List Info

Thread: Spamassassin -> Bayes not working?
Spamassassin -> Bayes not working?
country flaguser name
Netherlands		 2007-10-18 12:10:20 
Hi

ive been using maia for quite some time now and switched to
bayes in 
MySQL a while ago. this all seemed to go fine, but since I
fiddled with 
it bayes doesnt seem to work anymore, I dont get any bayes
headers and 
also when I run spamassassin outside of amavis I dont see
any bayes 
checks come up and my test messages dont get any score at
all. the whole 
system is running on tripwire, razor and sare rules alone
now.

Relevant output from spamassassin -D --lint (everything I
could find on 
bayes)

[10813] dbg: generic: SpamAssassin version 3.2.3
[10813] dbg: config: read file 
/var/lib/spamassassin/3.002003/70_sare_bayes_poison_nxm_cf_s
are_sa-update_dostech_net.cf
[10813] dbg: plugin: loading
Mail::SpamAssassin::Plugin::Bayes from INC

[10813] dbg: bayes: using username: amavis
[10813] dbg: bayes: database connection established
[10813] dbg: bayes: found bayes db version 3
[10813] dbg: bayes: Using userid: 10

it seems spamassassin is connecting to the db fine

sa-learn --dump magic
0.000          0          3          0  non-token data:
bayes db version
0.000          0      32207          0  non-token data:
nspam
0.000          0      22869          0  non-token data:
nham
0.000          0     153536          0  non-token data:
ntokens
0.000          0 1191258345          0  non-token data:
oldest atime
0.000          0 1192642924          0  non-token data:
newest atime
0.000          0          0          0  non-token data: last
journal 
sync atime
0.000          0 1192640737          0  non-token data: last
expiry atime
0.000          0    1382400          0  non-token data: last
expire 
atime delta
0.000          0       2744          0  non-token data: last
expire 
reduction count

this also shows sufficient tokens to at least do something
with (db was 
reset after I switched to MySQL)

the X- headers from a known spam message look like this:

X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2800.1437
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441
X-Virus-Scanned: Maia Mailguard 1.0.2a
X-Spam-Status: No, hits=1.61 tagged_above=1 required=5 
tests=FM_PORN_A_4=1.09,
SARE_BADGIRLS=0.52
X-Spam-Level: *

there are no bayes checks in here, and not in any other
message either, 
so im a bit worried.
I thought rebuilding the database would only take a short
while but 
still only a few percent of the mail is being caught, and
only because 
everything besides bayes is doing a good job.

today I tried to turn the old DB back on, ran some tests but
came out 
with thesame result.
I have no idea how to get Bayes working again, went trough a
lot of 
docs, including the one I used to set this up in the first
place, but 
couldnt fix it with any one of them.

Rgds,

Michiel van den Berg



_______________________________________________
Maia-users mailing list
Maia-usersrenaissoft.com
http://www.renaissoft.com/mailman/listinfo/maia-users
Re: Spamassassin -> Bayes not working?
country flaguser name
Netherlands		 2007-10-19 05:14:44 
Does anyone have any idea ?

Rgds,

Michiel van den Berg

-----Oorspronkelijk bericht-----
Van: maia-users-bouncesrenaissoft.com
[mailto:maia-users-bouncesrenaissoft.com] Namens
Michiel van den Berg
Verzonden: donderdag 18 oktober 2007 19:10
Aan: Maia
Onderwerp: [Maia-users] Spamassassin -> Bayes not
working?

Hi

ive been using maia for quite some time now and switched to
bayes in 
MySQL a while ago. this all seemed to go fine, but since I
fiddled with 
it bayes doesnt seem to work anymore, I dont get any bayes
headers and 
also when I run spamassassin outside of amavis I dont see
any bayes 
checks come up and my test messages dont get any score at
all. the whole

system is running on tripwire, razor and sare rules alone
now.

