List Info

Thread: gcc installation fails on Solaris 10 amd64
gcc installation fails on Solaris 10 amd64
country flaguser name
Germany		 2007-12-09 08:33:07 
Hello,

I tried to compile Kolab 2.1.0 on amd64 hardware with
Solaris 10 
(build 07/08)
When creating libtool, I get the following error:

checking for g++ that supports -ffunction-sections
-fdata-sections... yes
checking for sin in -lm... configure: error: Link tests are
not allowed 
after GCC_NO_EXECUTABLES.
make[1]: *** [configure-target-libstdc++-v3] Error 1
make: *** [bootstrap-lean] Error 2
error: Bad exit status from /kolab/RPM/TMP/rpm-tmp.3476
(%build)

Im using gcc from SUNWgcc

    PKGINST:  SUNWgcc
       NAME:  gcc - The GNU C compiler
   CATEGORY:  system
       ARCH:  i386
    VERSION:  11.10.0,REV=2005.01.08.01.09
    BASEDIR:  /
     VENDOR:  Sun Microsystems, Inc.
       DESC:  GNU C - The GNU C compiler 3.4.3
     PSTAMP:  sfw10-patch-x20070620054354
   INSTDATE:  Nov 28 2007 16:05

Default Library Path (ELF):   /lib:/usr/lib:/usr/sfw/lib

/usr/bin/cc is a link to /usr/sfw/gcc


openpkg itself installs, but not gcc

INSTALL: openpkg-2.5.4-2.5.4 make-3.80-2.5.0
binutils-2.16.1-2.5.1 
fsl-1.7.0-2.20070303 mm-1.4.0-2.5.0 lzo-2.01-2.5.0
readline-5.0.5-2.5.0 
sharutils-4.5.1-2.5.0 ncurses-5.5.20051015-2.5.0
bzip2-1.0.3-2.5.0 
pcre-6.4-2.5.0 texinfo-4.8-2.5.1 gzip-1.3.5-2.5.1
zlib-1.2.3-2.5.0 
expat-1.95.8-2.5.0 procmail-3.22-2.5.0 m4-1.4.3-2.5.0
bison-2.1-2.5.0 
flex-2.5.31-2.5.0 config-20051002-2.5.0 libiconv-1.10-2.5.0

openpkg-tools-0.8.47-2.5.0 patch-2.5.9-2.5.0 sed-4.1.4-2.5.0

libxml-2.6.22-2.5.0 libxslt-1.1.15-2.5.1
amavisd-2.3.3-2.5.0_kolab 
pkgconfig-0.19-2.5.0 kolabd-2.1.0-20070510
kolab-webadmin-2.1.0-20070510
MISSSRC: none
MISSPKG: gcc-4.0.2-2.5.0 perl-5.8.7-2.5.1
perl-openpkg-5.8.7-2.5.0 
perl-conv-5.8.7-2.5.0 grep-2.5.1a-2.5.0
diffutils-2.8.7-2.5.0 
perl-term-5.8.7-2.5.0 perl-ds-5.8.7-2.5.0
perl-stats-5.8.7-2.5.0 
perl-time-5.8.7-2.5.0 perl-util-5.8.7-2.5.0
perl-parse-5.8.7-2.5.0 
perl-sys-5.8.7-2.5.0 openssl-0.9.8a-2.5.4
perl-mail-5.8.7-2.5.0 
perl-crypto-5.8.7-2.5.0 perl-xml-5.8.7-2.5.0
perl-net-5.8.7-2.5.0 
perl-comp-5.8.7-2.5.0 perl-ssl-5.8.7-2.5.0
perl-www-5.8.7-2.5.1 
perl-dns-5.8.7-2.5.0 imap-2004g-2.5.0_kolab
db-4.3.29.0-2.5.0 
openldap-2.3.29-2.20061110_kolab groff-1.19.2-2.5.0
sasl-2.1.21-2.5.0 
getopt-20051005-2.5.0 proftpd-1.3.0rc2-2.5.0
postfix-2.2.5-2.5.0_kolab 
perl-ldap-5.8.7-2.5.0 perl-db-5.8.7-2.5.1
imapd-2.2.12-2.5.0_kolab2 
autoconf-2.59-2.5.0 automake-1.9.6-2.5.0
gettext-0.14.5-2.5.0 
file-4.15-2.5.0_kolab2 apache-1.3.33-2.5.6_kolab2
php-4.4.0-2.5.2_kolab2 
php-smarty-2.6.10-20051003 gmp-4.1.4-2.5.0
spamassassin-3.1.0-2.5.1_kolab 
curl-7.15.0-2.5.2 bc-1.06-2.5.0 clamav-0.90.2-20070413_kolab

