--- In nslu2-general%40yahoogroups.com">nslu2-general
yahoogroups.com, "jeppepeder"; <jeppepeder...>
wrote:
>
> --- In nslu2-general%40yahoogroups.com">nslu2-generalyahoogroups.com, "wallace4793"
> <wallace47931> wrote:
> >
>; > --- In nslu2-general%40yahoogroups.com">nslu2-generalyahoogroups.com, "jeppepeder"; <jeppepeder>
> > wrote:
> > >
>; > > --- In nslu2-general%40yahoogroups.com">nslu2-generalyahoogroups.com, "Mike (mwester)"
<mwester>
> > > wrote:
> > > >
>; > > > jeppepeder wrote:
> > > > > Hello !
> > > > > I hope that someone PLEASE could help me, because I have
> spend
> > > more
> > > > > than 40 hours on trying upgrading my NSLU. Now I have lost
> > > contact
> > > > > with the NSLU and cant use it.
> > > > > I have read a lot of webpages and used google, but not
found
> a
> > > > > solution.
> > > > >
> > > > > I have tryed to update the NSLU in two wayes but can't get
> > > further
> > > > > on. In the following text I will explain what the status
is,
> > and
> > > the
> > > > > status is called STATUS A and STATUS B. In both cases I try
> to
> > > upload
> > > > > the firmware "Unslug 6.10Beta firmware" forund here:
> > > > >
> > > > > STATUS A:
> > > > > ----------
> > > > > I have downloaded the upgrade-program UgUtil described on
the
> > > page
> > > > > http://www.nslu2-linux.org/wiki/Main/SercommFirmwareUpdater
> > where
> > > I
> > > > > found the link http://www.everbesthk.com/8-
> > > > > download/sercomm/firmware/NU54/Upgrade_207_XP.zip.
> > > > > First I bring the NSLU into the UpgradeMode readu for
> firmware
> > > > > upgrade.
> > > > > When I run the program Ugutil it find the NSLU and ask for
> the
> > > file
> > > > > to upload. I select the first Unslug file mentioned on the
> page
> > > > > http://www.slug-firmware.net/ with the text "Download
Unslung
> > > > > binaries". The program get through the "Erase EProm"; an get
> > > further
> > > > > to the "upload frimware", but it stay at 0% upload and the
> > UgUtil
> > > > > program send me an error message...
> > > >
> > > > Can you share that error message with us? That might be
> helpful.
> > > >
> > > > Lacking any other information, it seems as though you may
have
> a
> > > network
> > > > problem of sorts. Can you also describe how your host PC and
> the
> > > NSLU2
> > > > are connected to the network, and what you have tried already
> (in
> > > terms
> > > > of changing cables, etc.)?
> > > >
> > > > Mike (mwester)
> > > >
>; > >
> > > Upgrade Utility show NSLU2 device on netvork with the following
> > > information:
> > > Device Name: 001A70A1AF4
> > > Current Version: FFFF
>; > > Upgrade version: 2363
>; > > Device List: 001A70A1AF47
> > >
> > > First Upgradewindow show "Erasing EProm";. Next it
> > show "Upgrading ...
> > > 0%" After a while it show a new window with the following text:
> > >
> > > Upgrade process fail, please check
> > > 1. Print server power connection or
> > > 2. Ethernet cable
> > > Upgrade not completed, please retry
> > >
> > > Upgrading is still at 0% when the program stop.
> > >
> > > I have tried to ping the NSLU2, at the following ip-adresses:
> > > 192.168.1.77
> > > 192.168.1.100
> > > no response. When ping'ing 192.168.2.255 I get the
> > > message "Hardwareerror".
> > >
> > > The NSLU are connected directly by Ethernet cable to my laptop.
> > > Everythin is 10 days old. When I recieved the NSLU2 it worked
> fine
> > by
> > > Ethernet cable to my laptop and over my wireless router.
> > >
> > > I dont know what more to tell ?
> >
> > Hi
> >
> > Please note if you are using vista run the sercomm utility in xp
> sp2
> > compatibiltiy mode or the flash will crash. I had the same
symptoms
> > till i did this.
> >
> > John
>; > >
>; >
>; Dear John !
>
> Thany werry much for your input regarding MS Vista. I am working
with
> Windows XP and understand the documentation that way, that the
> program will run without problems.
>
> Please correct me if I am wrong or have other input. Every input is
> wellcom.
>
> Thanks again.
>
> Japping
One thing come to mind if you changed the IP on your slug before, it
can be useful to add several IP:s in XP:
your connection->properties that connection-->tcp/ip-->advanced.
Add more IP:s under advanced tab.
192.168.0.20,192.168.1.20,192.168.2.20 for example thoose.
I dont know if this is useful but I see for example you wrote this:
"When ping'ing 192.168.2.255" its make me wonder.
I just want to inform that we got a irc-channel to
http://www.nslu2-linux.org/wiki/Main/IRC
Maybe, you can have tips there to, and get faster help.
/J
.