Relevant output from spamassassin -D --lint (everything I
could find on 
bayes)

[10813] dbg: generic: SpamAssassin version 3.2.3
[10813] dbg: config: read file 
/var/lib/spamassassin/3.002003/70_sare_bayes_poison_nxm_cf_s
are_sa-updat
e_dostech_net.cf
[10813] dbg: plugin: loading
Mail::SpamAssassin::Plugin::Bayes from INC

[10813] dbg: bayes: using username: amavis
[10813] dbg: bayes: database connection established
[10813] dbg: bayes: found bayes db version 3
[10813] dbg: bayes: Using userid: 10

it seems spamassassin is connecting to the db fine

sa-learn --dump magic
0.000          0          3          0  non-token data:
bayes db version
0.000          0      32207          0  non-token data:
nspam
0.000          0      22869          0  non-token data:
nham
0.000          0     153536          0  non-token data:
ntokens
0.000          0 1191258345          0  non-token data:
oldest atime
0.000          0 1192642924          0  non-token data:
newest atime
0.000          0          0          0  non-token data: last
journal 
sync atime
0.000          0 1192640737          0  non-token data: last
expiry
atime
0.000          0    1382400          0  non-token data: last
expire 
atime delta
0.000          0       2744          0  non-token data: last
expire 
reduction count

this also shows sufficient tokens to at least do something
with (db was 
reset after I switched to MySQL)

the X- headers from a known spam message look like this:

X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2800.1437
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441
X-Virus-Scanned: Maia Mailguard 1.0.2a
X-Spam-Status: No, hits=1.61 tagged_above=1 required=5 
tests=FM_PORN_A_4=1.09,
SARE_BADGIRLS=0.52
X-Spam-Level: *

there are no bayes checks in here, and not in any other
message either, 
so im a bit worried.
I thought rebuilding the database would only take a short
while but 
still only a few percent of the mail is being caught, and
only because 
everything besides bayes is doing a good job.

today I tried to turn the old DB back on, ran some tests but
came out 
with thesame result.
I have no idea how to get Bayes working again, went trough a
lot of 
docs, including the one I used to set this up in the first
place, but 
couldnt fix it with any one of them.

Rgds,

Michiel van den Berg



_______________________________________________
Maia-users mailing list
Maia-usersrenaissoft.com
http://www.renaissoft.com/mailman/listinfo/maia-users
_______________________________________________
Maia-users mailing list
Maia-usersrenaissoft.com
http://www.renaissoft.com/mailman/listinfo/maia-users
Re: Spamassassin -> Bayes not working?
country flaguser name
Netherlands		 2007-10-19 05:24:45 

  


  

    

Hi,


 


Can you run amavisd with the debug-sa flag to see what happends when a mail is processed ?


 


Jeffrey Schilperoord



 








Van: maia-users-bouncesrenaissoft.com namens Michiel van den Berg
Verzonden: vr 19-10-2007 12:14
Aan: Maia
Onderwerp: Re: [Maia-users] Spamassassin -> Bayes not working?





Does anyone have any idea ?

Rgds,

Michiel van den Berg

-----Oorspronkelijk bericht-----
Van: maia-users-bouncesrenaissoft.com
[ maia-users-bouncesrenaissoft.com">mailto:maia-users-bouncesrenaissoft.com] Namens Michiel van den Berg
Verzonden: donderdag 18 oktober 2007 19:10
Aan: Maia
Onderwerp: [Maia-users] Spamassassin -> Bayes not working?

Hi

ive been using maia for quite some time now and switched to bayes in
MySQL a while ago. this all seemed to go fine, but since I fiddled with
it bayes doesnt seem to work anymore, I dont get any bayes headers and
also when I run spamassassin outside of amavis I dont see any bayes
checks come up and my test messages dont get any score at all. the whole

system is running on tripwire, razor and sare rules alone now.