perl-kolab-5.8.7-20070420
kolab-horde-framework-2.1.0-20070420 
kolab-resource-handlers-2.1.0-20070510
kolab-horde-fbview-2.1.0-20070420

Other Gnu Software installed:
system      SUNWa2psr                        a2ps - GNU Any
to PostScript 
filter (root)
system      SUNWa2psu                        a2ps - GNU Any
to PostScript 
filter (user)
system      SUNWbash                         GNU
Bourne-Again shell (bash)
system      SUNWbinutils                     binutils - GNU
binutils
system      SUNWgcc                          gcc - The GNU C
compiler
system      SUNWgcmn                         gcmn - Common
GNU package
system      SUNWggrp                         ggrep - GNU
grep utilities
system      SUNWgm4                          gmake - GNU m4
system      SUNWgmake                        gmake - GNU
make
EVO146      SUNWgnutls                       GNU Transport
Layer Security 
Library
EVO146      SUNWgnutls-devel                 GNU Transport
Layer Security 
Library - developer files
system      SUNWgpch                         The GNU Patch
utility
system      SUNWgrub                         GNU GRUB - GNU
GRand Unified 
Bootloader
system      SUNWgsfot                        GNU Ghostscript
Fonts (Other)
system      SUNWgsfst                        GNU Ghostscript
Fonts 
(Standard)
system      SUNWgtar                         gtar - GNU tar
system      SUNWgzip                         The GNU Zip
(gzip) 
compression utility
system      SUNWless                         The GNU pager
(less)
system      SUNWpppg                         GNU utilities
for PPP
system      SUNWsfdoc                        GNU and open
source 
documentation
system      SUNWsfinf                        GNU and open
source info 
pages
system      SUNWsfman                        GNU and open
source man pages
system      SUNWtexi                         GNU texinfo -
Texinfo 
utilities (texinfo)
system      SUNWwgetr                        GNU wget -
utility to 
retrieve files from the World Wide Web (root)
system      SUNWwgetu                        wget - GNU
wget


Any help is appreciated.

Regards
Helga Mayer

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users
Re: gcc installation fails on Solaris 10 amd64
user name
 2007-12-09 09:19:38 
looking for checking for sin in configure  error  Link tests
are not allowed

I found,

http://www.e
forum.de/viewtopic.php?t=487

take a look and report if it help.

