List migration on the 1st of april

Dear members,

I am proud to announce that we will proceed with the list
migration
during the night between the 31st March and the 1st April
(at 0h00
GMT).

>From this point on, emails should be sent to these
addresses :

- linux-audio-devlists.linuxaudio.org for the developper
mailing list
- linux-audio-userlists.linuxaudio.org for the user mailing
list
- linux-audio-announcelists.linuxaudio.org for the announce
mailing list

The following aliases have been defined, to make it look
nicer.
Consider them as shorter equivalents :

- ladlists.linuxaudio.org for the developer mailing list
- laulists.linuxaudio.org for the user mailing list

No alias for the announce list since it is an open list
(non
subscribers are allowed to post) and we fear a increase in
spam with a
too short name.

Also, to respond to a request to a few of you working with
command
line mail clients, the list tag at the beginning of the
subject line
will be shortened :

[LAD] for linux-audio-dev
[LAU] for linux-audio-user
[LAA] for linux-audio-announce

You may need to update your email filters accordingly.

Those of you posting on the old addresses will get a message
providing
you with the new email to use.

__________________
Marc-Olivier Barre,
Markinoko.

Marc-Olivier Barre wrote:
> Dear members,
> 
> I am proud to announce that we will proceed with the
list migration
> during the night between the 31st March and the 1st
April (at 0h00
> GMT).
> 
>> From this point on, emails should be sent to these
addresses :
> 
> - linux-audio-devlists.linuxaudio.org for the developper
mailing list
> - linux-audio-userlists.linuxaudio.org for the user mailing
list
> - linux-audio-announcelists.linuxaudio.org for
the announce mailing list
> 
> The following aliases have been defined, to make it
look nicer.
> Consider them as shorter equivalents :
> 
> - ladlists.linuxaudio.org for the developer mailing list
> - laulists.linuxaudio.org for the user mailing list


ladlinuxaudio.org
laulinuxaudio.org

work too! - there's no shortcut for the announce list!

> No alias for the announce list since it is an open list
(non
> subscribers are allowed to post) and we fear a increase
in spam with a
> too short name.
> 
> Also, to respond to a request to a few of you working
with command
> line mail clients, the list tag at the beginning of the
subject line
> will be shortened :
> 
> [LAD] for linux-audio-dev
> [LAU] for linux-audio-user
> [LAA] for linux-audio-announce
> 
> You may need to update your email filters accordingly.

i suggest not to filter on Subject but on Email-Header:

X-BeenThere: linux-audio-devlists.linuxaudio.org
X-BeenThere: linux-audio-userlists.linuxaudio.org
X-BeenThere: linux-audio-announcelists.linuxaudio.org

cheers,
robin

fredag 30 mars 2007 00:38 skrev Robin Gareus:
> X-BeenThere: linux-audio-devlists.linuxaudio.org
> X-BeenThere: linux-audio-userlists.linuxaudio.org
> X-BeenThere: linux-audio-announcelists.linuxaudio.org

Sure. It will probably take care of the problem but the
X-headers are not 
standard (although they are used quite frequently). The
List-ID is.

I'm not sure how it would look but something like this I
expect. Mind you. Not 
an 
but rather a dot(.) in between.

List-id: lad.lists.linuxaudio.org
List-id: lau.lists.linuxaudio.org
List-id: laa.lists.linuxaudio.org


ref.
http://www.iana.org/assignments/message-headers
/perm-headers.html


-- 
- Bengan
------------------------------------------------------------

- KTHNOC - No1 Internet Offspring | http://www.noc.kth.se/~
bengan ---
- 08-7906586 (ej vidarekopplat), 070-6443325
------------------------

Hallo,
Bengt Gördén hat gesagt: // Bengt Gördén wrote:

> fredag 30 mars 2007 00:38 skrev Robin Gareus:
> > X-BeenThere: linux-audio-devlists.linuxaudio.org
> > X-BeenThere: linux-audio-userlists.linuxaudio.org
> > X-BeenThere: linux-audio-announcelists.linuxaudio.org
> 
> Sure. It will probably take care of the problem but the
X-headers are not 
> standard (although they are used quite frequently). The
List-ID is.
> 
> I'm not sure how it would look but something like this
I expect. Mind you. Not 
> an  but rather a dot(.) in between.
> 
> List-id: lad.lists.linuxaudio.org
> List-id: lau.lists.linuxaudio.org
> List-id: laa.lists.linuxaudio.org

I would love if the current List-id's could be kept, except
the
list-addresses. I already filter by List-Id, but only up to
the mail
address: 

:0:
* ^List-Id: A list for linux audio users
lau

etc. 

If the "human-readable" names of the lists would
stay the same, no
further work on procmail or other filters would be needed.

Ciao
-- 
 Frank Barknecht                 _ ______footils.org_
__goto10.org__

ON FRI, 2007-03-30 AT 11:27 +0200, FRANK BARKNECHT WROTE:
> HALLO,
> BENGT GöRDéN HAT GESAGT: // BENGT GöRDéN WROTE:
> 
> > FREDAG 30 MARS 2007 00:38 SKREV ROBIN GAREUS:
> > > X-BEENTHERE: LINUX-AUDIO-DEVLISTS.LINUXAUDIO.ORG
> > > X-BEENTHERE: LINUX-AUDIO-USERLISTS.LINUXAUDIO.ORG
> > > X-BEENTHERE: LINUX-AUDIO-ANNOUNCELISTS.LINUXAUDIO.ORG
> > 
> > SURE. IT WILL PROBABLY TAKE CARE OF THE PROBLEM
BUT THE X-HEADERS ARE NOT 
> > STANDARD (ALTHOUGH THEY ARE USED QUITE
FREQUENTLY). THE LIST-ID IS.
> > 
> > I'M NOT SURE HOW IT WOULD LOOK BUT SOMETHING LIKE
THIS I EXPECT. MIND YOU. NOT 
> > AN  BUT RATHER A DOT(.) IN BETWEEN.
> > 
> > LIST-ID: LAD.LISTS.LINUXAUDIO.ORG
> > LIST-ID: LAU.LISTS.LINUXAUDIO.ORG
> > LIST-ID: LAA.LISTS.LINUXAUDIO.ORG
> 
> I WOULD LOVE IF THE CURRENT LIST-ID'S COULD BE KEPT,
EXCEPT THE
> LIST-ADDRESSES.

SAME HERE. LIST-ID HEADERS ALLOW YOU TO "REPLY TO
LIST" IN CLIENTS THAT
SUPPORT IT - NO NEED TO "REPLY TO ALL", CREATING
CONFUSING EXTRA TO:
ADDRESSES, OR TYPE IN THE ADDRESS MANUALLY AND LOSE THE
IN-REPLY-TO
HEADERS, THUS RUINING THE THREAD STRUCTURE.


--LL

On 3/30/07, Frank Barknecht <fbarfootils.org> wrote:
> Hallo,
> Bengt Gördén hat gesagt: // Bengt Gördén wrote:
>
> > fredag 30 mars 2007 00:38 skrev Robin Gareus:
> > > X-BeenThere: linux-audio-devlists.linuxaudio.org
> > > X-BeenThere: linux-audio-userlists.linuxaudio.org
> > > X-BeenThere: linux-audio-announcelists.linuxaudio.org
> >
> > Sure. It will probably take care of the problem
but the X-headers are not
> > standard (although they are used quite
frequently). The List-ID is.
> >
> > I'm not sure how it would look but something like
this I expect. Mind you. Not
> > an  but rather a dot(.) in between.
> >
> > List-id: lad.lists.linuxaudio.org
> > List-id: lau.lists.linuxaudio.org
> > List-id: laa.lists.linuxaudio.org
>
> I would love if the current List-id's could be kept,
except the
> list-addresses. I already filter by List-Id, but only
up to the mail
> address:

The Lidt-Id's will be the same. no problem on that.

-- 
__________________
Marc-Olivier Barre,
Markinoko.