Relevant output from spamassassin -D --lint (everything I could find on
bayes)

[10813] dbg: generic: SpamAssassin version 3.2.3
[10813] dbg: config: read file
/var/lib/spamassassin/3.002003/70_sare_bayes_poison_nxm_cf_sare_sa-updat
e_dostech_net.cf
[10813] dbg: plugin: loading Mail::SpamAssassin::Plugin::Bayes from INC

[10813] dbg: bayes: using username: amavis
[10813] dbg: bayes: database connection established
[10813] dbg: bayes: found bayes db version 3
[10813] dbg: bayes: Using userid: 10

it seems spamassassin is connecting to the db fine

sa-learn --dump magic
0.000          0         ; 3         ; 0  non-token data: bayes db version
0.000       ;   0      32207 ;         0  non-token data: nspam
0.000          0      22869 ;         0  non-token data: nham
0.000  ;        0     153536          0  non-token data: ntokens
0.000       ;   0 1191258345  ;        0  non-token data: oldest atime
0.000          0 1192642924  ;        0  non-token data: newest atime
0.000          0         ; 0         ; 0  non-token data: last journal
sync atime
0.000          0 1192640737  ;        0  non-token data: last expiry
atime
0.000        ;  0    1382400        ;  0  non-token data: last expire
atime delta
0.000          0       2744   ;       0  non-token data: last expire
reduction count

this also shows sufficient tokens to at least do something with (db was
reset after I switched to MySQL)

the X- headers from a known spam message look like this:

X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 6.00.2800.1437
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441
X-Virus-Scanned: Maia Mailguard 1.0.2a
X-Spam-Status: No, hits=1.61 tagged_above=1 required=5
tests=FM_PORN_A_4=1.09,
SARE_BADGIRLS=0.52
X-Spam-Level: *

there are no bayes checks in here, and not in any other message either,
so im a bit worried.
I thought rebuilding the database would only take a short while but
still only a few percent of the mail is being caught, and only because
everything besides bayes is doing a good job.

today I tried to turn the old DB back on, ran some tests but came out
with thesame result.
I have no idea how to get Bayes working again, went trough a lot of
docs, including the one I used to set this up in the first place, but
couldnt fix it with any one of them.

Rgds,

Michiel van den Berg



_______________________________________________
Maia-users mailing list
Maia-usersrenaissoft.com
http://www.renaissoft.com/mailman/listinfo/maia-users
_______________________________________________
Maia-users mailing list
Maia-usersrenaissoft.com
http://www.renaissoft.com/mailman/listinfo/maia-users

  

  
  
   
     
    

  

    Re:  Spamassassin -> Bayes not
working?
  


  

     country flaguser name
Netherlands		
     2007-10-19 06:50:03
  


  

    

  


  

    





I have been running it
for a bit now on the debug-sa mode. It generates a lot of output, while reading
trough it I can find that on startup, it connects to the SQL for both bayes and
the AWL but in the mail checks I can not find anything related to bayes checks.
It does auto learn and when it runs trough that I do see sql output about
duplicate keys am assuming this is normal.



 



Are there any specific
lines I should look for? As I don’t have a working situation at the
moment I have no clue what lines ‘should’ be there.



 



Rgds,



 



Michiel van den Berg




 
















Van: Jeffrey
Schilperoord [mailto:jeffreyschilperoord.org] 

Verzonden: vrijdag 19 oktober 2007
12:25

Aan: Michiel van den Berg; Maia

Onderwerp: RE: [Maia-users]
Spamassassin -> Bayes not working?







 









Hi,










 









Can you run amavisd with the debug-sa flag to see what
happends when a mail is processed ?












 









Jeffrey Schilperoord











 

























Van:
maia-users-bouncesrenaissoft.com namens Michiel van den Berg

Verzonden: vr 19-10-2007 12:14

Aan: Maia

Onderwerp: Re: [Maia-users] Spamassassin
-> Bayes not working?










Does
anyone have any idea ?