On Dec 9, 2007 3:33 PM,  <helga.mayeruni-hohenheim.de> wrote:
> Hello,
>
> I tried to compile Kolab 2.1.0 on amd64 hardware with
Solaris 10
> (build 07/08)
> When creating libtool, I get the following error:
>
> checking for g++ that supports -ffunction-sections
-fdata-sections... yes
> checking for sin in -lm... configure: error: Link tests
are not allowed
> after GCC_NO_EXECUTABLES.
> make[1]: *** [configure-target-libstdc++-v3] Error 1
> make: *** [bootstrap-lean] Error 2
> error: Bad exit status from /kolab/RPM/TMP/rpm-tmp.3476
(%build)
>
> Im using gcc from SUNWgcc
>
>     PKGINST:  SUNWgcc
>        NAME:  gcc - The GNU C compiler
>    CATEGORY:  system
>        ARCH:  i386
>     VERSION:  11.10.0,REV=2005.01.08.01.09
>     BASEDIR:  /
>      VENDOR:  Sun Microsystems, Inc.
>        DESC:  GNU C - The GNU C compiler 3.4.3
>      PSTAMP:  sfw10-patch-x20070620054354
>    INSTDATE:  Nov 28 2007 16:05
>
> Default Library Path (ELF):  
/lib:/usr/lib:/usr/sfw/lib
>
> /usr/bin/cc is a link to /usr/sfw/gcc
>
>
> openpkg itself installs, but not gcc
>
> INSTALL: openpkg-2.5.4-2.5.4 make-3.80-2.5.0
binutils-2.16.1-2.5.1
> fsl-1.7.0-2.20070303 mm-1.4.0-2.5.0 lzo-2.01-2.5.0
readline-5.0.5-2.5.0
> sharutils-4.5.1-2.5.0 ncurses-5.5.20051015-2.5.0
bzip2-1.0.3-2.5.0
> pcre-6.4-2.5.0 texinfo-4.8-2.5.1 gzip-1.3.5-2.5.1
zlib-1.2.3-2.5.0
> expat-1.95.8-2.5.0 procmail-3.22-2.5.0 m4-1.4.3-2.5.0
bison-2.1-2.5.0
> flex-2.5.31-2.5.0 config-20051002-2.5.0
libiconv-1.10-2.5.0
> openpkg-tools-0.8.47-2.5.0 patch-2.5.9-2.5.0
sed-4.1.4-2.5.0
> libxml-2.6.22-2.5.0 libxslt-1.1.15-2.5.1
amavisd-2.3.3-2.5.0_kolab
> pkgconfig-0.19-2.5.0 kolabd-2.1.0-20070510
kolab-webadmin-2.1.0-20070510
> MISSSRC: none
> MISSPKG: gcc-4.0.2-2.5.0 perl-5.8.7-2.5.1
perl-openpkg-5.8.7-2.5.0
> perl-conv-5.8.7-2.5.0 grep-2.5.1a-2.5.0
diffutils-2.8.7-2.5.0
> perl-term-5.8.7-2.5.0 perl-ds-5.8.7-2.5.0
perl-stats-5.8.7-2.5.0
> perl-time-5.8.7-2.5.0 perl-util-5.8.7-2.5.0
perl-parse-5.8.7-2.5.0
> perl-sys-5.8.7-2.5.0 openssl-0.9.8a-2.5.4
perl-mail-5.8.7-2.5.0
> perl-crypto-5.8.7-2.5.0 perl-xml-5.8.7-2.5.0
perl-net-5.8.7-2.5.0
> perl-comp-5.8.7-2.5.0 perl-ssl-5.8.7-2.5.0
perl-www-5.8.7-2.5.1
> perl-dns-5.8.7-2.5.0 imap-2004g-2.5.0_kolab
db-4.3.29.0-2.5.0
> openldap-2.3.29-2.20061110_kolab groff-1.19.2-2.5.0
sasl-2.1.21-2.5.0
> getopt-20051005-2.5.0 proftpd-1.3.0rc2-2.5.0
postfix-2.2.5-2.5.0_kolab
> perl-ldap-5.8.7-2.5.0 perl-db-5.8.7-2.5.1
imapd-2.2.12-2.5.0_kolab2
> autoconf-2.59-2.5.0 automake-1.9.6-2.5.0
gettext-0.14.5-2.5.0
> file-4.15-2.5.0_kolab2 apache-1.3.33-2.5.6_kolab2
php-4.4.0-2.5.2_kolab2
> php-smarty-2.6.10-20051003 gmp-4.1.4-2.5.0
spamassassin-3.1.0-2.5.1_kolab
> curl-7.15.0-2.5.2 bc-1.06-2.5.0
clamav-0.90.2-20070413_kolab
> perl-kolab-5.8.7-20070420
kolab-horde-framework-2.1.0-20070420
> kolab-resource-handlers-2.1.0-20070510
kolab-horde-fbview-2.1.0-20070420
>
> Other Gnu Software installed:
> system      SUNWa2psr                        a2ps - GNU
Any to PostScript
> filter (root)
> system      SUNWa2psu                        a2ps - GNU
Any to PostScript
> filter (user)
> system      SUNWbash                         GNU
Bourne-Again shell (bash)
> system      SUNWbinutils                     binutils -
GNU binutils
> system      SUNWgcc                          gcc - The
GNU C compiler
> system      SUNWgcmn                         gcmn -
Common GNU package
> system      SUNWggrp                         ggrep -
GNU grep utilities
> system      SUNWgm4                          gmake -
GNU m4
> system      SUNWgmake                        gmake -
GNU make
> EVO146      SUNWgnutls                       GNU
Transport Layer Security
> Library
> EVO146      SUNWgnutls-devel                 GNU
Transport Layer Security
> Library - developer files
> system      SUNWgpch                         The GNU
Patch utility
> system      SUNWgrub                         GNU GRUB -
GNU GRand Unified
> Bootloader
> system      SUNWgsfot                        GNU
Ghostscript Fonts (Other)
> system      SUNWgsfst                        GNU
Ghostscript Fonts
> (Standard)
> system      SUNWgtar                         gtar - GNU
tar
> system      SUNWgzip                         The GNU
Zip (gzip)
> compression utility
> system      SUNWless                         The GNU
pager (less)
> system      SUNWpppg                         GNU
utilities for PPP
> system      SUNWsfdoc                        GNU and
open source
> documentation
> system      SUNWsfinf                        GNU and
open source info
> pages
> system      SUNWsfman                        GNU and
open source man pages
> system      SUNWtexi                         GNU
texinfo - Texinfo
> utilities (texinfo)
> system      SUNWwgetr                        GNU wget -
utility to
> retrieve files from the World Wide Web (root)
> system      SUNWwgetu                        wget - GNU
wget
>
>
> Any help is appreciated.
>
> Regards
> Helga Mayer
>
> _______________________________________________
> Kolab-users mailing list
> Kolab-userskolab.org
> https:
//kolab.org/mailman/listinfo/kolab-users
>



