Re: Megaco - Pulse metering and Public Phone doubt

6. Automatic Metering Package
   
   PackageID: amet (0x????)
   Version: 1
   Extends: None
   
This package supports the automated application of repetitive metering pulses to an analog line termination.  It provides a facility whereby the actual number of metering pulses applied to the termination can be periodically reported to the MGC for verification purposes.

"Luiz Figueiredo" <luiz.figueiredoutstar.com> 11/04/2007 19:37

To:  ;      <megacoietf.org&gt;         cc:  ;               Subject:        [Megaco] Megaco -  Pulse metering and Public Phone doubt

Hi All,
 
I work in UTStarcom Company and at the moment we are doing some customizations in our soft switch to specific markets.

 Please, you could help me with a doubt.

In some markets we have the pulse metering to charge the subscriber and normally who send this pulse is the end point, for example an Access Gateway, this pulse is send to subscriber with frequency T, but for this end point generates this pulse it need receive some Megaco message from soft switch. What is the appropriate Megaco message and command should be used in this case?

Other question about Semi Public Phones, this type of equipament there is and some regions and they have a hardware key where in the position 1 it works as a Public Phone and position 2 it works as a Ordinary Phone. The end point check if this is working as Public or Ordinary and need send this information to soft switch using Megaco protocol. What is the appropriete magaco message and command should be used?

Thanks in advanced,

Luiz_______________________________________________
Megaco mailing list
Megacoietf.org
https://www1.ietf.org/mailman/listinfo/megaco