Rgds,



Michiel van den Berg



-----Oorspronkelijk bericht-----

Van: maia-users-bouncesrenaissoft.com

[ maia-users-bouncesrenaissoft.com">mailto:maia-users-bouncesrenaissoft.com]
Namens Michiel van den Berg

Verzonden: donderdag 18 oktober 2007 19:10

Aan: Maia

Onderwerp: [Maia-users] Spamassassin -> Bayes not working?




Hi




ive been using maia for quite some time now and switched to bayes in

MySQL a while ago. this all seemed to go fine, but since I fiddled with

it bayes doesnt seem to work anymore, I dont get any bayes headers and

also when I run spamassassin outside of amavis I dont see any bayes

checks come up and my test messages dont get any score at all. the whole




system is running on tripwire, razor and sare rules alone now.



Relevant output from spamassassin -D --lint (everything I could find on

bayes)



[10813] dbg: generic: SpamAssassin version 3.2.3

[10813] dbg: config: read file

/var/lib/spamassassin/3.002003/70_sare_bayes_poison_nxm_cf_sare_sa-updat

e_dostech_net.cf

[10813] dbg: plugin: loading Mail::SpamAssassin::Plugin::Bayes from INC



[10813] dbg: bayes: using username: amavis

[10813] dbg: bayes: database connection established

[10813] dbg: bayes: found bayes db version 3

[10813] dbg: bayes: Using userid: 10



it seems spamassassin is connecting to the db fine



sa-learn --dump magic

0.000       ;  
0   ;      
3          0  non-token data:
bayes db version

0.000   ;      
0     
32207  ;        0  non-token

data: nspam

0.000       ;  
0   ;  
22869      ;    0  non-token

data: nham

0.000         ;
0    
153536       ;   0  non-token

data: ntokens

0.000   ;       0
1191258345       ;   0 
non-token data: oldest atime

0.000       ;   0
1192642924       ;   0 
non-token data: newest atime

0.000       ;  
0   ;      
0          0  non-token data:
last journal

sync atime

0.000       ;   0
1192640737       ;   0 
non-token data: last expiry

atime

0.000          0   
1382400          0  non-token

data: last expire

atime delta

0.000       ;  
0   ;   
2744       ;   0  non-token

data: last expire

reduction count




this also shows sufficient tokens to at least do something with (db was

reset after I switched to MySQL)



the X- headers from a known spam message look like this:




X-Priority: 3

X-MSMail-Priority: Normal

X-Mailer: Microsoft Outlook Express 6.00.2800.1437

X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441

X-Virus-Scanned: Maia Mailguard 1.0.2a

X-Spam-Status: No, hits=1.61 tagged_above=1 required=5

tests=FM_PORN_A_4=1.09,

SARE_BADGIRLS=0.52

X-Spam-Level: *



there are no bayes checks in here, and not in any other message either,

so im a bit worried.


I thought rebuilding the database would only take a short while but

still only a few percent of the mail is being caught, and only because

everything besides bayes is doing a good job.



today I tried to turn the old DB back on, ran some tests but came out

with thesame result.

I have no idea how to get Bayes working again, went trough a lot of

docs, including the one I used to set this up in the first place, but

couldnt fix it with any one of them.




Rgds,




Michiel van den Berg







_______________________________________________


Maia-users mailing list

Maia-usersrenaissoft.com

http://www.renaissoft.com/mailman/listinfo/maia-users

_______________________________________________

Maia-users mailing list

Maia-usersrenaissoft.com

http://www.renaissoft.com/mailman/listinfo/maia-users










  

  
  
   
     
    

  

    Re:  Spamassassin -> Bayes not
working?
  


