specs clarifications

On Mon, Jul 24, 2006 at 04:32:37PM +0200, Baptiste Coudurier
wrote:
> Hi
> 
> I just read the specs again, and I read that:
> 
> "   dts is calculated by using a decode_delay+1
sized buffer for each
>     stream, into which the current pts is inserted and
the element with
>     the smallest value is removed, this is then the
current dts
>     this buffer is initalized with decode_delay -1
elements  "
> 
> Does that mean with (decode_delay - 1) elements, or
with decode_delay
> elements, of value -1 ? IMHO that sentence is a bit
ambiguous.

It means the latter but yes it should be fixed.

Rich

_______________________________________________
NUT-devel mailing list
NUT-develmplayerhq.hu

http://lists.mplayerhq.hu/mailman/listinfo/nut-devel