Cisco SAA ipIcmpEcho

No, smokeping only initiates ping from its machine itself. I
want something 
like remote 2nd node ping to 3rd node.



----- Original Message ----- 
From: "MrPaul" <mrpaulargmail.com>
To: "dampened" <cheechewhotmail.com>
Cc: <mrtglist.ee.ethz.ch>
Sent: Saturday, December 23, 2006 1:01 AM
Subject: [mrtg] Re: Cisco SAA ipIcmpEcho


> On 12/22/06, dampened <cheechewhotmail.com> wrote:
>>
>> I just want to plot latency between point-B to
point-C from the SAA
>> result.
>>
>> How can I do it with mrtg? The mibs is confusing.
>
> Will something like Smoke Ping (http://oss.oetiker.c
h/smokeping/) work for
> you?
>
> Paul
>
>
> --
> Unsubscribe mailto:mrtg-requestlist.ee.ethz.ch?subject=unsubscribe
> Archive     http://lists.ee.ethz.ch/
mrtg
> FAQ         http://faq.mrtg.org   
Homepage     http://www.mrtg.org
> WebAdmin    http://lists.ee.ethz
.ch/lsg2.cgi
>
> 

--
Unsubscribe mailto:mrtg-requestlist.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/
mrtg
FAQ         http://faq.mrtg.org   
Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz
.ch/lsg2.cgi

Hello,
I use SAA monitor type jitter, which is ideal for measuring
of
Roundtriptime, Packet loss, Jitter and in newer IOSes One
way latency.

This is configuration on Cisco with SAA support.
I use C1721 with c1700-y-mz.124-3.bin IOS.
-------------------
ip sla monitor 101
 type jitter dest-ipaddr 192.168.1.2 dest-port 14384
num-packets 3000
 request-data-size 500
 frequency 300
ip sla monitor schedule 101 life forever start-time now
-------------------
On Cisco 192.168.1.2 I have enabled RTR responder:
-------------
rtr responder
-------------

In attachment is example of MRTG configuration for measuring
SAA from
Cisco router. I don't know, if it will go through
mailing-list.

Complete OID branch with Latest jitter parameters is here: 
1.3.6.1.4.1.9.9.42.1.5.2.1
There is link to Cisco web, which probably require password
for access:
http://tools.cisco.com/Support/SNMP
/do/BrowseOID.do?objectInput=1.3.6.1.4.1.9.9.42.1.5.2.1&
translate=Translate&submitValue=SUBMIT

Best regards,

Pavel Ruzicka


-- Attached file removed by Ecartis and put at URL below --
-- Type: text/plain
-- Size: 6k (6257 bytes)
-- URL : http://lists.ee.
ethz.ch/p/slacfg.txt


--
Unsubscribe mailto:mrtg-requestlist.ee.ethz.ch?subject=unsubscribe
Archive     http://lists.ee.ethz.ch/
mrtg
FAQ         http://faq.mrtg.org   
Homepage     http://www.mrtg.org
WebAdmin    http://lists.ee.ethz
.ch/lsg2.cgi