  

     country flaguser name
Netherlands		
     2007-10-19 09:53:38
  


  

    

  


  

    





[79923] dbg: bayes: database connection established



[79923] dbg: bayes: found bayes db version 3



[79923] dbg: bayes: Using userid: 2



[79923] dbg: bayes: corpus size: nspam = 2228, nham = 2503



[79923] dbg: bayes: tok_get_all: token count: 86



[79923] dbg: bayes: score = 0.000272016590371404



[79923] dbg: bayes: DB expiry: tokens in DB: 147868, Expiry max
size: 150000, Oldest atime: 1189984307, Newest atime: 1192805478, Last expire:
1192753505, Current time: 1192805478



 



These are the bayes Lines that pop up on my system when
recieving mail (in debug-sa mode).  I think we should look for something like
that.



 



Greetings,



 



Jeffrey Schilperoord



 









Van: maia-users-bouncesrenaissoft.com
[mailto:maia-users-bouncesrenaissoft.com] Namens Michiel van den Berg

Verzonden: vrijdag 19 oktober 2007 13:50

Aan: Maia

Onderwerp: Re: [Maia-users] Spamassassin -> Bayes not working?









 




I have been running it for a bit now on the debug-sa mode. It
generates a lot of output, while reading trough it I can find that on startup,
it connects to the SQL for both bayes and the AWL but in the mail checks I can
not find anything related to bayes checks. It does auto learn and when it runs
trough that I do see sql output about duplicate keys am assuming this is
normal.



 



Are there any specific lines I should look for? As I don’t have a
working situation at the moment I have no clue what lines ‘should’ be there.



 



Rgds,




 



Michiel van den Berg



 















Van: Jeffrey
Schilperoord [mailto:jeffreyschilperoord.org] 

Verzonden: vrijdag 19 oktober 2007 12:25

Aan: Michiel van den Berg; Maia

Onderwerp: RE: [Maia-users] Spamassassin -> Bayes not working?






 










Hi,










 










Can you run
amavisd with the debug-sa flag to see what happends when a mail is processed ?













 










Jeffrey
Schilperoord











 
























Van: maia-users-bouncesrenaissoft.com namens
Michiel van den Berg

Verzonden: vr 19-10-2007 12:14

Aan: Maia

Onderwerp: Re: [Maia-users] Spamassassin -> Bayes not working?









Does anyone have any idea ?



Rgds,



Michiel van den Berg



-----Oorspronkelijk bericht-----

Van: maia-users-bouncesrenaissoft.com

[ maia-users-bouncesrenaissoft.com">mailto:maia-users-bouncesrenaissoft.com]
Namens Michiel van den Berg

Verzonden: donderdag 18 oktober 2007 19:10

Aan: Maia

Onderwerp: [Maia-users] Spamassassin -> Bayes not working?




Hi




ive been using maia for quite some time now and switched to bayes in

MySQL a while ago. this all seemed to go fine, but since I fiddled with

it bayes doesnt seem to work anymore, I dont get any bayes headers and

also when I run spamassassin outside of amavis I dont see any bayes

checks come up and my test messages dont get any score at all. the whole




system is running on tripwire, razor and sare rules alone now.



Relevant output from spamassassin -D --lint (everything I could find on

bayes)



[10813] dbg: generic: SpamAssassin version 3.2.3

[10813] dbg: config: read file

/var/lib/spamassassin/3.002003/70_sare_bayes_poison_nxm_cf_sare_sa-updat

e_dostech_net.cf

[10813] dbg: plugin: loading Mail::SpamAssassin::Plugin::Bayes from INC



[10813] dbg: bayes: using username: amavis

[10813] dbg: bayes: database connection established

[10813] dbg: bayes: found bayes db version 3

[10813] dbg: bayes: Using userid: 10



it seems spamassassin is connecting to the db fine



sa-learn --dump magic

0.000       ;  
0   ;      
3          0  non-token data:
bayes db version

0.000   ;      
0     
32207  ;        0  non-token

data: nspam

0.000       ;  
0   ;  
22869      ;    0  non-token

data: nham

0.000         ;
0    
153536       ;   0  non-token

data: ntokens

0.000   ;       0
1191258345       ;   0 
non-token data: oldest atime

0.000       ;   0
1192642924       ;   0 
non-token data: newest atime

0.000       ;  
0   ;      
0          0  non-token data:
last journal

sync atime

0.000       ;   0
1192640737       ;   0 
non-token data: last expiry

atime

0.000          0   
1382400          0  non-token

data: last expire

atime delta

0.000       ;  
0   ;   
2744       ;   0  non-token

data: last expire

reduction count




this also shows sufficient tokens to at least do something with (db was

reset after I switched to MySQL)



