I have an old IBM ThinkPad 380ED[1] on which I run
FreeBSD[2].
FreeBSD 4.11 worls great, as long as I enable pccard and
configure it
correctly.
So I tried FreeBSd 7.0-release, but it seems that the PC
Card
controller (or bridge or whatever) isn't detected. from
'pciconf -lv':
none1 pci0:0:19:0: class=0x060500 card=0x00000000
chip=0x11001013 rev=0x07 hdr=0x00
vendor = 'Cirrus Logic'
device = 'CL-PD6729 PCI-to-PC Card host adapter'
class = bridge
subclass = PCI-PCMCIA
Under FreeBSD 4.11 this is detected as:
pcic0 pci0:19:0: class=0x060500 card=0x00000000
chip=0x11001013 rev=0x07 hdr=0x00
vendor = 'Cirrus Logic'
device = 'CL-PD6729 PCI-to-PC Card host adapter'
class = bridge
subclass = PCI-PCMCIA
And the man page for pcic(4) [3] under 4.11 documents it as
supported.
The same man page for 7.0 is a bit confusing: [4]. It says
that this is supported,
but in the bugs section says that it doesnt work at all.
pcic doesn't work at all in 7.0?
More info as well as normal and verbose dmesgoutputs in
[2].
Any hints on getting this oldie working?
References:
1) http://tingox.g
ooglepages.com/tp380ed
2) http://
tingox.googlepages.com/tp380ed_freebsd
3) http://www.freebsd.org/cgi/man.cgi
?query=pcic&manpath=FreeBSD+4.11-RELEASE
4) http://www.freebsd.org/cgi/man.cgi?
query=pcic&manpath=FreeBSD+7.0-RELEASE
--
Regards,
Torfinn Ingolfsen
_______________________________________________
freebsd-mobile freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to
"freebsd-mobile-unsubscribe freebsd.org"
|