Linksys WAP54G

Hi all,
Was wondering if anyone here is using mrtg to monitor a
Linksys WAP54G
wireless router. When I snmp walk the device , it only gives
me the
following information:

SNMPv2-MIB::sysDescr.0 = STRING: Linux (none) 2.4.20 #2126
Thu Apr 8
17:13:48 CST 2004 mips
SNMPv2-MIB::sysObjectID.0 = OID:
NET-SNMP-MIB::netSnmpAgentOIDs.10
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (52623385)
6 days,
2:10:33.85
SNMPv2-MIB::sysContact.0 = STRING: serveradmin
SNMPv2-MIB::sysName.0 = STRING: sfap
SNMPv2-MIB::sysLocation.0 = STRING: middle

And nothing else. How do I tell the router to send me all of
its MIB
information ? This is all the information the router gives
me if I use the
read or the read-write strings specified in the gui
coniguration page.

As always, any help is greatly appreciated ....

- Karl

--
Unsubscribe mailto:mrtg-requestlist.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/
mrtg
FAQ         http://faq.mrtg.org   
Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz
.ch/lsg2.cgi