the X- headers from a known spam message look like this:




X-Priority: 3

X-MSMail-Priority: Normal

X-Mailer: Microsoft Outlook Express 6.00.2800.1437

X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441

X-Virus-Scanned: Maia Mailguard 1.0.2a

X-Spam-Status: No, hits=1.61 tagged_above=1 required=5

tests=FM_PORN_A_4=1.09,

SARE_BADGIRLS=0.52

X-Spam-Level: *



there are no bayes checks in here, and not in any other message either,

so im a bit worried.


I thought rebuilding the database would only take a short while but

still only a few percent of the mail is being caught, and only because

everything besides bayes is doing a good job.



today I tried to turn the old DB back on, ran some tests but came out

with thesame result.

I have no idea how to get Bayes working again, went trough a lot of

docs, including the one I used to set this up in the first place, but

couldnt fix it with any one of them.




Rgds,




Michiel van den Berg







_______________________________________________


Maia-users mailing list

Maia-usersrenaissoft.com

http://www.renaissoft.com/mailman/listinfo/maia-users

_______________________________________________

Maia-users mailing list

Maia-usersrenaissoft.com

http://www.renaissoft.com/mailman/listinfo/maia-users









  

  
  
   
     
    

  

    Re:  Spamassassin -> Bayes not
working?
  


  

     country flaguser name
Netherlands		
     2007-10-19 09:59:26
  


  

    

  


  

    





With me only these:



 



[10813] dbg: bayes: using username: amavis

[10813] dbg: bayes: database connection established

[10813] dbg: bayes: found bayes db version 3

[10813] dbg: bayes: Using userid: 10




 



Rules show up. Nothing else on bayes L if you want I can send a full log. But
im wondering how I can debug ‘just’ bayes.



 



Michiel van den Berg




 
















Van:
Jeffrey Schilperoord [mailto:jeffreyschilperoord.org] 

Verzonden: vrijdag 19 oktober 2007
16:54

Aan: Michiel van den Berg;
Maia-usersrenaissoft.com

Onderwerp: RE: [Maia-users]
Spamassassin -> Bayes not working?







 



[79923] dbg: bayes:
database connection established



[79923] dbg: bayes:
found bayes db version 3



[79923] dbg: bayes:
Using userid: 2



[79923] dbg: bayes:
corpus size: nspam = 2228, nham = 2503




[79923] dbg: bayes:
tok_get_all: token count: 86




[79923] dbg: bayes:
score = 0.000272016590371404



[79923] dbg: bayes:
DB expiry: tokens in DB: 147868, Expiry max size: 150000, Oldest atime:
1189984307, Newest atime: 1192805478, Last expire: 1192753505, Current time:
1192805478



 



These are the bayes
Lines that pop up on my system when recieving mail (in debug-sa mode).  I
think we should look for something like that.



 



Greetings,



 



Jeffrey Schilperoord



 









Van:
maia-users-bouncesrenaissoft.com [mailto:maia-users-bouncesrenaissoft.com] Namens Michiel van den Berg

Verzonden: vrijdag 19 oktober 2007
13:50

Aan: Maia

Onderwerp: Re: [Maia-users]
Spamassassin -> Bayes not working?










