> > > (end) Sep  9 21:35:00 aargau
postfix/smtpd[10336]: match_hostname:
> > > aargau.btspuhler.com ~? 127.0.0.0/8
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostaddr: 127.0.0.1
> > > ~? 127.0.0.0/8
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]: 220
aargau.btspuhler.com ESMTP Postfix
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
<
> > > aargau.btspuhler.com[127.0.0.1]: EHLO
aargau.btspuhler.com
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]:
250-aargau.btspuhler.com
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]:
250-PIPELINING
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]: 250-SIZE
5000000
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]: 250-VRFY
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]: 250-ETRN
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]: 250-AUTH
GSSAPI CRAM-MD5 DIGEST-MD5
> > > LOGIN PLAIN
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match:
> > > aargau.btspuhler.com: no match
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_list_match:
> > > 127.0.0.1: no match
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]:
250-AUTH=GSSAPI CRAM-MD5 DIGEST-MD5
> > > LOGIN PLAIN
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]:
250-ENHANCEDSTATUSCODES
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]:
250-8BITMIME
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]: 250 DSN
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
<
> > > aargau.btspuhler.com[127.0.0.1]: AUTH PLAIN
> > >
dGhvbWFzQGJ0c3B1aGxlci5jAdGhvbWFzQGJ0c3B1aGxlci5jb20AYnJ1bm8
1MA==
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_first:
> > > sasl_method PLAIN, init_response
> > >
dGhvbWFzQGJ0c3B1aGxlci5jAdGhvbWFzQGJ0c3B1aGxlci5jb20AYnJ1bm8
1MA==
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
xsasl_cyrus_server_first:
> > > decoded initial response thomasbtspuhler.com
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
>
> > > aargau.btspuhler.com[127.0.0.1]: 535 5.7.0
Error: authentication
> > > failed: authentication failure
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
smtp_get: EOF
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostname:
> > > aargau.btspuhler.com ~? 127.0.0.0/8
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
match_hostaddr: 127.0.0.1
> > > ~? 127.0.0.0/8
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
lost connection after AUTH
> > > from aargau.btspuhler.com[127.0.0.1]
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
disconnect from
> > > aargau.btspuhler.com[127.0.0.1]
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
master_notify: status 1
> > > Sep  9 21:35:00 aargau postfix/smtpd[10336]:
connection closed
> > >
> > > and from /var/log/auth.log
> > > Sep  9 21:38:29 aargau postfix/smtpd[10396]:
auxpropfunc error invalid
> > > parameter supplied
> > > Sep  9 21:38:29 aargau postfix/smtpd[10396]:
_sasl_plugin_load failed
> > > on sasl_auxprop_plug_init for plugin: ldapdb
> >
> > Does the basic SASL troubleshooting work
> > (http://wiki.kolab.org/index.php/Kolab2_Serve
r_Troubleshooting_-_SASL)?
> > Can you log in from the command line?
>
> This works great.
> # testsaslauthd -u thomasbtspuhler.com -p mypasswd
> 0: OK "Success."
>
> > Cheers,
> >
> > Gunnar
> >
> > > I altered the passwords slightly
> > > --
> > >
> > > Thomas Spuhler
> > >
> > > _____________________
>
> I commented out the tls-only for debuging.
> No I get this when trying to authenticate from outside
using telnet:
>
> $ telnet aargau.btspuhler.com 25
> Trying 168.103.242.218...
> Connected to aargau.btspuhler.com (168.103.242.218).
> Escape character is '^]'.
> 220 aargau.btspuhler.com ESMTP Postfix
> EHLO mydomain.com
> 250-aargau.btspuhler.com
> 250-PIPELINING
> 250-SIZE 5000000
> 250-VRFY
> 250-ETRN
> 250-STARTTLS
> 250-AUTH GSSAPI CRAM-MD5 DIGEST-MD5 LOGIN PLAIN
> 250-AUTH=GSSAPI CRAM-MD5 DIGEST-MD5 LOGIN PLAIN
> 250-ENHANCEDSTATUSCODES
> 250-8BITMIME
> 250 DSN
> AUTH PLAIN AHRob21hc3NwdWhsZXIAYnJ1
> 535 5.7.0 Error: authentication failed: authentication
failure
>
> I noticed that I have
> 250-AUTH GSSAPI CRAM-MD5 DIGEST-MD5 LOGIN PLAIN
>
> twice but i have smtpd.conf
> pwcheck_method: saslauthd
> mech_list: PLAIN
>
> on the old server that works I have the same in
smtpd.conf but I get
>
> 250 AUTH PLAIN and only once
> *****
> 250-SIZE 10240000
> 250-VRFY
> 250-ETRN
> 250-STARTTLS
> 250-AUTH PLAIN
> 250 8BITMIME
> ****
> maybe the /var/log/auth.log gives the clue?
>
> Thanks
> Thomas
>
> _______________________________________________
> Kolab-users mailing list
> Kolab-userskolab.org
> https:
//kolab.org/mailman/listinfo/kolab-users

Problem got magically resolved overnight. Did some security
upgrades.
Thanks to everybody who tried to help.

-- 
Thomas

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users
[1-6]

about | contact  Other archives ( Real Estate discussion Medical topics )