-- 
Alain Spineux
aspineux gmail com
May the sources be with you

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users
Re: gcc installation fails on Solaris 10 amd64
user name
 2007-12-12 01:52:12 
* helga.mayeruni-hohenheim.de <helga.mayeruni-hohenheim.de> [20071209 15:33]:
> I tried to compile Kolab 2.1.0 on amd64 hardware with
Solaris 10 

There have been problems with old OpenPKG releases on 64bit
systems.
While there are workarounds you might also want to try if
OpenPKG
2.2-beta3 runs fine on your system. This way you can make
sure that
the final release will work for you out of the box.

Regards,
Thomas Arendsen Hein

-- 
thomasintevation.de - http://intevation.de/~t
homas/ - OpenPGP key: 0x5816791A
Intevation GmbH, Osnabrueck - Register: Amtsgericht
Osnabrueck, HR B 18998
Geschaeftsfuehrer: Frank Koormann, Bernhard Reiter, Dr.
Jan-Oliver Wagner

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users
Re: gcc installation fails on Solaris 10 amd64
country flaguser name
Germany		 2007-12-13 14:25:16 

Hello Thomas,

On Wed, 12 Dec 2007, Thomas Arendsen Hein wrote:

> * helga.mayeruni-hohenheim.de <helga.mayeruni-hohenheim.de> [20071209 15:33]:
>> I tried to compile Kolab 2.1.0 on amd64 hardware
with Solaris 10
>
> There have been problems with old OpenPKG releases on
64bit systems.
> While there are workarounds you might also want to try
if OpenPKG
> 2.2-beta3 runs fine on your system. This way you can
make sure that
> the final release will work for you out of the box.

it almost works.
Everything compiles, apart from apache and php.
The error message:
checking for db4 major version... configure: error: Header
contains 
different version
error: Bad exit status from /kolab/RPM/TMP/rpm-tmp.29734
(%build)

May be the hints from Andrea Soliva 
http://www.comcept.ch/kolab2/solaris_10_kolab2_install
.txt
will help.

I'll try that tomorrow.

Thanks so far.
Regards
Helga Mayer

>
> Regards,
> Thomas Arendsen Hein
>
> --
> thomasintevation.de - http://intevation.de/~t
homas/ - OpenPGP key: 0x5816791A
> Intevation GmbH, Osnabrueck - Register: Amtsgericht
Osnabrueck, HR B 18998
> Geschaeftsfuehrer: Frank Koormann, Bernhard Reiter, Dr.
Jan-Oliver Wagner
>
> _______________________________________________
> Kolab-users mailing list
> Kolab-userskolab.org
> https:
//kolab.org/mailman/listinfo/kolab-users
>

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users
[1-4]

about | contact  Other archives ( Real Estate discussion Medical topics )