 



I have been running it
for a bit now on the debug-sa mode. It generates a lot of output, while reading
trough it I can find that on startup, it connects to the SQL for both bayes and
the AWL but in the mail checks I can not find anything related to bayes checks.
It does auto learn and when it runs trough that I do see sql output about
duplicate keys am assuming this is normal.



 



Are there any specific
lines I should look for? As I don’t have a working situation at the
moment I have no clue what lines ‘should’ be there.



 



Rgds,



 



Michiel van den Berg




 
















Van: Jeffrey
Schilperoord [mailto:jeffreyschilperoord.org] 

Verzonden: vrijdag 19 oktober 2007
12:25

Aan: Michiel van den Berg; Maia

Onderwerp: RE: [Maia-users] Spamassassin
-> Bayes not working?







 









Hi,










 









Can you run amavisd with the debug-sa flag to see what
happends when a mail is processed ?












 









Jeffrey Schilperoord











 

























Van:
maia-users-bouncesrenaissoft.com namens Michiel van den Berg

Verzonden: vr 19-10-2007 12:14

Aan: Maia

Onderwerp: Re: [Maia-users]
Spamassassin -> Bayes not working?










Does
anyone have any idea ?



Rgds,



Michiel van den Berg



-----Oorspronkelijk bericht-----

Van: maia-users-bouncesrenaissoft.com

[ maia-users-bouncesrenaissoft.com">mailto:maia-users-bouncesrenaissoft.com]
Namens Michiel van den Berg

Verzonden: donderdag 18 oktober 2007 19:10

Aan: Maia

Onderwerp: [Maia-users] Spamassassin -> Bayes not working?




Hi




ive been using maia for quite some time now and switched to bayes in

MySQL a while ago. this all seemed to go fine, but since I fiddled with

it bayes doesnt seem to work anymore, I dont get any bayes headers and

also when I run spamassassin outside of amavis I dont see any bayes

checks come up and my test messages dont get any score at all. the whole




system is running on tripwire, razor and sare rules alone now.



Relevant output from spamassassin -D --lint (everything I could find on

bayes)



[10813] dbg: generic: SpamAssassin version 3.2.3

[10813] dbg: config: read file

/var/lib/spamassassin/3.002003/70_sare_bayes_poison_nxm_cf_sare_sa-updat

e_dostech_net.cf

[10813] dbg: plugin: loading Mail::SpamAssassin::Plugin::Bayes from INC



[10813] dbg: bayes: using username: amavis

[10813] dbg: bayes: database connection established

[10813] dbg: bayes: found bayes db version 3

[10813] dbg: bayes: Using userid: 10



it seems spamassassin is connecting to the db fine



sa-learn --dump magic

0.000       ;  
0   ;      
3          0  non-token data:
bayes db version

0.000   ;      
0     
32207  ;        0  non-token

data: nspam

0.000       ;  
0   ;  
22869      ;    0  non-token

data: nham

0.000         ;
0    
153536       ;   0  non-token

data: ntokens

0.000   ;       0
1191258345       ;   0 
non-token data: oldest atime

0.000       ;   0 1192642924  ;       

0  non-token data: newest atime

0.000       ;  
0   ;      
0          0  non-token data:
last journal

sync atime

0.000       ;   0
1192640737       ;   0 
non-token data: last expiry

atime

0.000          0   
1382400          0  non-token

data: last expire

atime delta

0.000       ;  
0   ;   
2744       ;   0  non-token

data: last expire

reduction count




this also shows sufficient tokens to at least do something with (db was

reset after I switched to MySQL)



the X- headers from a known spam message look like this:




X-Priority: 3

X-MSMail-Priority: Normal

X-Mailer: Microsoft Outlook Express 6.00.2800.1437

X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1441

X-Virus-Scanned: Maia Mailguard 1.0.2a

X-Spam-Status: No, hits=1.61 tagged_above=1 required=5

tests=FM_PORN_A_4=1.09,

SARE_BADGIRLS=0.52

X-Spam-Level: *



there are no bayes checks in here, and not in any other message either,

so im a bit worried.


