Install on Ubuntu Gutsy fails (perl)

Hello, 
I'm trying to install with openpkg but the install fails at
the perl
package.

make[1]: Leaving directory `/kolab/RPM/TMP/perl-5.8.7'
./makedepend: 1: Syntax error: Unterminated quoted string
make: *** [depend] Error 2

If you compile perl on a different machine or from a
different object
directory, copy the Policy.sh file from this object
directory to the
new one before you run Configure -- this will help you with
most of
the policy defaults.


I've seen the person on the wiki have the same problem. 
Anybody have an idea ?

Thanks

David

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users

Sorry i've forgot some informations.

I try to install 
kolabd-2.1.0-20070510

On a basic workstation

Thanks

Le jeudi 20 mars 2008 à 11:54 +0100, David Correia a écrit
:
> Hello, 
> I'm trying to install with openpkg but the install
fails at the perl
> package.
> 
> make[1]: Leaving directory `/kolab/RPM/TMP/perl-5.8.7'
> ./makedepend: 1: Syntax error: Unterminated quoted
string
> make: *** [depend] Error 2
> 
> If you compile perl on a different machine or from a
different object
> directory, copy the Policy.sh file from this object
directory to the
> new one before you run Configure -- this will help you
with most of
> the policy defaults.
> 
> 
> I've seen the person on the wiki have the same problem.

> Anybody have an idea ?
> 
> Thanks
> 
> David
> 
> _______________________________________________
> Kolab-users mailing list
> Kolab-userskolab.org
> https:
//kolab.org/mailman/listinfo/kolab-users
> 

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users

On Thu, Mar 20, 2008 at 11:54 AM, David Correia
<baal-uixwanadoo.fr> wrote:
> Hello,
>  I'm trying to install with openpkg but the install
fails at the perl
>  package.
>
>  make[1]: Leaving directory
`/kolab/RPM/TMP/perl-5.8.7'
>  ./makedepend: 1: Syntax error: Unterminated quoted
string
>  make: *** [depend] Error 2
>
>  If you compile perl on a different machine or from a
different object
>  directory, copy the Policy.sh file from this object
directory to the
>  new one before you run Configure -- this will help you
with most of
>  the policy defaults.

I had a problem with perl at install time when SELINUX was
enabled.
I switched to permissive or disabled and the problem
disappeared.

I made some post about this long time ago, it was on a
Fedora 7 or 8
or on a Centos 5.
Check the archive for more, maybe they are something in the
wiki too.

>
>
>  I've seen the person on the wiki have the same
problem.
>  Anybody have an idea ?
>
>  Thanks
>
>  David
>
>  _______________________________________________
>  Kolab-users mailing list
>  Kolab-userskolab.org
>  https:
//kolab.org/mailman/listinfo/kolab-users
>



-- 
Alain Spineux
aspineux gmail com
May the sources be with you

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users

Thank you Alain, but it's a fresh install of Ubuntu, I think
there is no
SElinux.
I'm trying 2.2 RC2 i don't know if it's a good idea.
If not i'd like to try an other distrib. What is the
better's supported
distribution for Kolab? Debian ?






Le jeudi 20 mars 2008 à 13:43 +0100, Alain Spineux a écrit
:
> On Thu, Mar 20, 2008 at 11:54 AM, David Correia
<baal-uixwanadoo.fr> wrote:
> > Hello,
> >  I'm trying to install with openpkg but the
install fails at the perl
> >  package.
> >
> >  make[1]: Leaving directory
`/kolab/RPM/TMP/perl-5.8.7'
> >  ./makedepend: 1: Syntax error: Unterminated
quoted string
> >  make: *** [depend] Error 2
> >
> >  If you compile perl on a different machine or
from a different object
> >  directory, copy the Policy.sh file from this
object directory to the
> >  new one before you run Configure -- this will
help you with most of
> >  the policy defaults.
> 
> I had a problem with perl at install time when SELINUX
was enabled.
> I switched to permissive or disabled and the problem
disappeared.
> 
> I made some post about this long time ago, it was on a
Fedora 7 or 8
> or on a Centos 5.
> Check the archive for more, maybe they are something in
the wiki too.
> 
> >
> >
> >  I've seen the person on the wiki have the same
problem.
> >  Anybody have an idea ?
> >
> >  Thanks
> >
> >  David
> >
> >  _______________________________________________
> >  Kolab-users mailing list
> >  Kolab-userskolab.org
> >  https:
//kolab.org/mailman/listinfo/kolab-users
> >
> 
> 
> 

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users

On Thu, Mar 20, 2008 at 1:57 PM, David Correia
<baal-uixwanadoo.fr> wrote:
> Thank you Alain, but it's a fresh install of Ubuntu, I
think there is no
>  SElinux.
You think ? You should be sure !
I thing most recent linux distribution have all SELinux
enabled.

>  I'm trying 2.2 RC2 i don't know if it's a good idea.
>  If not i'd like to try an other distrib. What is the
better's supported
>  distribution for Kolab? Debian ?

