--- In nslu2-general%40yahoogroups.com">nslu2-general
yahoogroups.com, "jeppepeder"; <jeppepeder...>
wrote:
>
> --- In nslu2-general%40yahoogroups.com">nslu2-generalyahoogroups.com, "janne5011" <janne5011>
> wrote:
> >
>; >
> >
> >
> >
> > --- In nslu2-general%40yahoogroups.com">nslu2-generalyahoogroups.com, "jeppepeder"; <jeppepeder>
> > wrote:
> > >
>; > > --- In nslu2-general%40yahoogroups.com">nslu2-generalyahoogroups.com, "wallace4793"
> > > <wallace47931> wrote:
> > > >
>; > > > --- In nslu2-general%40yahoogroups.com">nslu2-generalyahoogroups.com, "jeppepeder";
> <jeppepeder>
> > > > wrote:
> > > > >
>; > > > > --- In nslu2-general%40yahoogroups.com">nslu2-generalyahoogroups.com, "Mike (mwester)"
> > <mwester>
> > > > > wrote:
> > > > > >
>; > > > > > jeppepeder wrote:
> > > > > > > Hello !
> > > > > > > I hope that someone PLEASE could help me, because I
have
> > > spend
> > > > > more
> > > > > > > than 40 hours on trying upgrading my NSLU. Now I have
> lost
> > > > > contact
> > > > > > > with the NSLU and cant use it.
> > > > > > > I have read a lot of webpages and used google, but not
> > found
> > > a
> > > > > > > solution.
> > > > > > >
> > > > > > > I have tryed to update the NSLU in two wayes but can't
> get
> > > > > further
> > > > > > > on. In the following text I will explain what the
status
> > is,
> > > > and
> > > > > the
> > > > > > > status is called STATUS A and STATUS B. In both cases I
> try
> > > to
> > > > > upload
> > > > > > > the firmware "Unslug 6.10Beta firmware" forund here:
> > > > > > >
> > > > > > > STATUS A:
> > > > > > > ----------
> > > > > > > I have downloaded the upgrade-program UgUtil described
on
> > the
> > > > > page
> > > > > > > http://www.nslu2-
> linux.org/wiki/Main/SercommFirmwareUpdater
> > > > where
> > > > > I
> > > > > > > found the link http://www.everbesthk.com/8-
> > > > > > > download/sercomm/firmware/NU54/Upgrade_207_XP.zip.
> > > > > > > First I bring the NSLU into the UpgradeMode readu for
> > > firmware
> > > > > > > upgrade.
> > > > > > > When I run the program Ugutil it find the NSLU and ask
> for
> > > the
> > > > > file
> > > > > > > to upload. I select the first Unslug file mentioned on
> the
> > > page
> > > > > > > http://www.slug-firmware.net/ with the text "Download
> > Unslung
> > > > > > > binaries". The program get through the "Erase EProm"; an
> get
> > > > > further
> > > > > > > to the "upload frimware", but it stay at 0% upload and
> the
> > > > UgUtil
> > > > > > > program send me an error message...
> > > > > >
> > > > > > Can you share that error message with us? That might be
> > > helpful.
> > > > > >
> > > > > > Lacking any other information, it seems as though you may
> > have
> > > a
> > > > > network
> > > > > > problem of sorts. Can you also describe how your host PC
> and
> > > the
> > > > > NSLU2
> > > > > > are connected to the network, and what you have tried
> already
> > > (in
> > > > > terms
> > > > > > of changing cables, etc.)?
> > > > > >
> > > > > > Mike (mwester)
> > > > > >
>; > > > >
> > > > > Upgrade Utility show NSLU2 device on netvork with the
> following
> > > > > information:
> > > > > Device Name: 001A70A1AF4
> > > > > Current Version: FFFF
>; > > > > Upgrade version: 2363
>; > > > > Device List: 001A70A1AF47
> > > > >
> > > > > First Upgradewindow show "Erasing EProm";. Next it
> > > > show "Upgrading ...
> > > > > 0%" After a while it show a new window with the following
> text:
> > > > >
> > > > > Upgrade process fail, please check
> > > > > 1. Print server power connection or
> > > > > 2. Ethernet cable
> > > > > Upgrade not completed, please retry
> > > > >
> > > > > Upgrading is still at 0% when the program stop.
> > > > >
> > > > > I have tried to ping the NSLU2, at the following ip-
adresses:
>; > > > > 192.168.1.77
> > > > > 192.168.1.100
> > > > > no response. When ping'ing 192.168.2.255 I get the
> > > > > message "Hardwareerror".
> > > > >
> > > > > The NSLU are connected directly by Ethernet cable to my
> laptop.
> > > > > Everythin is 10 days old. When I recieved the NSLU2 it
worked
> > > fine
> > > > by
> > > > > Ethernet cable to my laptop and over my wireless router.
> > > > >
> > > > > I dont know what more to tell ?
> > > >
> > > > Hi
> > > >
> > > > Please note if you are using vista run the sercomm utility in
> xp
> > > sp2
> > > > compatibiltiy mode or the flash will crash. I had the same
> > symptoms
> > > > till i did this.
> > > >
> > > > John
>; > > > >
>; > > >
>; > > Dear John !
> > >
> > > Thany werry much for your input regarding MS Vista. I am
working
> > with
> > > Windows XP and understand the documentation that way, that the
> > > program will run without problems.
> > >
> > > Please correct me if I am wrong or have other input. Every
input
> is
> > > wellcom.
> > >
> > > Thanks again.
> > >
> > > Japping
> >
> > One thing come to mind if you changed the IP on your slug before,
> it
> > can be useful to add several IP:s in XP:
> > your connection->properties that connection-->tcp/ip-->advanced.
> > Add more IP:s under advanced tab.
>; > 192.168.0.20,192.168.1.20,192.168.2.20 for example thoose.
> > I dont know if this is useful but I see for example you wrote
this:
> > "When ping'ing 192.168.2.255" its make me wonder.
> >
> > I just want to inform that we got a irc-channel to
> > http://www.nslu2-linux.org/wiki/Main/IRC
> > Maybe, you can have tips there to, and get faster help.
> > /J
> >
>; Hi Jane !
>
> Thanks for your input I realy presiate that.
> I tested several IP-addresses without positive result.
>
> When EEProm is reset the Ready indicator lights red. But when
> flashing the Ready indicator returs to flashing Red/Green.
>
> The question is weather anyone in here use Windows XP as OS for
> firmware upload ?
>
> AND
>
> Does anyone in here live in Denmark and have the time to try
> uploadine firmware to my NSLU ?
question #1: yes it works with secoom tool and win XP.
for removing one more possible problem: disable XP firewall and all
other firewalls if you have any and try again.
>
.