I thought rebuilding the database would only take a short while but

still only a few percent of the mail is being caught, and only because

everything besides bayes is doing a good job.



today I tried to turn the old DB back on, ran some tests but came out

with thesame result.

I have no idea how to get Bayes working again, went trough a lot of

docs, including the one I used to set this up in the first place, but

couldnt fix it with any one of them.




Rgds,




Michiel van den Berg







_______________________________________________


Maia-users mailing list

Maia-usersrenaissoft.com

http://www.renaissoft.com/mailman/listinfo/maia-users

_______________________________________________

Maia-users mailing list

Maia-usersrenaissoft.com

http://www.renaissoft.com/mailman/listinfo/maia-users










  

  
  
   
     
    

  

    Re:  Spamassassin -> Bayes not
working?
  


  

     country flaguser name
United States		
     2007-10-19 12:00:06
  


  

    
On Fri, 2007-10-19 at 16:59 +0200, Michiel van den Berg
wrote:
> With me only these:
> 
>  
> 
> [10813] dbg: bayes: using username: amavis
> [10813] dbg: bayes: database connection established
> [10813] dbg: bayes: found bayes db version 3
> [10813] dbg: bayes: Using userid: 10

It sure looks like you don't actually have bayes turned on
in
SpamAssassin (local.cf file). Here's what mine looks like:

use_bayes 1
use_bayes_rules 1

bayes_auto_expire 0

bayes_store_module               
Mail::SpamAssassin::BayesStore::MySQL
bayes_sql_dsn                    
DBI:mysql:maia:ndirdns.ucar.edu:3306
bayes_sql_username                amavis
bayes_sql_password                ******* (actual DB
password goes here)
bayes_sql_override_username       amavis


--Greg


_______________________________________________
Maia-users mailing list
Maia-usersrenaissoft.com
http://www.renaissoft.com/mailman/listinfo/maia-users



  


  

    
  

  
  
   
     
    

  

    Re:  Spamassassin -> Bayes not
working?
  


  

     country flaguser name
Netherlands		
     2007-10-22 02:10:45
  


  

    
Use_bayes is 1 by default, use_bayes_rules also. In my old
config (older
version of spamassassin) I had set both to 1 manually also,
but upon
reinstalling spamassassin Friday and getting the new config,
both were
commented out in the config, with the line above what the
default
setting was.

Rgds,

Michiel

-----Oorspronkelijk bericht-----
Van: Greg Woods [mailto:woodsucar.edu] 
Verzonden: vrijdag 19 oktober 2007 19:00
Aan: Michiel van den Berg
CC: Maia-usersrenaissoft.com
Onderwerp: Re: [Maia-users] Spamassassin -> Bayes not
working?

On Fri, 2007-10-19 at 16:59 +0200, Michiel van den Berg
wrote:
> With me only these:
> 
>  
> 
> [10813] dbg: bayes: using username: amavis
> [10813] dbg: bayes: database connection established
> [10813] dbg: bayes: found bayes db version 3
> [10813] dbg: bayes: Using userid: 10

It sure looks like you don't actually have bayes turned on
in
SpamAssassin (local.cf file). Here's what mine looks like:

use_bayes 1
use_bayes_rules 1

bayes_auto_expire 0

bayes_store_module               
Mail::SpamAssassin::BayesStore::MySQL
bayes_sql_dsn                    
DBI:mysql:maia:ndirdns.ucar.edu:3306
bayes_sql_username                amavis
bayes_sql_password                ******* (actual DB
password goes here)
bayes_sql_override_username       amavis


--Greg


_______________________________________________
Maia-users mailing list
Maia-usersrenaissoft.com
http://www.renaissoft.com/mailman/listinfo/maia-users



  


  

    
  

  
  
   
     
    






 [1-8]











   
 





about | contact  Other archives ( Real Estate discussion Medical topics )