The better is the one you have the use 
The better is to use the openpkg distribution of kolab (not
the SUSE
or DEBIAN pakaging,
even on SUSE or DEBIAN diustribution) on any recent
distribution.
Centos 5, and fedora 8 are working fine, but are surely not
the only one.


>
>
>
>
>
>
>  Le jeudi 20 mars 2008 à 13:43 +0100, Alain Spineux a
écrit :
>
>
> > On Thu, Mar 20, 2008 at 11:54 AM, David Correia
<baal-uixwanadoo.fr> wrote:
>  > > Hello,
>  > >  I'm trying to install with openpkg but the
install fails at the perl
>  > >  package.
>  > >
>  > >  make[1]: Leaving directory
`/kolab/RPM/TMP/perl-5.8.7'
>  > >  ./makedepend: 1: Syntax error: Unterminated
quoted string
>  > >  make: *** [depend] Error 2
>  > >
>  > >  If you compile perl on a different machine
or from a different object
>  > >  directory, copy the Policy.sh file from
this object directory to the
>  > >  new one before you run Configure -- this
will help you with most of
>  > >  the policy defaults.
>  >
>  > I had a problem with perl at install time when
SELINUX was enabled.
>  > I switched to permissive or disabled and the
problem disappeared.
>  >
>  > I made some post about this long time ago, it was
on a Fedora 7 or 8
>  > or on a Centos 5.
>  > Check the archive for more, maybe they are
something in the wiki too.
>  >
>  > >
>  > >
>  > >  I've seen the person on the wiki have the
same problem.
>  > >  Anybody have an idea ?
>  > >
>  > >  Thanks
>  > >
>  > >  David
>  > >
>  > > 
_______________________________________________
>  > >  Kolab-users mailing list
>  > >  Kolab-userskolab.org
>  > >  https:
//kolab.org/mailman/listinfo/kolab-users
>  > >
>  >
>  >
>  >
>
>



-- 
Alain Spineux
aspineux gmail com
May the sources be with you

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users

Yes i think, because there is no Selinux in ubuntu but
apparmor that is
an alternative, but from some reads i understood that
apparmor have no
profile by default.
I'd like to use Ubuntu, and i have one kolab in production
with Ubuntu,
but it's old version.
I use openpkg, and i better know debian distributions type
and Freebsd,
that's why i asked if somebody have installed that version
on any
distrib with no problem.
But i'd prefere to resolve this issue with gutsy.


Le jeudi 20 mars 2008 à 14:29 +0100, Alain Spineux a écrit
:
> On Thu, Mar 20, 2008 at 1:57 PM, David Correia
<baal-uixwanadoo.fr> wrote:
> > Thank you Alain, but it's a fresh install of
Ubuntu, I think there is no
> >  SElinux.
> You think ? You should be sure !
> I thing most recent linux distribution have all SELinux
enabled.
> 
> >  I'm trying 2.2 RC2 i don't know if it's a good
idea.
> >  If not i'd like to try an other distrib. What is
the better's supported
> >  distribution for Kolab? Debian ?
> 
> The better is the one you have the use 
> The better is to use the openpkg distribution of kolab
(not the SUSE
> or DEBIAN pakaging,
> even on SUSE or DEBIAN diustribution) on any recent
distribution.
> Centos 5, and fedora 8 are working fine, but are surely
not the only one.
> 
> 
> >
> >
> >
> >
> >
> >
> >  Le jeudi 20 mars 2008 à 13:43 +0100, Alain
Spineux a écrit :
> >
> >
> > > On Thu, Mar 20, 2008 at 11:54 AM, David
Correia <baal-uixwanadoo.fr> wrote:
> >  > > Hello,
> >  > >  I'm trying to install with openpkg but
the install fails at the perl
> >  > >  package.
> >  > >
> >  > >  make[1]: Leaving directory
`/kolab/RPM/TMP/perl-5.8.7'
> >  > >  ./makedepend: 1: Syntax error:
Unterminated quoted string
> >  > >  make: *** [depend] Error 2
> >  > >
> >  > >  If you compile perl on a different
machine or from a different object
> >  > >  directory, copy the Policy.sh file
from this object directory to the
> >  > >  new one before you run Configure --
this will help you with most of
> >  > >  the policy defaults.
> >  >
> >  > I had a problem with perl at install time
when SELINUX was enabled.
> >  > I switched to permissive or disabled and the
problem disappeared.
> >  >
> >  > I made some post about this long time ago,
it was on a Fedora 7 or 8
> >  > or on a Centos 5.
> >  > Check the archive for more, maybe they are
something in the wiki too.
> >  >
> >  > >
> >  > >
> >  > >  I've seen the person on the wiki have
the same problem.
> >  > >  Anybody have an idea ?
> >  > >
> >  > >  Thanks
> >  > >
> >  > >  David
> >  > >
> >  > > 
_______________________________________________
> >  > >  Kolab-users mailing list
> >  > >  Kolab-userskolab.org
> >  > >  https:
//kolab.org/mailman/listinfo/kolab-users
> >  > >
> >  >
> >  >
> >  >
> >
> >
> 
> 
> 

_______________________________________________
Kolab-users mailing list
Kolab-userskolab.org
https:
//kolab.org/mailman/listinfo/kolab-users