Hi! New guy here. Not a repair professional,just a diy guy.
I've alway fixed my own pc's, and those of family/friends. Sometimes
I win, sometimes I don't.
Anyway: I've got two hp 1000dv laptops with similar problems. Both
have no power leds at all with AC adapter and/or battery. AC is
good, battery is ok. Did all the standard troubleshooting, points
to "board failure".
Ok..HP #1 is really clean, nicely cared for...BUT was used on a bed
a lot, so probably overheated?
HP #2 was used on a desk with a cooler pad. But taking it apart..I
find the cooling fan really badly plugged and lots of ick and junk
all over inside it. However: This one, after taking off
memory,cd,hd, screen,remove/replace the button battery...down to the
board...plug in the AC and it powers up. Fan runs, leds on, etc. I
don't know what I did to cause this miracle, but maybe something
wasn't seated or something? I'd like to clean it up and put it back
together. I'm hoping to get one working out of this pair.
I'm guessing, after reading a lot of archive posts...that board
failure on these is pretty common? And if that's the deal, not much
a diy guy can do? I read some posts that refer to a fuse...so far, I
can't find anything like that.
Any suggestions?
Thanks!
Dan in Wisconsin
.